Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 649 for “"Seismic Design"”.
-
Seismic Design of Lightly Reinforced Concrete Walls
… numerical modelling was used to investigate the seismic behaviour of RC walls with minimum vertical reinforcement subjected to simulated earthquake loading. A series of experimental tests highlighted that the minimum distributed vertical reinforcement requirements for RC walls in New Zealand …
-
Seismic design of industrial rack clad buildings
… work has been carried out to determine the seismic performance of these structures. As RCB is a new type of structure, there exists no guideline in the current building codes for designing these structures against seismic loading. Here, a force and a direct displacement based design (DDBD) …
-
Geogrid-soil interaction coefficients for seismic design
Tensar uniaxial geogrids were subjected to load-controlled monotonic and cyclic pullout testing to determine the relative coefficients of interaction. The variables investigated were geogrid series (UX1500SB, UX1400HS, and UX1600HS), soil type (poorly-graded medium fine sand and poorly-graded silty …
-
Seismic Design of a Prestressed Concrete Bridge
… is to examine dynamic responses of bridges in seismic activity with the help of such tool as CSi Bridge. Therefore, throughout this study, a prestressed concrete bridge model will be thoroughly designed. In the first section, the required materials and structural components will be introduced. …
-
Seismic design of drilled shafts in clay
… of soil-foundation-structure-interaction in the seismic design of drilled shafts in cohesive soils. The project identifies and discusses the challenges associated with practice today when determining the lateral load response of bridge columns supported on drilled shafts. After identifying the …
-
Examination of Stochastic Models for Seismic Design
Made available in DSpace on 2014-12-08T23:57:28Z (GMT). No. of bitstreams: 1 7021075.pdf: 1952536 bytes, checksum: 4f2285961f1a4ce61087fcc7311da9fc (MD5) Previous issue date: 1970
-
Displacement-Based Seismic Design of Timber Structures
The research is aimed at developing seismic methods for the design and evaluation of the seismic vulnerability of wooden structures, using a displacement-based approach. After a brief introduction on the seismic behaviour of timber structures, the general Direct Displacement-Based Design …
-
In-plane Seismic Design of Concrete Masonry Structures
… of concrete masonry walls when subjected to seismic loading are presented. Particular emphasis is placed on a computational model that is capable of representing the interaction between flexural ductility and masonry shear strength to account for the reduction in shear strength as ductility …
-
Seismic design of outrigger systems for tall buildings
… structural systems around the world, a formal seismic design procedure for outrigger system is missing. This thesis presents an equivalent energy-based design procedure (EEDP) to design outrigger systems for seismic applications. Using the concept of an energy balance, elastic single-degree of …
-
Seismic Design Manual for Interlocking Compressed Earth Blocks
Seismic Design Manual for Interlocking Compressed Earth Blocks Nicholas Edwards Kennedy This thesis presents a comprehensive seismic design manual to be used to design and construct simple Interlocking Compressed Earth Block (ICEB) structures in seismically active regions. ICEBs are earth blocks …
-
Robust Optimum Seismic Design of Reinforced Concrete Bridges
… emergency supports in aftermath of catastrophic seismic exposure. The urge of engineering community to transition towards sustainable infrastructures highlights the critical role of structural optimisation in design of bridges. This underscores the need for developing a robust optimisation …
-
Seismic Design Studies of Low-Rise Steel Frames
… is dependent on several parameters such as design base shear, beam-to-column strength ratio, moment-resisting connection behavior, nonstructural element participation, etc. The influence of these parameters was determined by performing inelastic time-history analyses.
-
Resilience-based seismic design of innovative mass timber buildings
This thesis aims to advance the seismic design of mass timber buildings by developing a resilience-based design framework based on a multi-objective optimization approach. The utility of the framework is applied to design a 20-storey resilient timber-based structural system. Initially, this thesis …
-
Performance-based seismic design for retrofitting of bridge bents
… performance of a structure under different seismic hazard levels can be obtained by applying the performance-based seismic design (PBSD) approach. Various performance levels and the respective limit states need to be set for employing PBSD. These limit states corresponding to different …
-
Performance-based seismic design of post-tensioned concrete columns
… components of transportation networks. The seismic resistance of bridges not only determines the user safety during earthquakes but also decides the economic recovery of a region after earthquakes. Making bridges earthquake-resistant to provide continuous post earthquake serviceability has …
-
Seismic design of timber steel hybrid high-rise buildings
… This thesis presents research to evaluate the seismic performance of the FFTT hybrid system using experimental methods, numerical modeling, and reliability analysis. The FFTT system was investigated on two levels: i) component design, and ii) system design. On the component level, the strength, …
-
Seismic Design Of Pipe-Pin Connections In Concrete Bridges
… absence of experimental and analytical studies, design of pipe-pin hinges has been based on pure shear capacity of the steel pipe. The primary objective of this research was two folds: (1) to investigate the seismic performance of the current detail of pipe-pin hinges and propose necessary …
Page 1 of 33