Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 247 for “"Shake Table"”.

  1. Advances in Shake Table Control and Substructure Shake Table Testing

    Shake table tests provide a true representation of seismic phenomena including a fully dynamic environment with base excitation of the test structure. For this reason shake tables have become a staple in many earthquake engineering laboratories. While shake tables are widely used for research and …

    jhu Repository record for Advances in Shake Table Control and Substructure Shake Table Testing (opens in a new tab)

  2. A visualization of an experiment on a shake table

    … developed specifically for experiments run on a shake table for earthquake simulating tests but could be used for any experiment that involves movement and instrumentation. By integrating the results obtained from the instruments used during an experiment it is possible to display, on a computer …

    ubc Repository record for A visualization of an experiment on a shake table (opens in a new tab) Download PDF for A visualization of an experiment on a shake table (opens in a new tab)

  3. Shake table testing of hybrid wood shear wall system

    … re-center. This thesis presents the results of a shake table test program that focused on testing of a one-story full-scale hybrid wood shear wall system comprised of a post-tensioned CLT wall panel with Light-frame wood shear (LiFS) wall panels on each side. The testing was conducted at CSU's …

    colostate Repository record for Shake table testing of hybrid wood shear wall system (opens in a new tab)

  4. Shake table testing of an Oak Street Bridge bent model

    … the same bent in its as-built condition on the shake table at UBC's Earthquake Engineering Research Laboratory. The prototype bent was scaled to 0.27 size, and the dead load was incorporated as a mass block attached to the cap beam. The specimen was instrumented internally with strain gauges on …

    ubc Repository record for Shake table testing of an Oak Street Bridge bent model (opens in a new tab) Download PDF for Shake table testing of an Oak Street Bridge bent model (opens in a new tab)

  5. Shake table testing of a two-story CLT platform building

    … building test conducted at the NHERI@UCSD Shake Table in San Diego, California. The testing was divided into three phases, with each phase testing a different wall configuration. The first two phases investigated the effects of different CLT panel aspect ratios (height:width) on the …

    colostate Repository record for Shake table testing of a two-story CLT platform building (opens in a new tab)

  6. Development of advanced control strategies for high performance shake table tests

    Shake table test provides a feasible solution for evaluating structural performances in earthquake engineering. It can test structural system in real time. However, high fidelity shake table control remains a challenging issue due to several difficulties, such as hydraulic actuator nonlinearity and …

    ubc Repository record for Development of advanced control strategies for high performance shake table tests (opens in a new tab) Download PDF for Development of advanced control strategies for high performance shake table tests (opens in a new tab)

  7. Seismic behaviour of steel plate shear walls by shake table testing

    … a similar four-storey specimen was tested on the shake table under low, medium and intense dynamic horizontal base motions. The two single storey and one four-storey test specimens were loaded to maximum displacement ductilities of 7 x δƴ, 6 x δƴ and 1.6 x δƴ, during the first and second phases of …

    ubc Repository record for Seismic behaviour of steel plate shear walls by shake table testing (opens in a new tab) Download PDF for Seismic behaviour of steel plate shear walls by shake table testing (opens in a new tab)

  8. Shake Table Studies on Soil-Abutment-Structure Interaction in Skewed Bridges

    … under dynamic loading based on large-scale shake table tests at the University of Nevada, Reno. Three 5.5-ft high abutment walls at three skew angles of 0º, 30º, and 45º with a projected width of 10 ft in the direction of motion were impacted by a bridge superstructure and pushed in the …

    unr Repository record for Shake Table Studies on Soil-Abutment-Structure Interaction in Skewed Bridges (opens in a new tab)

  9. Full-Scale Shake Table Cyclic Simple Shear Testing of Liquefiable Soil

    This research consists of full-scale shake table tests to investigate liquefaction of sandy soils. Consideration of the potential and consequences of liquefaction is critical to the performance of any structure built in locations of high seismicity underlain by saturated granular materials as it is …

    calpoly Repository record for Full-Scale Shake Table Cyclic Simple Shear Testing of Liquefiable Soil (opens in a new tab)

  10. Scale Model Shake Table Testing of Underground Structures in Soft Clay

    … empirical gap through the use of scale model shake table testing. Underground seismic soil-structure interaction (USSSI) effects were investigated for a stiff rectangular tunnel cross-section embedded within soft clay. San Francisco Young Bay Mud was used as a prototype soil for developing a …

    calpoly Repository record for Scale Model Shake Table Testing of Underground Structures in Soft Clay (opens in a new tab)

  11. Shake Table Studies of a Steel Girder Bridge System with ABC Connections

    … pier. The bridge system was tested to failure on shake tables under successive motions simulating scaled versions of the 1994 Northridge-Sylmar earthquake. Results demonstrated that the performance of the bridge model was comparable to cast-in-place bridges as columns underwent 6.9% resultant …

    unr Repository record for Shake Table Studies of a Steel Girder Bridge System with ABC Connections (opens in a new tab)

  12. Shake table tests for pulse-generated active-seismic control of frame structure

    … control forces through actuators beyond an acceptable range of deformations to minimize lateral drift and hence the potential structural and nonstructural damage. The research project involves tests of small-scale frames on a shake table, with and without active force control. Two single-storey …

    ottawa-retro Repository record for Shake table tests for pulse-generated active-seismic control of frame structure (opens in a new tab)

  13. Scale Model Shake Table Testing of Seismic Earth Pressures in Soft Clay

    This research consists of scale model shake table tests to investigate the development of seismic earth pressures in soft clay. The soft clay was modeled after prototype San Francisco Bay Mud consisting of a mixture of kaolinite, bentonite, class C fly ash and water. A flexible walled testing …

    calpoly Repository record for Scale Model Shake Table Testing of Seismic Earth Pressures in Soft Clay (opens in a new tab)

  14. Scale Model Shake Table Testing of Shallow Embedded Foundations in Soft Clay

    This research involves shake table testing of 1g scale models that mimic the coupled seismic response of a structure on a shallow mat foundation and foundation soil (known as soil-foundation-structural-interaction or SFSI). In previous research, SFSI effects have been quantified through analytical …

    calpoly Repository record for Scale Model Shake Table Testing of Shallow Embedded Foundations in Soft Clay (opens in a new tab)

  15. Shake table test of Oak Street Bridge bent: correlation of analysis and experiment

    … on full- or reduced-scale structures, especially shake table tests, have provided insight into the static and dynamic behavior of structures subjected to earthquakes. Experimental testing is both expensive and time-consuming, and sometimes it is simply not practical to conduct seismic tests. …

    ubc Repository record for Shake table test of Oak Street Bridge bent: correlation of analysis and experiment (opens in a new tab) Download PDF for Shake table test of Oak Street Bridge bent: correlation of analysis and experiment (opens in a new tab)

  16. Mitigation of Liquefaction-Induced Shallow Foundation Movements using Scaled 1g Shake Table Tests

    … four mitigation strategies using 1g scaled shake table model tests to evaluate their effectiveness in reducing liquefaction-induced settlement and tilt: (i) full-length (FL) sheet piles, (ii) full-length sheet piles combined with lowering groundwater (SPGW), (iii) partial floating sheet …

    unr Repository record for Mitigation of Liquefaction-Induced Shallow Foundation Movements using Scaled 1g Shake Table Tests (opens in a new tab)

  17. 1-g Shake Table Experimental Evaluation of Building Settlements Founded on Liquefiable Soils

    … Our research is based on a series of 1-g shake table experiments using a transparent soil box to reproduce liquefaction-induced building settlements. Settlements were evaluated using a scaled model of a building foundation representative of a lightly loaded single to double story building. …

    unr Repository record for 1-g Shake Table Experimental Evaluation of Building Settlements Founded on Liquefiable Soils (opens in a new tab)

  18. Measuring Liquefied Residual Strength Using Full-Scale Shake Table Cyclic Simple Shear Tests

    This research consists of full-scale cyclic shake table tests to investigate liquefied residual strength of #2/16 Monterey Sand. A simple shear testing apparatus was mounted to a full-scale one-dimensional shake table to mimic a confined layer of saturated sand subjected to strong ground motions. …

    calpoly Repository record for Measuring Liquefied Residual Strength Using Full-Scale Shake Table Cyclic Simple Shear Tests (opens in a new tab)

  19. Development and implementation of model reference adaptive hierarchical control framework for shake table tests

    … under earthquake excitation can be simulated by shake table tests. However, the performance of the shake table is affected by the Control-Structure Interaction (CSI) effect. In recent years, nonlinear control algorithms were developed to compensate for the CSI effect. In this study, a model …

    ubc Repository record for Development and implementation of model reference adaptive hierarchical control framework for shake table tests (opens in a new tab) Download PDF for Development and implementation of model reference adaptive hierarchical control framework for shake table tests (opens in a new tab)

  20. In-plane shake-table testing of unreinforced masonry walls strengthened with fibre reinforced-plastics

    … in seismic retrofits. Limited full-scale shake table testing has been performed, and a research collaboration between The University of British Columbia and Public Works and Government Services Canada, Pacific Region was established to explore this type of testing on the application of …

    ubc Repository record for In-plane shake-table testing of unreinforced masonry walls strengthened with fibre reinforced-plastics (opens in a new tab) Download PDF for In-plane shake-table testing of unreinforced masonry walls strengthened with fibre reinforced-plastics (opens in a new tab)

Page 1 of 13