Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 55 for “"Sentaurus"”.
-
Design and Optimization of Superjunction Vertical DMOS Power Transistors using Sentaurus Device Simulation
… simulation. All relevant physical models in Sentaurus are turned on. The VDMOS device doping profile is obtained from process simulation. The superjunction VDMOS performance in off-state breakdown voltage and specific on-resistance is compared with that in conventional VDMOS structure. In …
-
Mixed-mode Circuit and Device Simulations of IGBT with Gate Unit Using Synopsys Sentaurus Device
… can be shortened by the use of simulation tools. Sentaurus Device combines a good numerical model of power electronics devices and complex external circuits. It’s capable to simulate the IGBT switching behaviours applying different gate unit settings in HVDC Light™. The numerical model of the IGBT …
-
Προσομοίωση συν- διάχυσης Φωσφόρου και Βορίου σε υπόστρωμα Γερμανίου με χρήση του λογισμικού προσομοίωσης Sentaurus. Παρουσίαση και ανάλυση των αποτελεσμάτων
… τους με χρήση του λογισμικού προσομοίωσης Sentaurus, η επεξήγησή τους και τέλος η εξαγωγή συμπερασμάτων, στοχεύοντας στην κατανόηση των μηχανισμών της διάχυσης κάθε πρόσμιξης. Αρχικά γίνεται μελέτη των μηχανισμών διάχυσης σε ημιαγωγούς. Στην συνέχεια παρουσιάζονται τα αποτελέσματα των …
-
Exploration of 3D Nanoscale Image Sensor to Enable Logic and Sensing in Single Chip
… Image sensor has been performed in TCAD Synopsys Sentaurus tools. Using the Raytracing optical physics model, the optical response of the Nanowire Image sensor is simulated and photo-current response is observed. The measured optical generation and efficiency have been compared with PN Junction …
-
Simulace elektrických parametrů na waferu z karbidu křemíku (SiC)
… na simulaci iontové implantace v programu Sentaurus Process, kde byla pomocí úpravy empirických parametrů provedena kalibrace na základě profilů získaných metodou hmotnostní spektrometrie sekundárních iontů (SIMS). Byly porovnány dva přístupy kalibrace a podařilo se výrazně zpřesnit …
-
Investigation And Trade Study On Hot Carrier Reliability Of The Phemt For Dc And Rf Performance
… Transistor (PHEMT) is carried out through Sentaurus Device Simulation, measurement, and physical analyses. A trade study of devices with four various geometries are evaluated for DC and RF performance. The trade-off of DC I-V characteristics, transconductance, and RF parameters versus hot …
-
Design and Study of Through Silicon Thermal Via (TSTV) for WBG Devices Using Custom Integration of TCAD and 3D Modelling CAD Tools
… error free. TCAD software packages like Synopsys Sentaurus offers 2D and 3D device design and simulation capability, however, it misses on ease of 3D design, parametric geometry, ease of resolving numerical errors in the 3d geometry and error-free meshing of the overall geometry. In order to …
-
Geant4 simulation of radiation effect on semiconductor materials and hetero-junction field-effect transistor (HFET)
… the Geant4 Monte Carlo toolkit with TCAD Sentaurus to accurately model the energy deposition process and its subsequent impact on device operation. The methodology begins with Geant4 simulations of ion-matter interactions, confirming that stopping power increases with both the atomic …
-
LDMOS Power Transistor Design and Evaluation using 2D and 3D Device Simulation
… are investigated in this thesis using Sentaurus TCAD simulation software. Optimizations to the SJ LDMOS were attempted such as adding a buffer layer to the device, but simulation and theoretical evidence point out that the benefits of the SJ technique are marginal at the 30 V …
-
COMBINED PROCESS AND DEVICE SIMULATIONS TO SUPPORT BBR3 TUBE FURNACE DIFFUSION PROCESS OPTIMIZATION FOR INDUSTRIAL HIGH-EFFIICENCY N-TYPE CRYSTALLINE SILICON SOLAR CELLS
… cells. Five main topics are investigated: a. A Sentaurus TCAD process simulation program is developed and calibrated by experiments. b. The passivation of heavily diffused p+ silicon surfaces is characterized. c. A systematic method to quantify the metallization-induced recombination losses on …
-
Minimizing nMOS Edge Leakage in Fully Depleted Silicon-on-Insulator CMOS Using Poly-Buffered LOCOS Isolation
… thickness creates parasitic edge transistors. Sentaurus simulations imply that if not for this field oxide loss, the fabricated nMOS devices would have had minimal leakage with no kink in the subthreshold curve.
-
Fabrication and modeling of high efficiency and stabilized P-type passivated emitter rear silicon solar cells (PERC)
… PERC cell efficiency roadmap is established by Sentaurus 2D device modeling. In the second part, indium doped PERC solar cells are fabricated to eliminate light-induced degradation, since the source of degradation is boron-oxygen complexes in the boron doped p-type wafer. Also, a regeneration …
-
Simulation of SiC MESFET for high frequency power application
… calculations and TCAD simulations (Synopsys Sentaurus). First, the dependence on transistor parameters as gate length, channel thickness on fT, fMAX, gm and MAG have been studied using analytic expressions. TCAD simulations using a calibrated simulator were then used to propose different …
-
Research and development of high voltage SiC bipolar junction transistor
… which was verified both by hand calculation and Sentaurus TCAD simulation. With a four step Junction Termination Extension (JTE) structure with total width longer than 40μm, the BJT simulated and measured collector-base breakdown voltage and collector-emitter breakdown voltage were both higher …
-
Sb-Heterostructure Backward Diode for Millimetre-Wave Detection
… work. This is done by using Synopsys' TCAD Sentaurus software. As the second part of this thesis, MBE growth of Sb-HBDs has been conducted to investigate the effect of various buffer thicknesses and the tunnelling interface (InAs/AlSb) bonding types.Large scale test diodes were fabricated …
-
Novel dual-threshold voltage FinFETs for circuit design and optimization
… FinFETs are simulated and validated using Sentaurus TCAD simulations. Dual-14, FinFETs with independent gates enable series and parallel merge transformations in logic gates, realizing compact low power alternative gates with competitive performance and reduced input capacitance in …
-
Optimization of the design of experimental (DoE) simulations of Ion-sensitive Field Effect Transistors
… this is performed by using MATLAB and Synopsys Sentaurus TCAD software. A study of different types of models for the bio-interface along with an analysis of output characteristics obtained from simulation is presented in this report.
-
Characterization and Numerical simulation of Gallium Nitride-based Metal-oxide-semiconductor High Electron Mobility Transistor with High-K Gate Stack
… these simulations are presented in this thesis. Sentaurus TCAD simulation suite was used for the device simulations. The simulation physics and models were discussed before some preliminary simulation results were presented. The simulation results presented was generally in line with the device …
-
A Physics-Based Analytical Compact Model, TCAD Simulation, and Empirical SPICE Models of GaN Devices for Power Applications
… GIT device is investigated via a TCAD Sentaurus simulation to understand the effects of various parameters unique to the GIT. Based on the TCAD simulation and model, an analytical compact model can be developed for a quick and more intuitive understanding of the GIT behavior. Finally, …
-
Simulation of total ionizing dose and random dopant fluctuations in sub-100 nm transistor nodes
… isolation oxides using the simulation software Sentaurus device. The method is based on solving transport equations for carriers in the oxide. Aspects of simulation of interface trap formation through de-passivation from ionic hydrogen are discussed. This includes transport of hydrogen species …
Page 1 of 3