Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Shallow junctions"”.

  1. Formation & characterization of p/n shallow junctions in sub-micron MOSFETs

    The formation of shallow junctions in the source and drain regions is a major challenge to the continued success of scaling of complementary metal oxide semiconductors (CMOS) circuits. The formation of these device structures requires low-energy ion implantation and rapid thermal annealing (RTA). …

    njit Repository record for Formation & characterization of p/n shallow junctions in sub-micron MOSFETs (opens in a new tab)

  2. Temperature dependent current-voltage characteristics of TiSi2/n+/p silicon shallow junctions

    … of titanium silicide films on n+</sup>/p silicon shallow junctions, has been presented here. The fabrication technique involves the formation of shallow pn junctions, by ion-implantation of As+ through titanium films evaporated on P type silicon. The improvement of the activation of dopants has …

    njit Repository record for Temperature dependent current-voltage characteristics of TiSi2/n+/p silicon shallow junctions (opens in a new tab)

  3. Formation and characterization of n/p shallow junctions in sub-micron MOSFETs

    … Integrated Circuit (IC) technology require ultra shallow junctions in MOSFETs. The objective of this thesis is to study the leakage current in n/p shallow junctions and to correlate them with process steps required for the formation of shallow junctions. The leakage current measurements were …

    njit Repository record for Formation and characterization of n/p shallow junctions in sub-micron MOSFETs (opens in a new tab)

  4. Defect Engineering in the formation of Ultra-shallow junctions for advanced nano-metal-oxide-semiconductor technology

    The formation of ultra-shallow junctions (USJs) in silicon is demanded by progressive miniaturization of CMOS devices. The main objective of this work is to achieve highly doped and electrical activated USJs through defect engineering. Defects generated during processing can interact with doping …

    nus Repository record for Defect Engineering in the formation of Ultra-shallow junctions for advanced nano-metal-oxide-semiconductor technology (opens in a new tab) Download file for Defect Engineering in the formation of Ultra-shallow junctions for advanced nano-metal-oxide-semiconductor technology (opens in a new tab)

  5. Fabrication of ultra-shallow junctions and advanced gate stacks for ULSI technologies using laser thermal processing

    … processing (LTP) was employed to fabricate ultra-shallow p+/n junctions and advanced polycrystalline silicon (poly-Si) gate stacks for ultra-large scale integration technologies. The results show that LTP can form highly activated ultra-shallow p+/n junctions with step-like dopant profiles. In …

    nus Repository record for Fabrication of ultra-shallow junctions and advanced gate stacks for ULSI technologies using laser thermal processing (opens in a new tab) Download file for Fabrication of ultra-shallow junctions and advanced gate stacks for ULSI technologies using laser thermal processing (opens in a new tab)

  6. Temperature control and measurement in spike anneal

    … to activate the implanted species in Ultra Shallow junctions (USJ). The hardware and process modifications were directed to improve the spike sharpness. Different designs for the edge ring and the pyrometers have been tried and successfully implemented. This dilemma is resolved with the …

    ttu Repository record for Temperature control and measurement in spike anneal (opens in a new tab)

  7. Monolayer Doping for Fabrication of Recessed Channel MOSFETs

    … are shrinking, there is a need to achieve shallow junctions for better performance of non-planar structures such as FinFETs and 3D FETs. The implementation of conventional doping technique ion-implantation can be a hindering process for the shallow junctions as they tend to damage the …

    rit Repository record for Monolayer Doping for Fabrication of Recessed Channel MOSFETs (opens in a new tab)

  8. TiSi2/n+/p silicon junction formation by ion implantation through metal technique

    … of TiSi<sub>2</sub>/n<sup>+</sup>/p-Si shallow junctions are presented here. The formation of shallow n<sup>+</sup>-p junction, by ion implantation of As<sup>+</sup> through Ti films evaporated on p-Si substrates followed by Rapid Thermal Annealing ( RTA ) and conventional furnace …

    njit Repository record for TiSi2/n+/p silicon junction formation by ion implantation through metal technique (opens in a new tab)

  9. Self-Assembled Monolayers for Phosphorus Doping of Silicon for Field Effect Devices

    … device performance. Smaller transistors require shallower junctions, especially for the non-planar geometries such as FinFETs and nanowires which are becoming more common. Conventional doping techniques such as ion implantation and spin-on diffusants have difficulty producing shallow junctions, …

    rit Repository record for Self-Assembled Monolayers for Phosphorus Doping of Silicon for Field Effect Devices (opens in a new tab)

  10. Contact and source/drain engineering for advanced III-V field-effect transistors

    … that can provide abrupt, high-quality, ultra-shallow junctions with high doping concentration and conformal doping in the source/drain (S/D) and S/D extension regions, are required for advanced three-dimensional (3D) III-V MOSFETs. In this thesis, salicide-like contact metallization is …

    nus Repository record for Contact and source/drain engineering for advanced III-V field-effect transistors (opens in a new tab) Download file for Contact and source/drain engineering for advanced III-V field-effect transistors (opens in a new tab)

  11. Modelling and simulation of ion implantation induced damage

    … processes involved in the formation of ultra-shallow junctions. Good agreement between simulation results and experimental data for dopant concentration and activation were obtained in both bulk silicon and silicon-on-insulator. This shows that the simulations are predictive and can provide …

    nus Repository record for Modelling and simulation of ion implantation induced damage (opens in a new tab) Download file for Modelling and simulation of ion implantation induced damage (opens in a new tab)

  12. Impact of Nitrite on the Molecular Physiology of the Guppy (Poecilia Reticulata Peters, 1859) Gill Epithelium Tight Junction Complex

    … and compromised paracellular integrity (e.g., shallow junctions). Findings concur that NO2- primarily disrupts osmoregulation through transcellular pathways, with limited paracellular effects.

    york Repository record for Impact of Nitrite on the Molecular Physiology of the Guppy (Poecilia Reticulata Peters, 1859) Gill Epithelium Tight Junction Complex (opens in a new tab)

  13. Cobalt silicide characterization

    … sheet resistance on poly-silicon lines and shallow junctions. The mostly widely accepted silicide process, Titanium Silicide (TiSi2), was adopted because of its low resistivity. Major limitations of TiSi2 include an inability to form on narrow poly-lines and gate shorting. Cobalt silicide is …

    unlv Repository record for Cobalt silicide characterization (opens in a new tab) Download PDF for Cobalt silicide characterization (opens in a new tab)

  14. Development of an ion source for implantation of decaborane

    … generations of Si technology will require ultra shallow junctions (tens of nm) in the drain and source regions of MOS transistors. Fabrication of such shallow p-type junctions requires implantation of boron at ultra low energies ([identical to]1keV), below the limits of standard ion implantation …

    njit Repository record for Development of an ion source for implantation of decaborane (opens in a new tab)

  15. Experimental ion implantation system for decaborane ions

    … generations of Si technology will require ultra shallow junctions (tens of nm) in the drain and source regions of MOS transistors. Fabrication of such shallow p-type junctions requires implantation of boron at ultra low energies (< 1 keV), below the limits of standard ion implantation technology. …

    njit Repository record for Experimental ion implantation system for decaborane ions (opens in a new tab)

  16. Micro-structural modifications of semiconductor systems under irradiation: experiment, modeling and simulation analysis.

    … a great interest in the formation of ultra-shallow junctions essential in nanoscale metal-oxide-semiconductor technology. An intriguing poorly understood issue is the post-implant kinetics of the defects-dopant system in the extremely far-from-the equilibrium conditions caused by the laser …

    catania Repository record for Micro-structural modifications of semiconductor systems under irradiation: experiment, modeling and simulation analysis. (opens in a new tab)

  17. Fundamental understanding of the physics and modeling of boron source/drain extension evolution during CMOS device fabrication

    … conventional scaling of the source/drain junctions, the semiconductor industry has relied heavily on decreasing the implant energy, and also on minimizing the thermal budget of the activation anneal. With Transient Enhanced Diffusion less pronounced for low implant energies and sharper …

    texas Repository record for Fundamental understanding of the physics and modeling of boron source/drain extension evolution during CMOS device fabrication (opens in a new tab)

  18. Organic functionalisation, doping and characterisation of semiconductor surfaces for future CMOS device applications

    … are based on the use of semiconductor junctions formed by the introduction of dopant atoms into the material using various methodologies and at device sizes below 10 nm, high concentration gradients become a necessity. Doping, the controlled and purposeful addition of impurities to a …

    cork Repository record for Organic functionalisation, doping and characterisation of semiconductor surfaces for future CMOS device applications (opens in a new tab)

  19. Four probe, In Situ electrical characterization of dopant structures in silicon

    … Roadmap for Semiconductors (ITRS) for ultra-shallow junctions. We are able to explain the depth dependence with a conductivity model incorporating a finite segregation length of the grown layer combined with surface scattering. Finally we extend this four-probe work towards the measurement of …

    unsw Repository record for Four probe, In Situ electrical characterization of dopant structures in silicon (opens in a new tab)

Page 1 of 2