Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"Serpentine Inlet"”.

  1. Flow control optimization in a jet engine serpentine inlet duct

    … investigations were carried out on an advanced serpentine jet engine inlet duct to understand the development and propagation of secondary flow structures. Computational analysis which went in tandem with experimental investigation was required to aid secondary flow control required for enhanced …

    tamu Repository record for Flow control optimization in a jet engine serpentine inlet duct (opens in a new tab)

  2. Non-Intrusive Sensing and Feedback Control of Serpentine Inlet Flow Distortion

    … total pressure distortion intensity found in serpentine inlet airflow was established using wall-pressure fluctuation measurements. This sensing technique was experimentally developed for aircraft with serpentine inlets in a symmetric, level flight condition. The turbulence carried by the …

    vt Repository record for Non-Intrusive Sensing and Feedback Control of Serpentine Inlet Flow Distortion (opens in a new tab)

  3. Boundary Layer Control and Wall-Pressure Fluctuations in a Serpentine Inlet

    … and engine stability were examined in a compact, serpentine inlet exhibiting flow separation. A 1/14-scale turbofan engine simulator provided the flow through the inlet. The inlet's mass flow was measured to be 759 scfm (0.939 lbm/s) with an average throat Mach number of 0.23 when the simulator …

    vt Repository record for Boundary Layer Control and Wall-Pressure Fluctuations in a Serpentine Inlet (opens in a new tab)

  4. Structural Design of a Morphing Serpentine Inlet Using a Multi-Material Topology Optimization Methodology

    … engine efficiency, but necessitate the use of a serpentine engine inlet duct (S-duct) to provide the propulsion system with air. The optimal shape of an aircraft S-duct varies with flight condition, incentivizing the use of morphing systems to vary inlet parameters during flight; allowing for …

    queens Repository record for Structural Design of a Morphing Serpentine Inlet Using a Multi-Material Topology Optimization Methodology (opens in a new tab)

  5. Effectiveness of a Serpentine Inlet Duct Flow Control Scheme at Design and Off-Design Simulated Flight Conditions

    … test facility to determine the flow quality of a serpentine inlet duct incorporating active flow control for several simulated flight conditions. The total pressure distortion at the aerodynamic interface plane (AIP) was then used to predict the resulting stability for a compression system. This …

    vt Repository record for Effectiveness of a Serpentine Inlet Duct Flow Control Scheme at Design and Off-Design Simulated Flight Conditions (opens in a new tab)

  6. Measurements of Flow in Boundary Layer Ingesting Serpentine Inlets

    … which require boundary layer ingesting (BLI) serpentine inlets to provide the needed air ow to the engine. These inlets produce distorted flow profiles that can cause aeromechanical, stability, and performance changes in embedded engines. Proper design of embedded engine systems requires …

    vt Repository record for Measurements of Flow in Boundary Layer Ingesting Serpentine Inlets (opens in a new tab)

  7. Assessment of an Innovative Experimental Facility for Testing Diffusing Serpentine Inlets with Large Amounts of Boundary Layer Ingestion

    … developed for testing flush-mounted, diffusing serpentine inlets intended for use on blended-wing-body aircraft. The static ground test facility was able to simulate the boundary layer profile expected to be ingested by inlets mounted on the aft sections of these aircraft. It generated Mach …

    vt Repository record for Assessment of an Innovative Experimental Facility for Testing Diffusing Serpentine Inlets with Large Amounts of Boundary Layer Ingestion (opens in a new tab)

  8. Unsteady separation point injection for pressure recovery improvement in high subsonic diffusers

    Serpentine inlet ducts on modem tactical aircraft distort the inlet flow and decrease pressure recovery at the aerodynamic interface plane (AIP). Current inlet designs are more aggressive, increasing distortion and decreasing pressure recovery at the AIP. Often the flow separates from the wall of …

    nps Repository record for Unsteady separation point injection for pressure recovery improvement in high subsonic diffusers (opens in a new tab)

  9. Full Scale Experimental Transonic Fan Interaction with a Boundary Layer Ingesting Total Pressure Distortion

    … engine through boundary layer ingesting (BLI) inlets, creating a different operational environment from which the engines were originally designed. The goal of this study was to explore the effects such non-uniform flow would have on the behavior and performance of a transonic fan in a full …

    vt Repository record for Full Scale Experimental Transonic Fan Interaction with a Boundary Layer Ingesting Total Pressure Distortion (opens in a new tab)

  10. Measurement and Uncertainty Analysis of Transonic Fan Response to Total Pressure Inlet Distortion

    … experimental study of transonic fan response to inlet total pressure distortion. A Pratt and Whitney JT15D-1 turbofan engine was subjected to a total pressure distortion representative of a boundary layer ingesting serpentine inlet. A 5-hole probe measured the aerodynamic response of the fan …

    vt Repository record for Measurement and Uncertainty Analysis of Transonic Fan Response to Total Pressure Inlet Distortion (opens in a new tab)

  11. Effect of BLI-Type Inlet Distortion on Turbofan Engine Performance

    … the low velocity boundary layer flow through a serpentine inlet into a turbofan engine adversely affects the performance of the engine. The available literature has only yielded studies of the effects of this specific type of inlet distortion on engine performance in the form of numerical …

    vt Repository record for Effect of BLI-Type Inlet Distortion on Turbofan Engine Performance (opens in a new tab)