Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Shape method"”.
-
Dynamic characteristics of a hyperboloid shell of revolution with application to flexible couplings
… is defined by the equation of a hyperbola. Two methods are utilized to find the first bending frequency of the HSR: Finite Element Method and the Assumed Mode Shape Method. the Fiinite Element Method is applied to Timoshenko Beam Theory, and Galerkin's Assumed Mode Shape Method is applied to the …
-
Development, test and application of a new method of particle shape analyses based on the concept of the fractal dimension
Shape analysis methods based on the concept of the fractal dimension are emerging as a new method of quantifying complex particle shapes. The concept of the fractal dimension stems from the approximately linear relationship between the logarithm of the particle perimeter and the logarithm of the …
-
Linear and nonlinear model reduction in structural dynamics with application to model updating
… of degrees of freedom (DOF) in the model. Two methods are presented to reconcile the differences: (1) "expanded mode shape*' method, in which the measured mode shapes are expanded to the full model dimension, and (2) model reduction, in which the large model is reduced to the measurement …
-
Towards improving the manufactured consistency of wooden musical instruments through frequency matching
… product. The aim of this thesis is to create a method in which a soundboard can be frequency matched to a brace in order to meet a set standard after assembly. A simple analytical model is created in order to study the effect of the plate's stiffness and brace thickness on the combined system. …
-
A COMPARATIVE ANALYSIS OF FAR PART 13 VS. FAR PART 15 IN THE PROCUREMENT OF COMMERCIAL ITEMS IN GOVERNMENT CONTRACTING
… culture and local precedent further shape method selection, often discouraging use of legally permissible flexibilities. This behavior slows acquisition timelines, increases administrative workload, and limits operational responsiveness. The study offers recommendations to improve SAP …
-
Advanced retinal optical coherence tomography image analysis in neuroinflammatory disorders
… pathology. However, traditional OCT analysis methods might be insufficient to detect subtle retinal changes. The objective of this work was to optimize image analysis of macular OCT images using two parallel approaches: 1) developing a semi-automated intraretinal segmentation pipeline for …
-
A Dynamic Proton NMR Study of the Tris(trifluoro-2,4-Pentanedionato) Complexes of Aluminum(III) and Gallium(III)
… of these complexes and by the use of approximate methods they have calculated various kinetic parameters. Their experimental data indicate that the mechanism of exchange could process. In this thesis a more exact treatment of this exchange phenomenum has been undertaken. The exchange-broadened …
-
Rotational state of main belt asteroids that belong to old collisional families
… are typically identified through clustering methods based on orbital elements. However, alternative methods, such as the V-shape method, which analyses correlations between asteroid fragment sizes and their distance from the family centre, have proven effective in identifying very old and …
-
Optimization of Supersonic Aircraft Wing-Box using Curvilinear SpaRibs
… for the natural frequencies and natural mode shape tailoring. The SpaRibs concept is implemented in a new MATLAB-based optimization framework referred to as EBF3SSWingOpt. This framework interfaces different analysis software to perform the tasks required. VisualDOC is used as optimizer; the …
-
Using DAPPER to Extract the Photon Strength Function of 58Fe via the Inverse Oslo and Shape Methods
… indirect probe of the (n,γ) reaction. The Oslo method was used to extract the PSF and nuclear level density simultaneously while the Shape method was used to verify the slope of the PSF for 58Fe which was found to agree well with model predictions and with the PSFs of 56,57Fe determined …
-
An NMR study of diffusion of CO on metal surfaces
… technique for studying diffusion (called an S-shape sequence) has been implemented. He finds that the CO adlayer on Pd may be present in one of two phases, a low and a high temperature phase. The transition temperature from one phase to the other depends on cluster size and has been expressed …
-
Spectral line shape theory in dense stellar plasmas
Spectral line shapes describe the distribution of opacity from bound electronic transitions. Accurate line shape theory is therefore a necessary input for modeling photon transport through the wide range of plasma environments found in stars. Stark broadening, where charged particles perturb the …
-
Experimental study of 19C via gamma-ray lifetime and knockout measurements
… in 19C has been measured using both the line-shape method and the Recoil Distance Method. The deduced B(M1;3/2+→1/2+) transition strength represents one of the most hindered M1 transitions among light nuclei. The result is compared to large-scale shell model calculations, which predict a …
-
Single selective inversion dynamic NMR applied to complex organometallic exchange
… Nuclear Magnetic Resonance (NMR) spectroscopic methods are of limited use in complex systems. The classical line-shape method generally cannot provide mechanistic detail, and the actual data analysis may well be intractable if multi-exchange processes are occurring. Spin relaxation methods are …
-
Incorporating Acoustical Consistency in the Design for Manufacturing of Wooden Guitars
… of a guitar soundboard brace is a good method for taking into account variations in the mechanical properties of the wooden soundboard plate. In this thesis, the effects of a scalloped-shaped brace on the natural frequencies of a brace-plate system have been studied and tools have been …
-
Toolpath and Cutter Orientation Optimization in 5-Axis CNC Machining of Free-form Surfaces Using Flat-end Mills
… work proposes an optimal toolpath generation method by machining the curved surface patch-by-patch, considering surface normal variations using a fuzzy clustering technique. This method allows faster CNC machining with reduced slow angular motion of tool rotational axes and reduces sharp …
-
Mechanisms for the interactions between acidic oils and surfactant enhanced alkaline solutions.
… alkaline reagents. A precise and accurate method for monitoring and measuring both equilibrium and transient interfacial tension is required to help to develop an understanding of the mechanisms that govern the interactions of acidic oils with alkaline reagents. For this purpose, an …
-
Exploring Central Collisions in the Reaction 58Ni+48Ca at 25 AMeV with CHIMERA
… centrality selection we have chosen the event shape method, based on the construction of the kinetic energy tensor for the analysis of the configuration of the matter in the momentum space at the decay stage. It has been noticed how a cut on the shape variable "flow angle" (at 60 degrees) …