Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Sensing electrodes"”.
-
BLOOD TYPING DEVICE WITHOUT REAGENTS: SENSING ELECTRODES TO REPLACE OPTICS
… field drives red blood cells over the sensing electrodes and depending on the capacitance measured between pairs of sensing electrodes, the position of these RBCs can be determined. The convergence/divergence of these cells at a particular frequency determines blood type, since each …
-
Design and Fabrication of Nanofluidic Systems with Integrated Sensing Electrodes for Rapid Biomolecule Characterization
A transparent nanofluidic system with embedded sensing electrodes was designed and fabricated by integrating Atomic Force Microscopy (AFM) nanolithography, Focused Ion Beam (FIB) milling and metal deposition, and standard microfabrication processing. The fabrication process started with the …
-
Wearable Biopotential Technologies: An Exploration of Textile Based Biopotential Sensing Electrodes for an ECG Wearable Device
… configurations of e-textiles to serve as both electrodes for signal monitoring and conductive traces and pads for interconnecting hard and soft components. These materials were used for their ability to be integrated into clothing and offer dry sensing, in lieu of the gel electrodes used in …
-
A universal amperometric membrane-covered gas-sensing electrodes system: Measurement of dissolved oxygen, ozone and chlorine dioxide.
A Universal Amperometric Membrane-Covered Gas-Sensing Electrode System has been designed which can be used with a wide variety of electrochemical sensors. The system is composed of two parts: an electrode detection unit consists of an Intel 8051 microprocessor as the control unit which receives …
-
Utilizing the ability of electrochemical NO sensors: micro sensor designs for hypoxic cell cultures
… cells. Consequently, chips containing planar NO sensing electrodes were thin-film fabricated and attached to the bottom of the cell culture flask. Cyclic voltammetric comparison indicated that thin-film gold and platinum-black are stable sensing electrodes for long-term NO measurement. Findings …
-
Detection of Ice and De-Icing/Anti-Icing Fluids on Aircraft Surfaces Using Time Domain Reflectometry
… properties of the fluid in contact with the sensing electrodes. Multiple sensors were constructed and tested to determine the suitability and reliability of varying designs. A software protocol was also developed to detect phase transitions and alert pilots with a binary response that …
-
Microfluidic device for rapid detection of fibrinolysis of blood clots
… fibrin formation based on electrical impedance sensing. A polydimethylsiloxane (PDMS) microfluidic device was designed and fabricated to detect fibrin formation in artificial blood samples (solution of fibrinogen, thrombin and CaCl2) by measuring changes in electrical impedance during the …
-
Microneedle-based lateral flow immunoassays for rapid diagnostic testing
… LFIA system. This device employs interdigitated sensing electrodes and an inductive coil antenna for wireless sensing using an impedance analyzer. A unique detection scheme is employed where the electrical properties of the sensing electrodes are monitored in response to surface immobilization of …
-
Redox cycling for an in-situ enzyme labeled immunoassay on interdigitated array electrodes
… label b-galactosidase. Coplanar and comb IDA electrodes with a 2.4 mm gap were fabricated and their redox cycling currents were measured. ANSYS was used to model steady state currents for electrodes with different geometries. Comb IDA electrodes enhanced the signal about 3 times more than the …
-
CMOS MULTI-MODAL INTEGRATED SYSTEMS FOR FUTURE BIOELECTRONICS AND BIOSENSORS
… in many in vivo and in vitro applications. Since sensing electrodes of the devices are physically in touch with biological/chemical samples and record their signals, long-term biocompatibility and chemical/mechanical stability is of paramount importance in numerous biological applications. …
-
Laser-Induced Graphene Electrochemical Sensors: Plasma Treatment, Lithium-Ion Detection via Printed Surface Modification, and Integrated 3D Printed Microfluidics
… alternative to traditional electrochemical sensing electrodes. It enables a simple, one-step fabrication process that eliminates the need for complex materials or procedures. While LIG has attracted significant attention for various sensing applications, its potential for lithium detection …
-
A Security Framework for Pacemaker Lead Failure: Anomaly Detection System and Failsafe Policy Considerations
… health consequences. These systems rely on sensing electrodes, called leads, to detect cardiac activity and stimulate the patient’s heart when appropriate. Therefore, pacemaker lead integrity is a critical issue, as malfunction or compromise can result in device failure jeopardizing patient …
-
Microfabricated pH, temperature, and free chlorine sensors for integrated drinking water quality monitoring systems
… oxide (Pd/PdO) films as potentiometric pH sensing electrodes. The redox reaction between PdO and hydronium ions generates the sensor output voltage. A large PdO percentage in the film provides a high sensitivity of ~60 mV/pH. A defect-free Pd/PdO film with small roughness contributes to a …
-
New approaches to fuel cell diagnostics
… failure modes). The method is based on micro sensing electrodes (SE) that are placed at appropriate locations in a single cell. These electrodes have a characteristic potential response to each of the failure modes, which enables detection prior to overall fuel cell failure. The specific …
-
Elektrokatalizinis DNR hibridizacijos signalo stiprinimas /
… needed to assess the functionality of prepared sensing electrodes, as well as prove the effectiveness of MB electrocatalysis for hybridization signal amplification. Obtained data were analyzed and visualized using Wolfram Mathematica 11.2. The results showed that ascorbic acid is an effective …
-
Measurement of Rotational Speed and Vibration Through Electrostatic Sensing and Digital Signal Processing
… technical strategy, incorporating electrostatic sensing and digital signal processing techniques is proposed. Mathematical modelling is established and used to determine the characteristics of electrostatic sensors. The results of the model are used to optimise the electrode and markers design. A …
-
Surface Acoustic Waves-Based Point-Of-Care Biosensor
… used transducer-based techniques for the biosensing purpose. The biosensor designing faces numerous challenges such as higher costs, uneasy accessibility, massive and complicated setups, poor reproducibility, the requirement of skilled personnel, and most of all, high sensitivity, and …
-
Tools for Point-of-Care Digital Microfluidics
… on a generic array of hydrophobic insulated electrodes. In DMF, protocols are generated through software and are independent of the microfluidic architecture. DMF can be used to miniaturize and automate routine assays. Of interest are miniaturized medical diagnostic assays that could be …
-
Roll-to-Roll processable organic thin film transistor based circuits and their sensory application
… to avoid interference between transistor and sensing reaction and giving the option for the transistor to be encapsulated from the environment. However, the bias voltage is a key parameter to control the floating gate sensor, with the sensitivity of the device dependant on it, i.e., it is very …
-
Electrochemical Sensor for Metal Ions and Phosphate Ion Detection for Biomedical and Agriculture Application
… which indicates good selectivity of the GO/AgNWs sensing electrode. In this experiment, the sensitivities of the GO/AgNW working electrode sensors are found to be 7.89 μA/μM, 4.21 μA/μM, 2.63 μA/μM for Cd2+, Hg2+, Pb2+ respectively. The detection ranges of these sensors are very broad at 5μM - 10 …
Page 1 of 2