Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Setting reaction"”.
-
Analysis of MTA's Setting Reaction: A Differential Scanning Calorimetry Study
… to yield enthalpy to serve as an indicator of reaction products formed over time. The results showed water, calcium silicate hydrate, gypsum, and calcium hydroxide endothermic peaks in the thermograms obtained from the DSC analysis of MTA at various time intervals. Peaks at 90-110°C, 110-130°C, …
-
Effect of cation substitutions in an ionomer glass composition on the setting reaction and properties of the resulting glass ionomer cements
… )O\(_3\)-1.5P\(_2\)O\(_5\)-3CaO-2CaF\(_2\) on the setting reaction and properties of the resulting glass ionomer cements (GICs). Experimental GICs (Ca-GIC, Ca-Sr-GIC and Ca-Ba-GIC) were characterized via various techniques: Diametral tensile strength, compressive strength, flexural strength, …
-
Μελέτη του μηχανισμού πήξης και μεταβολής διαστάσεων αντιπροσωπευτικών τύπων φυραμάτων ενδοδοντίας
… in a semi-fluid condition and set gradually. Setting time of root canal sealers is among the physical properties required by the ISO and ΑNSI/ADA specifications. A number of studies have investigated the setting time of endodontic sealers under a variety of in vitro conditions. In most in …
-
Direct contact measurement of the dielectric properties of glass ionomer cements for MEMs design
… properties of glass ionomer cements during their setting reaction in order to observe if there is a correlation between these properties and the cement curing. Commercial glass ionomer cements were prepared and their setting process was monitored over a 24 hour period using FT-IR and direct …
-
Development of a Portland cement based system for vertebroplasty
… improved cement injectability, decreased setting times from over 2 h to below 20 minutes while maintaining the compressive strength of the material. Cement characterisation methods including X-ray diffraction (XRD), helium pycnometry and zeta potential measurements were employed to …
-
Polymerisation kinetics and optical phenomena of photoactive dental resins
… Consequently a better understanding of the setting reaction, optical properties and physical properties will aid material development.
-
Strengthening dental amalgams
… greatly to the understanding of the amalgam setting reaction and testing methods. In the last four decades various investigators have done much to further improve the amalgam alloy and refine the techniques of manipulation. These studies have not only described the factors related to the …
-
Enhancing the Strength of Conventional Glass Ionomer Cements Using Nanomaterials
… vulnerable to the low pH that occurs during the setting reaction of the GIC and may have been dissolved, destroying their fibrous morphology. HNTs were more acid resistant but exhibited large amounts of agglomeration and thus required milling to disperse them throughout the GIC. Substituting 5% …
-
An in-vitro comparison of bacterial microleakage of zinc-oxide eugenol and brasseler biceramic seale
… with dentin or gutta-percha is expected from the setting reaction of calcium hydroxide based sealers and the epoxy-based sealers. The setting reaction of the zinc oxide-eugenol mixtures is a chelation reaction occurring with the zinc ion of the zinc oxide. Development and maintenance of the seal …
-
Optimising calcium phosphate cement formulations to widen clinical applications
… of CPC’s: (1) limiting the liquid phase in the setting reaction of a brushite cement to produce monetite (dehydrated brushite) based cement, with increased solubility to overcome the problems faced by long term stability of hydroxyapatite (HA) cements; (2) manipulating the cement formulation to …
-
An X-Ray Diffraction Study of Silver-Tin Amalgams
… have been undertaken to determine the setting mechanism of the dental amalgam with the hope of explaining the existing data on the amalgam properties. Such investigations have utilized either micrographic or x-ray (Debye-Scherrer) analysis. By their nature neither method has been …
-
Use of a Portland Cement Accelerator with Mineral Trioxide Aggregate
… for placement of a restoration to allow for setting. If the time to set of MTA can be accelerated to a single appointment time frame without significantly altering its properties, then MTA may gain even wider acceptance. The purpose of this study is to identify the percentage of a Portland …
-
Development of Glass Ionomer Cements with Improved Mechanical and Remineralizing Properties by Incorporation of 45S5 Bioglass®-Ceramic
… agents. The early stage progression of setting reaction was monitored. Bimodal particle size distribution was shown to improve the packing density and integrity of the set cement. In such GICs, not only the neurotoxicity of Al is eliminated, but chemical bond formation at cement/hard …
-
Light-Activation Influence on the Thermal Analysis of a Resin-Modified Glass-Ionomer
The acid-base and light polymerization reactions in resin modified glass ionomers (RMGI) have been shown to compete and possibly inhibit one another during early RMGI development. Earlier beginning times of light polymerization initiation may limit the acid-base reaction and if time allowed for the …
-
Reinforced dental glass ionomer cements: from conventional to nanocomposites
… rheometre to establish the working and setting times of cements after the reinforcement with nanoclays. Additionally, the wear resistance of cements was also measured by two different wear-test methodologies namely, reciprocating wear test (ball-on-flat) and Oregon Health & Sciences …
-
Preparation and characterization of DCPD-forming calcium phosphate cements and of cement-protein drug microparticle composites for bone tissue engineering
… phosphate cements are known to have very short setting times. Chemical retardation of the setting reaction using different amounts of sodium citrate resulted in prolonged, now useful, working times but a pronounced loss in mechanical strength. The increment of the setting time and the decrement …
-
Investigation into the Effects of Filling Materials on the Dental Tissues
… phosphate cement is reviewed and the complex reaction which takes place when the powder and liquid of this cement are mixed is described. It is shown that phosphoric acid and primary acid phosphate are present when the cement is in the plastic state. The importance of variations in the …
-
Novel Bioactive Cements to Promote Bone Regeneration
… technology. These cements are based on the setting reaction between an aluminium containing fluorosilicate glass, poly (acrylic acid) (PAA) and a setting modifier. The glass powder is acid degradable, which crosslinks with the ionised acid, resulting in a matrix of polyacrylates salts with …
-
Sorelphasenbildung - Löslichkeitsgleichgewichte und Abbindereaktionen des MgO-Baustoffs
Der Magnesiabaustoff, dessen Bindemittelphasen basische Magnesiumsalz-Hydrate sind, wird aufgrund seiner Beständigkeit gegenüber salinaren Lösungszusammensetzungen zur Errichtung geotechnischer Barrieren im Salzgestein eingesetzt. Der Nachweis der Langzeitstabilität kann über das thermodynamische …
-
Novel application forms and setting mechanisms of mineral bone cements
… valuable synthetic bone grafts, as they are self-setting, biocompatible, osteoconductive and in their composition similar to the inorganic phase of human bone. Due to their long shelf-life, neutral setting and since water is sufficient for setting, hydroxyapatite (HA) forming cements are processed …
Page 1 of 2