Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Sentaurus TCAD"”.

  1. LDMOS Power Transistor Design and Evaluation using 2D and 3D Device Simulation

    … are investigated in this thesis using Sentaurus TCAD simulation software. Optimizations to the SJ LDMOS were attempted such as adding a buffer layer to the device, but simulation and theoretical evidence point out that the benefits of the SJ technique are marginal at the 30 V …

    ucf Repository record for LDMOS Power Transistor Design and Evaluation using 2D and 3D Device Simulation (opens in a new tab)

  2. Research and development of high voltage SiC bipolar junction transistor

    … which was verified both by hand calculation and Sentaurus TCAD simulation. With a four step Junction Termination Extension (JTE) structure with total width longer than 40μm, the BJT simulated and measured collector-base breakdown voltage and collector-emitter breakdown voltage were both higher …

    texas Repository record for Research and development of high voltage SiC bipolar junction transistor (opens in a new tab)

  3. Novel dual-threshold voltage FinFETs for circuit design and optimization

    … FinFETs are simulated and validated using Sentaurus TCAD simulations. Dual-14, FinFETs with independent gates enable series and parallel merge transformations in logic gates, realizing compact low power alternative gates with competitive performance and reduced input capacitance in …

    rice Repository record for Novel dual-threshold voltage FinFETs for circuit design and optimization (opens in a new tab)

  4. Optimization of the design of experimental (DoE) simulations of Ion-sensitive Field Effect Transistors

    … this is performed by using MATLAB and Synopsys Sentaurus TCAD software. A study of different types of models for the bio-interface along with an analysis of output characteristics obtained from simulation is presented in this report.

    glasgow Repository record for Optimization of the design of experimental (DoE) simulations of Ion-sensitive Field Effect Transistors (opens in a new tab) Download PDF for Optimization of the design of experimental (DoE) simulations of Ion-sensitive Field Effect Transistors (opens in a new tab)

  5. Advanced Electron-Beam Techniques for Solar Cell Characterization

    … profile for accurate modelling of EBIC using Sentaurus TCAD. These simulation results were then verified using experimental data that were almost perfectly matching, clearly demonstrating the capability and benefit of the high resolution and accuracy of quantitative EBIC for the extraction of …

    nus Repository record for Advanced Electron-Beam Techniques for Solar Cell Characterization (opens in a new tab) Download file for Advanced Electron-Beam Techniques for Solar Cell Characterization (opens in a new tab)

  6. Design and Study of Through Silicon Thermal Via (TSTV) for WBG Devices Using Custom Integration of TCAD and 3D Modelling CAD Tools

    … itself, 3D technology computer aided design (TCAD) and multi-physics simulation software tools are a must. Conventionally, TCAD and simulation software tools like SILVACO TCAD, require the device engineers to simplify the actual 3D device design into its 2D slice, consisting of only sharp …

    buffalo Repository record for Design and Study of Through Silicon Thermal Via (TSTV) for WBG Devices Using Custom Integration of TCAD and 3D Modelling CAD Tools (opens in a new tab)

  7. Silicon-based ultrathin layers for hole-selective contacts in silicon solar cells

    … prospects of a poly-Si/SiN/Si heterocontact via Sentaurus TCAD, with direct comparisons of carrier tunnelling probability and tunnelling current in a tunnelling oxide passivating contact counterpart. For SiN and SiO2 films of equivalent thickness, hole current densities are predicted to be at …

    soton Download PDF for Silicon-based ultrathin layers for hole-selective contacts in silicon solar cells (opens in a new tab)

  8. Device Layout Techniques for RF Performance Enhancement on SiGe HBTs for Future Generation BiCMOS Technology

    … degradation by 30% and 100%, respectively. Sentaurus TCAD was used to explain how reduced self-heating contributes more strongly to the Auger generation rate than the stress-induced bandgap modulation, thereby improving reliability. This work has been accepted for publication and presented …

    gatech Repository record for Device Layout Techniques for RF Performance Enhancement on SiGe HBTs for Future Generation BiCMOS Technology (opens in a new tab)

  9. Modeling radiovoltaic devices: A coupled Geant4-TCAD simulation workflow

    … Carlo radiation transport code, to Synopsys Sentaurus TCAD device simulation, converting Geant4’s depth-resolved energy deposition profile into a carrier generation rate imported through TCAD’s Optical Generation module. The workflow is applied to three candidate device stacks an amorphous …

    hawaii Repository record for Modeling radiovoltaic devices: A coupled Geant4-TCAD simulation workflow (opens in a new tab) Embargoed until 2027-04-07

  10. Numerical and Statistical Performance Analysis of Multi-Gate Negative Capacitance Field-Effect Transistors

    … performance. Computer simulations in Synopsys Sentaurus TCAD are used to simulate the device operation of NCFETs and study the use of FE material layers in the gate stack of multi-gate FETs. The body of this thesis is composed of two works of original research. The first studies the effect of a …

    waterloo Repository record for Numerical and Statistical Performance Analysis of Multi-Gate Negative Capacitance Field-Effect Transistors (opens in a new tab)

  11. Gate-Oxide-Short Defect Analysis and Fault Modeling Based on FinFET's 3D Structure

    … device is captured through simulations in Sentaurus TCAD environment that lead to the generation of more accurate defect models. These defect models are used in circuit-level simulations to generate appropriate fault models for the circuit structures. These cell-aware models could be …

    carleton Repository record for Gate-Oxide-Short Defect Analysis and Fault Modeling Based on FinFET's 3D Structure (opens in a new tab)

  12. Reliability Investigations of MOSFETs using RF Small Signal Characterization

    … through transient physics-based simulations in Sentaurus TCAD.

    qucosa-diss

  13. On-chip Electro-static Discharge (esd) Protection For Radio-frequency Integrated Circuits

    … thermal failure under ESD stress using TLP-like Sentaurus TCAD simulation. The snapback is caused by virtual bipolar transistor due to large electron-hole pairs impacted near drain region. Postsnapback saturation is caused by temperature-induced mobility degradation due to IIIV compound …

    ucf Repository record for On-chip Electro-static Discharge (esd) Protection For Radio-frequency Integrated Circuits (opens in a new tab)

  14. Physical simulation of GaN based HEMT

    … (HEMT) using commercial software (Synopsys, Sentaurus TCAD). The model is calibrated against measurement data. The results show a close matching with measured data, although some discrepancies have been found in the linear region of DC operation and high frequency regime of AC analysis. It is …

    chalmers Repository record for Physical simulation of GaN based HEMT (opens in a new tab)

  15. Exploiting ion-charged dielectrics for high efficiency solar cell architectures

    … in the literature. A model was developed in Sentaurus TCAD to study the formation and properties of field-induced layers. The simulation results suggested that the Rsh is determined by charge density, band-tail interface state density, and illumination. With optimised charge density and …

    oxford Repository record for Exploiting ion-charged dielectrics for high efficiency solar cell architectures (opens in a new tab)

  16. Exploiting extrinsic passivation on thin film dielectrics for high efficiency solar cells

    … efficiency solar cells is demonstrated through Sentaurus TCAD modelling of PERC, IBC, TOPCon cell architectures. It is shown that by optimising the charge concentration within the dielectric, the recombination activity at defect-heavy interfaces can be successfully mitigated by field effect …

    oxford Repository record for Exploiting extrinsic passivation on thin film dielectrics for high efficiency solar cells (opens in a new tab)

  17. Simulation, fabrication and characterisation of III-V photodetectors

    … project began with device simulations using the Sentaurus TCAD software, with which a comprehensive study of III-V materials was conducted. The heterostructure (n-InP/i-InGaAs/p-InP) emerged as the most suitable material combination for photodetectors' optical performance optimisation, …

    glasgow Repository record for Simulation, fabrication and characterisation of III-V photodetectors (opens in a new tab) Download PDF for Simulation, fabrication and characterisation of III-V photodetectors (opens in a new tab)

  18. Numerical simulation of perovskite/perovskite/silicon triple-junction solar cells

    … perovskite/silicon dual-junction model. A Sentaurus TCAD<br>model is used to identify dominant loss mechanisms that limit efficiency and to<br>quantify which targeted improvements yield the largest, most practical gains.<br>Coupling detailed optical modeling with drift-diffusion device …

    freiburg-diss Repository record for Numerical simulation of perovskite/perovskite/silicon triple-junction solar cells (opens in a new tab)

Page 1 of 2