Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Shafting."”.

  1. Photoelastic calibration of torsion shafting.

    … for stress analysis applied tc transmission shafting. Experimental effort was directed to devise a unique photoelastic sleeve which, when bonded to the reflective surface of a shaft, would provide a direct indication of shaft torque. A suitable stress-optic material molded to a working shaft …

    nps Repository record for Photoelastic calibration of torsion shafting. (opens in a new tab)

  2. Cyclic stresses in marine propeller shafting

    This project constitutes an attempt to confirm the existence and determine the magnitude of cyclic bending stresses thought to be the cause of many of the tailshaft failures in the "Victory" type freighters. Tests with the stern third of a 1/22 scale model hull supported in a testing tank were …

    ubc Repository record for Cyclic stresses in marine propeller shafting (opens in a new tab) Download PDF for Cyclic stresses in marine propeller shafting (opens in a new tab)

  3. A study of fatigue stresses in marine propellor shafting

    This paper describes an investigation carried out to study the fatigue failures of a "keyed tapered-shaft assembly" as affected by the keyway. Two fatigue testing machines were built and used: one tested a keyed assembly in reversed bending, and the other tested a keyed assembly in reversed torsion …

    ubc Repository record for A study of fatigue stresses in marine propellor shafting (opens in a new tab) Download PDF for A study of fatigue stresses in marine propellor shafting (opens in a new tab)

  4. Torsional-axial coupling in the line shafting vibrations in merchant ocean going ships

    … to show how the design of the propulsion line shafting affects the coupling phenomenon between torsional and axial vibrations, and to correlate line shafting design with potential structural problems of the hull. The line shafting design is first addressed using conventional approach which …

    concordia Download PDF for Torsional-axial coupling in the line shafting vibrations in merchant ocean going ships (opens in a new tab)

  5. Discrepencies of Theory as Against Empirical Results of Critical Speeds of Circular Cross Sectioned Shafting

    The scope of this thesis included computations and tests showing the first critical speeds of two shafts each 5/8" dia x 38" long one of C.R.S. and one of hard drawn brass. The purpose was to find and tabulate the discrepancies between the computed values for the critical speeds and the empirical …

    sdstate Repository record for Discrepencies of Theory as Against Empirical Results of Critical Speeds of Circular Cross Sectioned Shafting (opens in a new tab)

  6. Performance parameter recognition and damage prevention in marine shafting systems utilizing machine learning & artificial intelligence algorithms

    … powertrain of ships relies crucially on the shafting system, a component subject to rigorous regulatory standards ensuring reliability and operability under adverse conditions throughout the vessel's life cycle. Unlike many shipboard systems, the shafting system's lack of redundancy options …

    greece Repository record for Performance parameter recognition and damage prevention in marine shafting systems utilizing machine learning & artificial intelligence algorithms (opens in a new tab)

  7. Optimum resonance changer for submerged vessel signature reduction.

    … vessels, to avoid detection. The propeller-shafting system represents one of the most critical areas which must be addressed in order to reduce the low frequency acoustic signature. The propeller-shafting system is primarily excited by axial oscillations at the propeller. The force …

    unsw Repository record for Optimum resonance changer for submerged vessel signature reduction. (opens in a new tab)

  8. Intelligent Control of Mechatronic Systems

    … where the focus is on the control of marine shafting systems. A case study on the application of intelligent control in marine shafting systems modeled as a chained multiple mass-spring system is presented.

    nus Repository record for Intelligent Control of Mechatronic Systems (opens in a new tab) Download file for Intelligent Control of Mechatronic Systems (opens in a new tab)

  9. Passive and active control of the sound radiated by a submerged vessel due to propeller forces

    … dynamic models of a submarine hull and propeller/shafting system are developed. To reduce the radiated sound fields, passive control is introduced using a hydraulic vibration attenuation device known as a resonance changer, which is implemented in the propeller/shafting system. Active control …

    unsw Repository record for Passive and active control of the sound radiated by a submerged vessel due to propeller forces (opens in a new tab)

  10. An analytical study and computer analysis of three-dimensional, steady-state vibration of multishaft geared-rotor systems

    … physical branching to accommodate multiple shafting and frequency branching to simultaneously accommodate multiple frequencies and their interdependence resulting from time-varying mesh stiffness. Areas of emphasis include development of a modified transfer matrix to handle multiple …

    vt Repository record for An analytical study and computer analysis of three-dimensional, steady-state vibration of multishaft geared-rotor systems (opens in a new tab)

  11. Structural and acoustic responses of a submerged hull

    … propeller that are transmitted via the propeller-shafting system, resulting in subsequent sound radiation. Structural forces arising from on-board machinery also excites the vessel and contributes to structure-borne sound. The aim of this thesis is to characterize the vibro-acoustic responses of a …

    unsw Repository record for Structural and acoustic responses of a submerged hull (opens in a new tab)

  12. Submarine Propulsion Shaft Line: Probabilistic Prediction and Extension through Prevention of Water Ingress

    … interval is unprecedented, as no known submarine shafting system is currently operated with this inspection cycle, nor are any known commercial vessel shafts. Experience and improved design have eliminated many threats to the life of a submarine shaft, but inspections of existing shafts show a …

    nps Repository record for Submarine Propulsion Shaft Line: Probabilistic Prediction and Extension through Prevention of Water Ingress (opens in a new tab)

  13. An investigation of a proposed plan for conversion of liberty ships

    … to 85 RPM of propeller; use new line and tail shafting, new stern tube, and new 18' propeller; necessary auxiliaries duplicated using those from scrapped ship. The new bow is faired into existing Station No. 3 at approximately frame 30 and has the following characteristics: Cut -up starting at …

    nps Repository record for An investigation of a proposed plan for conversion of liberty ships (opens in a new tab)

  14. A survey of cylindrical bearing practice of the United States

    … cars and engines, heavy duty equipment, line shafting, gyroscopes, ships and steam engines. (d) The basic theory of the perfectly lubricated journal bearing is understood, but exact mathematical solution of the phenomena occurring within the bearing is as yet impossible. (e) By coordinating …

    vt Repository record for A survey of cylindrical bearing practice of the United States (opens in a new tab)

  15. Drive System Design Methodology for a Single Main Rotor Helicopter

    … weight estimation and efficiency, gearing, shafting, and cooling. Within the same architecture, the designer may add similar tools to model subcomponents such as support bearings, gearbox housing, freewheeling units, and rotor brakes. Measuring the relationships between key design variables …

    gatech Repository record for Drive System Design Methodology for a Single Main Rotor Helicopter (opens in a new tab)

  16. Mechanical Design and Analysis of a Discrete Variable Transmission System for Transmission-Based Actuators

    … Other design elements involve the design of the shafting, achieving the desired configuration, bearings, housing and the design of a gear shifting mechanism. A detailed kinematic and dynamic analysis of the entire gear system is required for the design of the various components mentioned above. …

    ut-knoxville Repository record for Mechanical Design and Analysis of a Discrete Variable Transmission System for Transmission-Based Actuators (opens in a new tab)

  17. An Investigation on In-Process SPC Sampling Frequency for Shaft Bearing Turning Process

    The machining processes have the uniqueness of discrete production and flexible scheduling as cellular manufacturing design. To ensure the quality of machining products, control charts for Statistical Process Control (SPC) has been implemented in the company to monitor the machining process. …

    northern-iowa Repository record for An Investigation on In-Process SPC Sampling Frequency for Shaft Bearing Turning Process (opens in a new tab)

  18. Methodology of evaluation of in-service loads applied to the output shafts of automatic transmissions.

    This work presents a novel methodology for evaluation of in service loads applied to the output shafts of automatic transmissions. It also presents a novel methodology of data reduction for shaft load signals as an alternative to the cycle counting methods. Current durability testing of automatic …

    unsw Repository record for Methodology of evaluation of in-service loads applied to the output shafts of automatic transmissions. (opens in a new tab)

  19. Errors in constant-velocity shaft couplings

    A Multiloop spatial system of rotations is used to represent a shaft coupling, allowing a transmission plane which may deviate from the plane of symmetry to be specified. The plane of transmission, for intersecting input and output shaft axes, is the locus of intersections of screw axes that …

    njit Repository record for Errors in constant-velocity shaft couplings (opens in a new tab)

Page 1 of 2