Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Sharp edged orifice"”.
-
Liquid-gas flow in venturi meter and sharp edged orifice
… throat venturi meter and a 5/32 inch thin plate sharp-edged orifice for the horizontal cocurrent, flow of the air-water two-phase two-fluid system in a 3/4 inch pipe under essentially isothermal conditions, are presented. This is the first critical study of two phase flow in a Venturi meter and. …
-
A study of tip-leakage flow through orifice investigations
… fluid dynamics of flow through plain-faced long orifices was investigated with the hope of gaining insight into the fluid dynamics of tip leakage flow. The Reynolds number range investigated was greater than 10*. Measurements were made of the discharge coefficient as a function of back pressure …
-
Dynamics of vortex rings in cross-flow
… was a straight walled tube, and the other was a sharp-edged orifice with the same exit diameter. Continuous pulsation was used to study its effects on the development of vortex rings and their penetration in a cross-flow. Pulsation frequency and the ratio of piston velocity to cross-flow velocity …
-
Lagrangeovský model pohybu kavitační bubliny
… in a fluid passing by a Venturi tube and a sharp-edged orifice plate.
-
The effects of piston stroke length and exit geometry on the kinematics of vortex rings
… one a conventional straight tube and the other a sharp edged orifice with the same exit diameter as the straight tube. Rings were generated in the University of Tennessee Space Institute water tunnel in order to facilitate the study of ring characteristics in both a quiescent fluid and in the …
-
Quantitative imaging of multi-component turbulent jets
… using helium as a substitute working fluid. A sharp-edged orifice round turbulent jet is used to emulate releases in which leak geometry is circular. Effects of buoyancy, crossflow and adjacent surfaces were studied over a wide range of Froude numbers. The velocity fields of turbulent jets were …
-
The Design, Experimentation, and Characterization of a High-Pressure Round-Edged Orifice Plate Test Facility
Orifice plates are commonly found in fluid measurement devices, piping systems, and engines. They are used as flow measurement devices, appear as restrictors in piping, or are used as fuel injectors inside internal combustion engines. While there are equations that predict the discharge coefficient …
-
Intake valve flow characteristics of production cylinder heads
… was similar to that of a converging nozzle and a sharp-edged orifice, respectively. Finally, the discrepancies between the discharge coefficient trends observed with ideal experimental setups and production cylinder heads was illustrated. The discrepancies were found to be the result of a shift in …
-
Experimental investigations of the influence of Reynolds number and boundary conditions on a plane air jet.
… mean velocity profiles are evident for the sharp-edged orifice configuration (r* ≈ 0) and top hat profiles emerge when r* ≥1.80. As r* is increased from 0 to 3.60, both the near and the far field decay and the spreading rates of the plane jet are found to decrease. Hence, the sharp-edged …
-
Two-Phase Flow Measurement of Geothermal Fluid
… The extensive field-testing of both two-phase orifice plate and Load Cells was undertaking on large diameter pipelines (≥10 inch) at several fields in Indonesia and New Zealand is described. Details of equipment design, site layout, installation and test procedures are also covered. The …
-
Simulating and diagnosing three-dimensional multistage hydraulic fracturing with the generalized finite element method
… and hydraulic fractures are modeled with the sharp-edged orifice equation and the use of 1D connecting elements. A propagation criterion based on regularization of Irwin’s criterion is adopted and the time step that leads to propagation of the fractures is automatically calculated assuming a …
-
Breakup characteristics of a liquid jet in subsonic crossflow
… were measured for two injectors: one with a sharp transition and the other with a smooth transition. It was found that the spray created by the injector with a sharp transition forms large irregular structures while one with smooth transition produces a smooth liquid jet. The spray transition …