Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 69 for “"Selective Etching"”.
-
Extended defects in GaN: Selective etching and optical properties
Contains fulltext : 26978_extedeing.pdf (Publisher’s version ) (Open Access)
-
Development of plasma-based atom selective etching: a novel polishing technique for single-crystal materials
… polishing technique called plasma-based atom selective etching (PASE) is proposed in this thesis. PASE featuring ultrahigh polishing precision could outpace the state-of-the-art polishing method: chemical mechanical polishing (CMP). In this research, the material removal rate of PASE is …
-
In Situ Raman Spectroscopy of the Type Selective Etching of Carbon Nanotubes and Their Growth from C60 Seeds
In situ Raman spectroscopy was used to explore etching of carbon nanotubes as well as their growth from C60. The thesis is in three parts: (1) C60 seed particles were partially oxidized in air and were used to grow carbon nanotubes and other nanocarbon structures. Seed oxidization was characterized …
-
Darinių formavimas kvarco ir safyro tūryje femtosekundiniu lazeriu asistuoto cheminio ėsdinimo metodu /
… laser irradiation followed by chemical etching. The goal was to find the optimal process parameters. It was found, that the best laser parameters for the fastest fused silica selective etching when pulse duration is equal to 270 fs are these: laser pulse energy - 600 nJ, pulse density …
-
Bottom-up Process Development for High Throughput Electronic Device Fabrication
… surfaces and structures for subsequent area selective deposition processes. We coin our process SCALES: Selective CoAxial Lithography via Etching of Surfaces, which is a combination of bottom-up polymerization followed by selective etching. We use vapor-liquid-solid (VLS) grown nanowires as a …
-
Characterization of two-dimensional electrostatic potential profiles in deep submicron MOSFET devices
… spectrometry (SIMS), process simulations, dopant-selective etching, and electron holography. The simulated results were found to be in agreement with the direct measurements of the dopant profiles. In the first study, the dopant distributions in NMOS and PMOS devices, both as-implanted, and …
-
Transmission electron microscopy (TEM) defect characterization in bulk aluminum nitride (AIN) crystals produced by sublimation method
… AlN were identified after they were located by selective etching. This allowed for the calibration of etch pit characteristics (i.e. size and shape) to a specific type of defect present. Etch pits size 1.8ìm had an edge dislocation with a Burgers vector 1/3 . This finding validated defect …
-
Nanostructured Stable Radical Polymer Thin Films: A Battery Electrode Material
… desired morphologies by SVA and graphoepitaxy, selective etching of PTFEMA block is performed using DUV and E-Beam exposure, aimed at improving the electrolyte diffusion and uptake. DUV exposure on homopolymer PTMA crosslinks it by ring-opening of the TEMPO moiety, as confirmed by FT-IR …
-
Mikrodarinių formavimas safyre naudojant femtosekundinio lazerio spinduliuotę ir selektyvų ėsdinimą /
… IN SAPPHIRE BY FS-LASER IRRADIATION AND SELECTIVE ETCHING The formation of three-dimentional microstructures in saphire volume using femtosecond laser and selective laser etching is investigated in this study. The theoretical data about interaction of ultrashort pulses with transparent …
-
Reactive Plasma Etching of Silicon Carbide, Silicon Carbonitride, and Titanium Nitride in a Tetrafluoroethane/Oxygen Plasma
In this study we investigate the etching of the diffusion barrier between the silicon substrate and the 1ow-k dielectric material. We will use silicon carbide (SiC), silicon carbonitride (SiCN), and titanium nitride (TiN) as our diffusion layer. Using the RF plasma and the magnetron gun with …
-
A Novel Method for the Bottom-Up Microstructuring of Silicon and Patterning of Polymers
… this doctoral thesis, a before unseen method of selective etching on silicon was discovered and investigated. Hence, the overall aim of this work was successfully achieved. • Samples containing buried p-implants inside a n-type silicon substrate were characterised with regard to various …
-
Modulation-Doped Field-Effect Transistors for High-Power Microwave Applications
… beam resist technique and sequential wet and dry selective etching. A high linearity of device characteristics is important to minimize intermodulation of high frequency signals under high-power operation. The linearity of device performance is investigated through the comparison of InGaAs/GaAs …
-
A Study of the Role of Low Energy Ions in Causing Damage to III-V Semiconductors in Practical Ion Etching Systems
While dry etching is widely used in the fabrication of advanced III-V semiconductor electronic and optoelectronic devices, the energetic ions employed can inflict damage that impairs the performance of the semiconductor. The avoidance of such material damage is important to ensure the optimum …
-
Deep etching of silicon with xenon difluoride
… (MEMS) requires systems for depositing and selectively removing of parts of a substrate material. The most commonly used material in micromachining of different MEMS devices is silicon. Therefore, depositing and etching of silicon is of great importance in micromachining. One of the …
-
Verspannungsgetriebene Architekturen auf der Basis von Si-Nanomembranen
… all semiconductor or hybrid functional layer. A selective underetching procedure is used to release the nanomembranes from their substrates. The strain profile in the growth direction of the functional layer is one of the key parameters to define the 3D objects forming during the release of the …
-
Silicon microlithography using metastable argon((3)phosphorus(0,2)) atoms
… immersion in a KOH solution results in selective etching of the hydrogen-passivated regions, producing an image of the grid on the Si surface with ∼20 nm feature depths. In the second approach, an octadecylsiloxane self-assembled monolayer (SAM) grown on the native oxide of a Si(100) …
-
Bridging design and manufacturing gap through machine learning and machine-generated layout
… lithography, E-beam lithography (EBL), and selective etching, have been proposed to ensure nano-scale manufacturability. Meanwhile, design configurations keep updating in the pursuit of performance, design flexibility, and cost reduction. Despite such advancement in design and manufacturing, …
-
Electrical and structural characterization of GaAs and Al Ga₋ As gr
… The film cross section has been investigated by selective etching, and microscopy. The selectively etched samples were examined with an alpha step instrument, a scanning electron microscope, and a scanning tunneling microscope which is a new approach. The aluminium mole fraction of Al[formula …
-
Excitation of secondary radiation with high-intensity laser fields and its application in materials science /
… machining and femtosecond laser-assisted selective etching (FLSE) technique. The experimental work was done using the 40 TW, 35 fs laser at the Lund Laser Centre. Using nozzle arrays in injector geometry and combined density down-ramp and ionization injection, quasi-monoenergetic electron …
-
Improving Template-Based Nanomanufacturing of Carbon Nanotube Arrays Via Polishing Wet Etching Method
… the pores and oxygen plasma and reactive ion etching (RIE) expose the tubes by selective etching. The same devices could be produced faster and cheaper by replacing oxygen plasma and RIE with mechanical polishing and wet etching. However, the biomedical utilization of CNT-based technology has …
Page 1 of 4