Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 239 for “"Setting time"”.

  1. Setting time standards at NISTARS

    nps Repository record for Setting time standards at NISTARS (opens in a new tab)

  2. Setting Time Standards in a Service Environment: A Case Study

    … system that is capable of producing accurate time standards. Comparison of actual times reported by employees with these standards would then be used to produce accurate productivity measures. The proposed system is explained in detail, and the results obtained by implementing such a system …

    ucf Repository record for Setting Time Standards in a Service Environment: A Case Study (opens in a new tab)

  3. Electrical Resistivity and Temperature of Fresh Cement Paste as Indicators for Setting Time

    … as its compressive strength, penetrability, and setting. Among all, setting time is one of the important properties for the concrete industry, as it is the factor in determining the consolidation, finishing, and curing time of a concrete pour. Inadequate determination of concrete setting time …

    ottawa-retro Repository record for Electrical Resistivity and Temperature of Fresh Cement Paste as Indicators for Setting Time (opens in a new tab)

  4. Batch and Placement Size Effects on the Setting Time of BCSA Cement Concrete

    … which offers numerous benefits due to its rapid-setting behavior and sustainability properties. BCSA cement concrete has many potential applications, particularly for structural and transportation infrastructure repair. Due to the rapid-setting properties of BCSA cement, a comprehensive …

    arkansas Repository record for Batch and Placement Size Effects on the Setting Time of BCSA Cement Concrete (opens in a new tab)

  5. Effects of supplementary cementing materials on the setting time and early strength of concrete

    … materials (SCMs) frequently results in delayed setting and low early strength. When SCM containing concrete is placed during cold weather and/or contains certain chemical admixtures, these problems can intensify and can seriously impact the performance of a pavement. This project investigated …

    texas Repository record for Effects of supplementary cementing materials on the setting time and early strength of concrete (opens in a new tab) Restricted access

  6. Investigation of Setting Time and Compressive Strength of Ready-Mixed Concrete Blended with Returned Fresh Concrete

    … research will be performed in a laboratory where setting time and compressive strength will be tested for both the control and blends of varying proportion and age of plain or retarded RFC with subsequent fresh batches. This study will discover the C1798/C1798M-16 (Standard Procedure for reusing …

    unlv Repository record for Investigation of Setting Time and Compressive Strength of Ready-Mixed Concrete Blended with Returned Fresh Concrete (opens in a new tab) Download PDF for Investigation of Setting Time and Compressive Strength of Ready-Mixed Concrete Blended with Returned Fresh Concrete (opens in a new tab)

  7. Effect of Citric Acid on Slump, Compressive Strength, and Setting Time of Belitic Calcium Sulfoaluminate Concrete

    … has well established advantages related to fast setting time, fast strength gain, long-term strengths, shrinkage, and sustainability. Due to its fast setting and hardening, this type of cement has historically been used to repair concrete structures, highways, and runways. This work provides much …

    arkansas Repository record for Effect of Citric Acid on Slump, Compressive Strength, and Setting Time of Belitic Calcium Sulfoaluminate Concrete (opens in a new tab)

  8. Liquid nitrogen for cooling concrete : safety precautions, methods of injection, and effects on setting time and drying shrinkage

    … were conducted to study the effects of LN on setting time, admixtures, and drying shrinkage. The results of these tests are reported in this thesis.

    texas Repository record for Liquid nitrogen for cooling concrete : safety precautions, methods of injection, and effects on setting time and drying shrinkage (opens in a new tab) Restricted access

  9. Effects of Sodium Chloride on the Rheological Properties, Setting Time, Self-desiccation and Strength of Cemented Paste Backfill

    … on the surface through pipes to the stopes, sometimes over several kilometers, and then placed in underground mining cavities (stopes) to support the ground or rock mass. Therefore, it must meet certain rheological, setting time, and strength gain performance requirements. Additionally, as many …

    ottawa-retro Repository record for Effects of Sodium Chloride on the Rheological Properties, Setting Time, Self-desiccation and Strength of Cemented Paste Backfill (opens in a new tab)

  10. Use Of Nano-Silica To Increase Early Strength And Reduce Setting Time Of Concretes With High Volumes Of Slag Or Fly Ash

    … ash concretes can develop good strengths over time if properly cured, exceeding those of similar concretes without slag or fly ash. However, early strengths of such concretes are often lower than Portland cement concrete without slag or fly ash which may affect construction progress. The …

    nus Repository record for Use Of Nano-Silica To Increase Early Strength And Reduce Setting Time Of Concretes With High Volumes Of Slag Or Fly Ash (opens in a new tab) Download file for Use Of Nano-Silica To Increase Early Strength And Reduce Setting Time Of Concretes With High Volumes Of Slag Or Fly Ash (opens in a new tab)

  11. Μελέτη του μηχανισμού πήξης και μεταβολής διαστάσεων αντιπροσωπευτικών τύπων φυραμάτων ενδοδοντίας

    … in a semi-fluid condition and set gradually. Setting time of root canal sealers is among the physical properties required by the ISO and ΑNSI/ADA specifications. A number of studies have investigated the setting time of endodontic sealers under a variety of in vitro conditions. In most in …

    greece Repository record for Μελέτη του μηχανισμού πήξης και μεταβολής διαστάσεων αντιπροσωπευτικών τύπων φυραμάτων ενδοδοντίας (opens in a new tab)

  12. In-vitro evaluation of dye leakage of an MTA apical barrier at varying setting times

    … 1 hour, 4 hours, 24 hours, and 1 week of setting time. One hundred twenty single-rooted extracted teeth were accessed and the apical three millimeters resected. The teeth were instrumented with 0.06 tapered Brasseler EndoSequence series rotary instruments to the apex. The same instrument …

    wvu Repository record for In-vitro evaluation of dye leakage of an MTA apical barrier at varying setting times (opens in a new tab)

  13. Physical and mechanical properties of experimental dentinogenic pulp capping material

    … To test the physical and mechanical properties (setting time, pH level, solubility, and compressive strength) of two groups of BIE-containing materials: 20% BIE (20% BIE, 60% Portland cement, and 20% bismuth oxide) and 40% BIE (40% BIE, 40% Portland cement, and 20% bismuth oxide), and compare …

    bu Repository record for Physical and mechanical properties of experimental dentinogenic pulp capping material (opens in a new tab)

  14. Designing High Performance Geopolymer Concrete Using Fly Ash and Slag

    … strength, acceptable workability, and suitable setting time. The compressive strength and setting time of fly ash-based geopolymer paste/mortar were studied by varying the components of the alkali solution, slag replacement content, curing temperature, and liquid to binder ratio (L/B). The …

    hawaii Repository record for Designing High Performance Geopolymer Concrete Using Fly Ash and Slag (opens in a new tab)

  15. Structural Investigation of Alkali-Activated Blast Furnace Slag

    … The materials were characterized in terms of setting time, chemical composition, reaction kinetics, microstructure and mechanical properties. The results showed that the water glass modulus significantly affected setting time, porosity, structural development, and compressive strength. Modulus …

    chalmers Repository record for Structural Investigation of Alkali-Activated Blast Furnace Slag (opens in a new tab)

  16. Warm vertical obturation with three different sealers, effects of technique on sealing ability and potential for retreatment

    … assess success in regaining patency, procedure time, possible filling material extrusion and post-retreatment sealer/gutta-percha residue. A setting time test and SEM/EDS analysis were conducted to assess the effect of heat application on physicochemical properties and microstructure of each …

    bu Repository record for Warm vertical obturation with three different sealers, effects of technique on sealing ability and potential for retreatment (opens in a new tab)

  17. ΣΥΜΒΟΛΗ ΣΤΗ ΜΕΛΕΤΗ ΤΗΣ ΕΛΑΣΤΙΚΗΣ ΣΥΜΠΕΡΙΦΟΡΑΣ ΤΩΝ ΕΛΑΣΤΟΜΕΡΩΝ ΑΠΟΤΥΠΩΤΙΚΩΝ ΥΛΙΚΩΝ ΠΟΛΥΒΙΝΥΛΣΙΛΟΞΑΝΗΣ

    … WERE TAKEN FOR EVERY MATERIAL SAMPLE STARTING AT SETTING TIME,AS FOLLOWS: THE FIRST ONE 10 MIN. LATER . THE SECOND ONE 24 HOURS LATER; THE THIRD ONE 48 HOURS AND THE FOURTH ONE 7 DAYS AFTER SETTING TIME.

    greece Repository record for ΣΥΜΒΟΛΗ ΣΤΗ ΜΕΛΕΤΗ ΤΗΣ ΕΛΑΣΤΙΚΗΣ ΣΥΜΠΕΡΙΦΟΡΑΣ ΤΩΝ ΕΛΑΣΤΟΜΕΡΩΝ ΑΠΟΤΥΠΩΤΙΚΩΝ ΥΛΙΚΩΝ ΠΟΛΥΒΙΝΥΛΣΙΛΟΞΑΝΗΣ (opens in a new tab)

  18. Use of Supplementary Cementitous Material in Concrete Effect on Fresh Concrete Properties

    … loss over 2 hours, bleeding, segregation, setting time, and hydration behavior. One-day strength was additionally determined replacing 20%, 40% and 60% of the cement. The standard test method was used such as mor tar flow test using Hagermann cone for workability, Ultrasonic testing for …

    chalmers Repository record for Use of Supplementary Cementitous Material in Concrete Effect on Fresh Concrete Properties (opens in a new tab)

Page 1 of 12