Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Sensor-based Monitoring"”.

  1. Dynamic PVDF sensor based monitoring of single point cutting processes

    … has been designed, fabricated, and evaluated for monitoring the dynamic cutting forces and torque in single-point cutting processes, specifically turning and boring. Physics-based models are used to relate the measured voltage to the process forces and torques. By means of key assumptions about …

    gatech Repository record for Dynamic PVDF sensor based monitoring of single point cutting processes (opens in a new tab)

  2. Computational Methods for Particle Reactivity and Sensor-Based Monitoring in Enhanced Rock Weathering

    … in particle reactivity and the field-scale monitoring. This thesis introduces a dual computational framework addressing these gaps. First, an image-based pipeline that quantifies mineral reactivity through high-resolution EPMA analysis, defining the exposed reactive perimeter ratio (ERPR) …

    guelph Repository record for Computational Methods for Particle Reactivity and Sensor-Based Monitoring in Enhanced Rock Weathering (opens in a new tab)

  3. Sensor-based monitoring for enhancing patient care in a developing country in South-East Europe

    … developing countries. The continuous and remote monitoring of chronic parameters is considered to improve patient care and provide information for the early diagnosis, treatment, and management of these long-term conditions. In this regard, this research investigated the adoption and acceptance …

    whiterose Download PDF for Sensor-based monitoring for enhancing patient care in a developing country in South-East Europe (opens in a new tab)

  4. Wear detection by multi-modal sensing: integrating tribological understanding and sensor-based monitoring of pitting and wear

    … Despite the widespread adoption of vibration-based condition monitoring, a gap persists between the mechanism understanding of surface damage and the sensing technologies available to detect it in service. This commentary presents a project addressing this gap through experimental …

    soton Repository record for Wear detection by multi-modal sensing: integrating tribological understanding and sensor-based monitoring of pitting and wear (opens in a new tab) Download PDF for Wear detection by multi-modal sensing: integrating tribological understanding and sensor-based monitoring of pitting and wear (opens in a new tab)

  5. Geochemical and sensor-based monitoring of fault-associated carbonic springs in Grand Canyon and northern New Mexico: identifying Hydrologic Pathways and establishing baselines

    … and mixing of different waters, and continuous monitoring sensors are used to examine the physical hydrology and investigate changes in spring parameters over time. This work is split into three chapters. Chapter 1 uses geochemistry to investigate the source and evolution of water for a series …

    unm Repository record for Geochemical and sensor-based monitoring of fault-associated carbonic springs in Grand Canyon and northern New Mexico: identifying Hydrologic Pathways and establishing baselines (opens in a new tab)

  6. BLDC motor modeling for a smart tool

    … The findings support the integration of sensor-based monitoring and adaptive control in smart tools, paving the way for enhanced usability, extended tool life, and reduced skill barriers in industrial applications.

    texas Repository record for BLDC motor modeling for a smart tool (opens in a new tab)

  7. Automotive Light Assembly Failure detection

    … An adaptable, reliable and low cost real time monitoring and diagnostic system that would interrupt the testing operation at the first onset of a failure is desired. This thesis describes accelerometer based, microphone (single and dualmicrophone) based and acoustic emission sensor based …

    queens Repository record for Automotive Light Assembly Failure detection (opens in a new tab)

  8. Sensor-based Online Process Monitoring in Advanced Manufacturing

    … testing. Therefore, it is desirable to employ sensors for in-process monitoring, allowing for real-time quality assurance. Chapter 3 describes the application of sensor based monitoring to additive manufacturing, in which sensors are attached to a desktop model fused deposition modeling …

    vt Repository record for Sensor-based Online Process Monitoring in Advanced Manufacturing (opens in a new tab)

  9. Estimation of Ocean Waves and Failure Detection of Ocean Systems Using Data-Driven Methods: Kalman Filtering and Neural Networks

    … detection of structural failures. Traditional monitoring approaches rely on external devices such as wave buoys, subsea sensors, or radars, which are expensive, maintenance-intensive, and difficult to deploy at scale. This dissertation develops data-driven methods that utilize onboard motion …

    tamu Repository record for Estimation of Ocean Waves and Failure Detection of Ocean Systems Using Data-Driven Methods: Kalman Filtering and Neural Networks (opens in a new tab)

  10. Estimation of Ocean Waves and Failure Detection of Ocean Systems Using Data-Driven Methods: Kalman Filtering and Neural Networks

    … detection of structural failures. Traditional monitoring approaches rely on external devices such as wave buoys, subsea sensors, or radars, which are expensive, maintenance-intensive, and difficult to deploy at scale. This dissertation develops data-driven methods that utilize onboard motion …

    tamu Repository record for Estimation of Ocean Waves and Failure Detection of Ocean Systems Using Data-Driven Methods: Kalman Filtering and Neural Networks (opens in a new tab)

  11. The development of a robotic urban search and rescue system : a thesis presented in partial fulfilment of the requirements for the degree of Masters of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand

    … survivors using small form factors and varied sensors to rapidly and reliably detect people. The tasks are not limited to searching for survivors, as with different sensors the robots will be able to detect unseen hazards, such as gas leaks, and inform rescuers of potential dangers as they …

    massey Repository record for The development of a robotic urban search and rescue system : a thesis presented in partial fulfilment of the requirements for the degree of Masters of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand (opens in a new tab)

  12. Digital Twins for Accelerated Qualification in Additive Manufacturing

    … twin framework is that combining rapid physics-based computational modeling, in-situ sensor-based monitoring, and machine learning enables accurate prediction and control of the solidified microstructure and part properties. The hierarchical digital twin framework is stratified into the …

    vt Repository record for Digital Twins for Accelerated Qualification in Additive Manufacturing (opens in a new tab)

  13. Roadway Runoff Impacts to Trout Streams Studies for MS4 Permit

    … Storm Sewer System (MS4) permit framework. Field monitoring was conducted from April 2024 through October 2025 across two consecutive summer seasons using a tiered, multi-instrument approach: YSI ProDSS handheld grab sampling provided regulatory-grade reference measurements; HOBO MX-801 optical DO …

    gsu Repository record for Roadway Runoff Impacts to Trout Streams Studies for MS4 Permit (opens in a new tab)

  14. Processing and learning of cardiac signals: Application to heart failure

    … Rehospitalizations can be reduced by remote sensor-based monitoring of HF patients. The motivation for this work is the possibility of large-scale remote monitoring via non-invasive and unobtrusive devices that can measure cardiac function. Two cardiac signals acquired from such devices are …

    gatech Repository record for Processing and learning of cardiac signals: Application to heart failure (opens in a new tab)

  15. Modeling pathways toward sustainable crop production in controlled environment agriculture

    … such as growth and evapotranspiration rates. A sensor-based monitoring system was developed and tested in experimental trials to capture accurate and frequent growth and water use data for two different lettuce cultivars. The results underscore the necessity of cultivar-specific parameterization …

    cornell Repository record for Modeling pathways toward sustainable crop production in controlled environment agriculture (opens in a new tab)

  16. Process monitoring and feedback control using multiresolution analysis and machine learning

    Online process monitoring and feedback control are two widely researched aspects that can impact the performance of a myriad of process applications. Semiconductor manufacturing is one such application that due to the ever increasing demands placed on its quality and speed holds tremendous …

    usf Repository record for Process monitoring and feedback control using multiresolution analysis and machine learning (opens in a new tab)

  17. Bridge to digital converters for environmental monitoring in edge IoT devices

    Continuous air monitoring is crucial for maintaining safe and comfortable home and work environments, particularly in industries that handle flammable or toxic gases, which pose serious health risks. Consequently, there is an increasing focus on developing wearable gas sensors to protect workers in …

    cork Repository record for Bridge to digital converters for environmental monitoring in edge IoT devices (opens in a new tab)

  18. Vibration Based Monitoring and Damage Detection of Structures using Wireless Sensors

    Structural Health Monitoring (SHM) implies monitoring the performance of structures using sensors to get an advance warning of the loss of structural capacity or potential collapse. Wireless-sensor based monitoring system is found to be advantageous over traditional wire-based system because of …

    concordia Download PDF for Vibration Based Monitoring and Damage Detection of Structures using Wireless Sensors (opens in a new tab)

  19. Machine Learning in Solar Photovoltaics Systems

    … i-v curve characterization, agrivoltaic sensor-based monitoring, and arc-fault detection. A major component of this dissertation is the development of an automated fault detection framework for PV modules using IR imaging. Reinforcement learning and convolutional autoencoders process a …

    tamu Repository record for Machine Learning in Solar Photovoltaics Systems (opens in a new tab) Embargoed until 2027-05-01

Page 1 of 2