Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 58 for “"Shake Table Testing"”.

  1. Shake table testing of hybrid wood shear wall system

    … re-center. This thesis presents the results of a shake table test program that focused on testing of a one-story full-scale hybrid wood shear wall system comprised of a post-tensioned CLT wall panel with Light-frame wood shear (LiFS) wall panels on each side. The testing was conducted at CSU's …

    colostate Repository record for Shake table testing of hybrid wood shear wall system (opens in a new tab)

  2. Advances in Shake Table Control and Substructure Shake Table Testing

    Shake table tests provide a true representation of seismic phenomena including a fully dynamic environment with base excitation of the test structure. For this reason shake tables have become a staple in many earthquake engineering laboratories. While shake tables are widely used for research and …

    jhu Repository record for Advances in Shake Table Control and Substructure Shake Table Testing (opens in a new tab)

  3. Shake table testing of an Oak Street Bridge bent model

    Further to the slow cyclic testing of a 0.45 scale model of a two column bent from the Oak Street Bridge from 1993-1995, a testing program was devised to test a smaller 0.27 scale model of the same bent in its as-built condition on the shake table at UBC's Earthquake Engineering Research …

    ubc Repository record for Shake table testing of an Oak Street Bridge bent model (opens in a new tab) Download PDF for Shake table testing of an Oak Street Bridge bent model (opens in a new tab)

  4. Shake table testing of a two-story CLT platform building

    … building test conducted at the NHERI@UCSD Shake Table in San Diego, California. The testing was divided into three phases, with each phase testing a different wall configuration. The first two phases investigated the effects of different CLT panel aspect ratios (height:width) on the …

    colostate Repository record for Shake table testing of a two-story CLT platform building (opens in a new tab)

  5. Seismic behaviour of steel plate shear walls by shake table testing

    … broaden the scope of the code, an experimental testing program accompanied by numerical investigation was conducted at the University of British Columbia. This effort was in collaboration with researchers at the University of Alberta and a team of consulting engineers. During the first phase of …

    ubc Repository record for Seismic behaviour of steel plate shear walls by shake table testing (opens in a new tab) Download PDF for Seismic behaviour of steel plate shear walls by shake table testing (opens in a new tab)

  6. Scale Model Shake Table Testing of Underground Structures in Soft Clay

    … empirical gap through the use of scale model shake table testing. Underground seismic soil-structure interaction (USSSI) effects were investigated for a stiff rectangular tunnel cross-section embedded within soft clay. San Francisco Young Bay Mud was used as a prototype soil for developing a …

    calpoly Repository record for Scale Model Shake Table Testing of Underground Structures in Soft Clay (opens in a new tab)

  7. Scale Model Shake Table Testing of Seismic Earth Pressures in Soft Clay

    This research consists of scale model shake table tests to investigate the development of seismic earth pressures in soft clay. The soft clay was modeled after prototype San Francisco Bay Mud consisting of a mixture of kaolinite, bentonite, class C fly ash and water. A flexible walled testing …

    calpoly Repository record for Scale Model Shake Table Testing of Seismic Earth Pressures in Soft Clay (opens in a new tab)

  8. Scale Model Shake Table Testing of Shallow Embedded Foundations in Soft Clay

    This research involves shake table testing of 1g scale models that mimic the coupled seismic response of a structure on a shallow mat foundation and foundation soil (known as soil-foundation-structural-interaction or SFSI). In previous research, SFSI effects have been quantified through analytical …

    calpoly Repository record for Scale Model Shake Table Testing of Shallow Embedded Foundations in Soft Clay (opens in a new tab)

  9. In-plane shake-table testing of unreinforced masonry walls strengthened with fibre reinforced-plastics

    … being the use of composite materials. Various testing has been performed on these materials, and on some of their structural applications in seismic retrofits. Limited full-scale shake table testing has been performed, and a research collaboration between The University of British Columbia and …

    ubc Repository record for In-plane shake-table testing of unreinforced masonry walls strengthened with fibre reinforced-plastics (opens in a new tab) Download PDF for In-plane shake-table testing of unreinforced masonry walls strengthened with fibre reinforced-plastics (opens in a new tab)

  10. Shake table testing of concrete portal frame with high spray dryer ash (SDA) content

    … concrete. The frames were tested on the uniaxial shake table at the Colorado State University (CSU), Engineering Research Center (ERC), by placing two frames of the same mix type parallel to each other for stability. The scaled seismic mass is then placed on the frame and the instrumentation is …

    colostate Repository record for Shake table testing of concrete portal frame with high spray dryer ash (SDA) content (opens in a new tab)

  11. Impedance-Matching Control Design for Shake-Table Testing and Model-in-the-Loop Simulations

    … (RTHS) by earthquake engineers, involve physical testing of structures, systems, or components, with surrounding environment represented virtually using numerical models, and loading devices (actuators) controlled to simulate the effect of the virtual environment at the boundary of the test …

    buffalo Repository record for Impedance-Matching Control Design for Shake-Table Testing and Model-in-the-Loop Simulations (opens in a new tab)

  12. Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures

    … research on the deformable rolling bearing by testing it on a shake table using half-length scale versions of prototype houses and small bridges in three-directional seismic excitation. The results showed that the deformable rolling bearings provide significant seismic protection of lightweight …

    buffalo Repository record for Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures (opens in a new tab)

  13. Seismic performance of unbonded post-tensioned precast wall systems subjected to shake table testing

    … a series of large-scale experimental shake table tests were conducted on four unbonded post-tensioned precast Single Rocking Walls (SRWs) and four Precast Wall with End Columns (PreWEC) systems by subjecting them to a set of earthquake excitations with varying intensities. These walls …

    iastate Repository record for Seismic performance of unbonded post-tensioned precast wall systems subjected to shake table testing (opens in a new tab)

  14. Seismic performance of unbonded post-tensioned precast wall systems subjected to shake table testing

    … a series of large-scale experimental shake table tests were conducted on four unbonded post-tensioned precast Single Rocking Walls (SRWs) and four Precast Wall with End Columns (PreWEC) systems by subjecting them to a set of earthquake excitations with varying intensities. These walls …

    iastate Repository record for Seismic performance of unbonded post-tensioned precast wall systems subjected to shake table testing (opens in a new tab)

  15. Evaluation of Seismic Behaviour of Hollow Fibre-Reinforced Polymer (FRP) Piles using Shake Table Testing

    … fine sand and soft clay deposits using shaking table tests. A laminar shear box with a dimension of 1.0 m × 1.0 m and a depth of 1.0 m was employed to contain the soil medium and allow the soil to respond in the same fashion as the free field. Two types of composite group piles (2×2) made of …

    carleton Repository record for Evaluation of Seismic Behaviour of Hollow Fibre-Reinforced Polymer (FRP) Piles using Shake Table Testing (opens in a new tab)

  16. In-plane shake table testing of gravity load designed reinforced concrete frames with unreinforced masonry infill walls

    … motions. The first part of an experimental testing program carried out at the University of British Columbia (UBC) in Vancouver, Canada tested the performance of 1/2 scale Gravity Load Designed Reinforced Concrete (GLDRC) frames with unreinforced masonry walls. This testing program consisted …

    ubc Repository record for In-plane shake table testing of gravity load designed reinforced concrete frames with unreinforced masonry infill walls (opens in a new tab) Download PDF for In-plane shake table testing of gravity load designed reinforced concrete frames with unreinforced masonry infill walls (opens in a new tab)

  17. Study of Timber-frame Building Seismic behaviour by Means of numerical modelling and Full-scale shake table testing

    … walls is investigated too. Thirdly, a full-scale shake table test on a prefabricated 3-storey timber-frame building is described.

    trento Repository record for Study of Timber-frame Building Seismic behaviour by Means of numerical modelling and Full-scale shake table testing (opens in a new tab)

  18. Shake table testing and performance evaluation of a post-seismic repaired and retrofitted Oak Street Bridge bent with fibreglass wrapping system

    … had been severely damaged when tested on the shake table at the University of British Columbia Earthquake Lab (E. Davey, 1996). During testing the structure's overall behavior was brittle, and little plastic deformation was observed before sudden shear damage occurred in the cap beam at a very …

    ubc Repository record for Shake table testing and performance evaluation of a post-seismic repaired and retrofitted Oak Street Bridge bent with fibreglass wrapping system (opens in a new tab) Download PDF for Shake table testing and performance evaluation of a post-seismic repaired and retrofitted Oak Street Bridge bent with fibreglass wrapping system (opens in a new tab)

  19. Seismic behavior and design of low-rise reinforced concrete masonry with clay masonry veneer

    … work described here includes the design and testing of concrete masonry wall specimens with clay masonry veneer under quasi-static loading. Identical specimens were subjected to shake-table testing at another university. The experimental work described here also includes the design of a …

    texas Repository record for Seismic behavior and design of low-rise reinforced concrete masonry with clay masonry veneer (opens in a new tab)

  20. Design of Controlled Rocking Steel Frames to Limit Higher Mode Effects

    … mode effects is developed, and large-scale shake table testing is used to study the behaviour of a controlled rocking steel frame. Two mechanisms are proposed to mitigate the increase in structural forces due to higher mode effects, and these mechanisms are validated by shake table testing. …

    toronto-retro Repository record for Design of Controlled Rocking Steel Frames to Limit Higher Mode Effects (opens in a new tab)

Page 1 of 3