Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 503 for “"Screws"”.

  1. Cleaning Protocol for Implant Abutment Screws

    … effective cleaning protocol for implant abutment screws that are used throughout the fabrication of an implant restoration in the dental laboratory. Materials and Methods: Ninety (90) implant abutment screws (Biohorizons PXAS®) were collected from different dental laboratories after abutment …

    uab Repository record for Cleaning Protocol for Implant Abutment Screws (opens in a new tab)

  2. Standoff Screws Used In Composite Joists

    … shear connector in composite joists. Standoff screws are being investigated as an alternative to welded shear studs in short span composite joists. The data and results obtained from 106 pushout tests performed on the Elco Grade 8 standoff screw are presented. The test parameters include: …

    vt Repository record for Standoff Screws Used In Composite Joists (opens in a new tab)

  3. Biodegradable PDLLA screws in mandibular sagittal split osteotomies

    zurich Restricted access

  4. Destructive disassembly of bolts and screws using impact

    Disassembly, the process of separating parts or components at the end of their useful life is complex due to a variety of fastener shapes and variability in their damage during use. As a natural solution, mechanical impact has been suggested as a cost-effective method for destructive disassembly of …

    njit Repository record for Destructive disassembly of bolts and screws using impact (opens in a new tab)

  5. Experiments of the strength of bolts and screws

    Made available in DSpace on 2017-11-30T22:46:06Z (GMT). No. of bitstreams: 2 5971943.pdf: 8852576 bytes, checksum: e38d7011ba3bf6eb7cefbb8c2f09e794 (MD5) license.txt: 4813 bytes, checksum: 715c4321821a960fa1a1e91d2ac7ebce (MD5) Previous issue date: 1910

    uiuc Repository record for Experiments of the strength of bolts and screws (opens in a new tab)

  6. Combined loading of angled screws in timber connections A study to evaluate the stiffness and load-carrying capacity of inclined screws

    … force orientation. For connections with inclined screws, this behaviour is not fully reflected on in the current design standards. Therefore, the aim of this thesis is to study the combined loading of angled screws in timber-timber connections by evaluating the slip modulus and load-carrying …

    chalmers Repository record for Combined loading of angled screws in timber connections A study to evaluate the stiffness and load-carrying capacity of inclined screws (opens in a new tab)

  7. Designing screws for polymer compounding in twin-screw extruders

    Considering its modular construction, co-rotating twin screw extruders can be easily adapted to work with polymeric systems with more stringent specifications. However, their geometrical flexibility makes the performance of these machines strongly dependent on the screw configuration. Therefore, …

    minho-thes Repository record for Designing screws for polymer compounding in twin-screw extruders (opens in a new tab)

  8. Strength Calculation Model for Standoff Screws in Composite Joists

    … tests utilizing the ELCO Grade 8 standoff screws. The goal is to develop a strength prediction equation and determine reliability parameters compatible with the Load Factor Resistance Design (LRFD) procedure that would allow the use of this shear connector in design of composite floor …

    vt Repository record for Strength Calculation Model for Standoff Screws in Composite Joists (opens in a new tab)

  9. Further Investigation of Standoff Screws Used in Composite Joists

    … shear connector in composite joists. Standoff screws are being investigated as viable an alternative to welded shear studs in short span composite joists. The data and results obtained from 59 pushout tests performed on the 5/16 in. diameter Elco Grade 8 standoff screw are presented. The test …

    vt Repository record for Further Investigation of Standoff Screws Used in Composite Joists (opens in a new tab)

  10. Characterization of Micro-Machining of Dental Screws and Abutments

    … dental implants, specifically the abutments and screws. The objective is to compare material properties of prototype and market components to determine if the prototype components have adequate quality. Furthermore, simulated models are developed for predicting material property changes due to …

    ottawa-retro Repository record for Characterization of Micro-Machining of Dental Screws and Abutments (opens in a new tab)

  11. Standoff screws functioning as mechanical shear connectors in composite joists

    The results of sixty-five double-sided pushout tests utilizing the Elco grade 8, 5/16 in. diameter, standoff screw functioning as a mechanical shear connector are presented. In all tests, the base material, through which the screw was fastened, was fabricated out of back to back angle to simulate …

    vt Repository record for Standoff screws functioning as mechanical shear connectors in composite joists (opens in a new tab)

  12. An integrated system for ultrasound-based surgical navigation of iliosacral screws

    … The conventional method for placing iliosacral screws (ISS) in the pelvis relies heavily on intraoperative fluoroscopy. However, due to the narrow sacral passage the screw must pass through, this technique is susceptible to high rates of screw malplacement which can lead to iatrogenic …

    ubc Repository record for An integrated system for ultrasound-based surgical navigation of iliosacral screws (opens in a new tab) Download PDF for An integrated system for ultrasound-based surgical navigation of iliosacral screws (opens in a new tab)

  13. Pull-out resistance of self-tapping wood screws with continuous thread

    … the pull-out resistance of self-tapping wood screws with continuous thread, a new type of fastener that can be used as a fastener, but also as reinforcement considering Canadian major wood species. Utilizing its high withdrawal capacity and high tensile strength, this type of connector can …

    ubc Repository record for Pull-out resistance of self-tapping wood screws with continuous thread (opens in a new tab) Download PDF for Pull-out resistance of self-tapping wood screws with continuous thread (opens in a new tab)

  14. Bending fatigue of cancellous bone screws used in anterior spine surgery.

    … diameter (3.2mm inside diameter) cancellous bone screws. Fractography was used to qualify and quantify the failure mode. Fracture mechanics was used to determine the load level from the fractographic findings. These results were used in a test program to reproduce the fatigue failures seen …

    ottawa-retro Repository record for Bending fatigue of cancellous bone screws used in anterior spine surgery. (opens in a new tab)

  15. High Fidelity Model of Ball Screws to Support Model-based Health Monitoring

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for High Fidelity Model of Ball Screws to Support Model-based Health Monitoring (opens in a new tab)

  16. Parallel-to-Grain Withdrawal Resistance of Structural Self-Tapping Screws in Canadian Timber

    … the withdrawal capacity of self-tapping screws (STS) inserted parallel-to-grain. An experimental study was conducted with 100 screws tested in total. The experimental program includes two main test series. First, withdrawal testing was conducted on screws with a diameter of 10 mm with …

    queens Repository record for Parallel-to-Grain Withdrawal Resistance of Structural Self-Tapping Screws in Canadian Timber (opens in a new tab)

  17. Novel biomechanical test method for cancellous bone screws and screw augmentation with cement.

    … loading[17][20][21]. The increased use of locked screws in plate constructs has also changed the loading patterns of bone screws. For this study, a novel “toggle-out” testing method was developed to more realistically simulate in-vivo loading of screw-plate constructs. Our objective was to compare …

    louisville Repository record for Novel biomechanical test method for cancellous bone screws and screw augmentation with cement. (opens in a new tab)

Page 1 of 26