Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Shear Area"”.

  1. The Effects of Shear Deformation in Rectangular and Wide Flange Sections

    Shear deformations are, generally, not considered in structural analysis of beams and frames. But shear deformations in members with low clear span-to-member depth ratio will be higher than normally expected, thus adversely affecting the stiffness of these members. Inclusion of shear deformation in …

    vt Repository record for The Effects of Shear Deformation in Rectangular and Wide Flange Sections (opens in a new tab)

  2. Experimental investigation of factors influencing interface shear strength

    … thesis is focused on investigating the interface shear strength of cold joints subjected to pure shear through an experimental study comprising 21 push-off test specimens. Five key variables were examined: interface roughness, concrete shear area, reinforcement ratio, reinforcement detailing, and …

    texas Repository record for Experimental investigation of factors influencing interface shear strength (opens in a new tab)

  3. Effects of Intermittent Pneumatic Compression on Leg Blood Flow and Vascular Function After Spinal Cord Injury

    … artery diameter, BF, FMD% and FMD normalized to shear area-under-curve (FMD%/AUC) were similar between legs at rest. A two-way repeated measures ANOVA (leg x time) revealed that during IPC, BF tended to increase (P=0.063) in EXP leg (8±2 to 11±3 mL/min at 15 mins; +42±23%), with no change …

    usm Repository record for Effects of Intermittent Pneumatic Compression on Leg Blood Flow and Vascular Function After Spinal Cord Injury (opens in a new tab)

  4. Thermodynamic analysis of single-screw oil-flooded refrigerant compressors

    … are presented and three of these mechanisms, oil shear, oil displacement, and external oil pumping, are dealt with analytically. The computer model, the most comprehensive model developed, gave detailed thermodynamic information about the internal processes. For the example presented, the powers …

    vt Repository record for Thermodynamic analysis of single-screw oil-flooded refrigerant compressors (opens in a new tab)

  5. Design Manual Development for a Hybrid, FRP Double-Web Beam and Characterization of Shear Stiffness in FRP Composite Beams

    … such beam properties as bending modulus, shear stiffness, failure mode, and ultimate capacity. Measuring and calculating the shear stiffness has proven to be an area of particular interest and difficulty. Shear stiffness is calculated using Timoshenko beam theory which combines the shear …

    vt Repository record for Design Manual Development for a Hybrid, FRP Double-Web Beam and Characterization of Shear Stiffness in FRP Composite Beams (opens in a new tab)

  6. The Mechanical Behavior of the Glued-in Plate Connection: An experimental study on bonded timber connections

    … failure compared to unper forated plates. The shear area of the glue dowel has a linear increasing correlation to the load capacity. Both plate thickness and embedment length have an influence on load capacity up to a certain limit and then plateaus. Distributing the perforation of the plate, …

    chalmers Repository record for The Mechanical Behavior of the Glued-in Plate Connection: An experimental study on bonded timber connections (opens in a new tab)

  7. Investigation of the Inverse Fracture Occurrence in Drop Weight Tear Tests of X65 Q&T Pipeline Steels Under Impact Loading

    … the Charpy impact test indicates that the 85% shear area transition temperature is ≈ 105°C, while reverse fracture appears at higher temperatures in the range of −15°C to −45°C. This transition temperature shift is allegedly attributed to the compressive pre-strain induced by the impact hammer …

    tamu Repository record for Investigation of the Inverse Fracture Occurrence in Drop Weight Tear Tests of X65 Q&T Pipeline Steels Under Impact Loading (opens in a new tab)

  8. Accurate quantification of rock joint roughness and development of a new peak shear strength criterion for joints

    … replicas of the natural rock joint. Direct shear tests were performed on rough model material joints at five different normal stresses, in the same directions which were used for the roughness measurements. The scratched areas on rough joints resulting from direct shear tests were used along …

    arizona-thes Repository record for Accurate quantification of rock joint roughness and development of a new peak shear strength criterion for joints (opens in a new tab)

  9. The Effect of Woodpecker Damage on the Reliability of Wood Utility Poles

    … strength. In the course of this research, some shear failures were observed. Utility poles being slender cantilevered structures, failures in shear are not expected. The objectives of this study were to determine the effective shear strength of wood utility poles and to determine the reliability …

    waterloo Repository record for The Effect of Woodpecker Damage on the Reliability of Wood Utility Poles (opens in a new tab)

  10. Ανάλυση μικρομετακινήσεων στη περιοχή του νοτίου Αιγαίου πελάγους με συνδιασμό ιστορικών γεωδαιτικών, γεωφυσικών και σύγχρονων δορυφορικών μετρήσεων

    … the temporal crustal deformations of the study area (South - East Aegean Sea) through historical geodetic measurements and the investigation of their correlation with the seismotectonic behavior of the region.The study area is further divided into four subareas named Cyclades, Aegean (referring …

    greece Repository record for Ανάλυση μικρομετακινήσεων στη περιοχή του νοτίου Αιγαίου πελάγους με συνδιασμό ιστορικών γεωδαιτικών, γεωφυσικών και σύγχρονων δορυφορικών μετρήσεων (opens in a new tab)

  11. Toughness and separation improvement of thick plate X70 pipeline steels

    … impacted region up to 40 mm into the specimen. Shear area (SA) rating methods designed to eliminate IF from the rating were tested and limitations were identified. Short and jagged instrumented DWTT force-time/displacement traces were correlated to specimens that exhibited an “arrowhead” …

    colo-mines Repository record for Toughness and separation improvement of thick plate X70 pipeline steels (opens in a new tab)

  12. Možnosti dodatečného zesilování dřevěných prvků

    Tato diplomová práce se zabývá možnostmi dodatečného zesílení dřevěných prvků s použitím různých typů BFRP materiálů. V rámci praktické části byl proveden experiment zesílení překližovaných desek externím zesílením za pomoci BFRP tkanin s odlišnou plošnou hmotností. V rámci provedených pevnostních …

    brno-tech Repository record for Možnosti dodatečného zesilování dřevěných prvků (opens in a new tab)