Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Shear Buckling"”.

  1. Buckling and Shear Capacity of Horizontally Curved Steel Plate Girders

    … impact of horizontal curvature on plate girder shear strength has not been thoroughly evaluated. While a number of studies have looked at the shear strength of slender, straight, plate girder webs, limited studies have examined shear strength of horizontally curved plate girders with slender …

    nebraska Repository record for Buckling and Shear Capacity of Horizontally Curved Steel Plate Girders (opens in a new tab)

  2. Buckling and first-ply failure of mechanically coupled composite structures

    … configurations. Design spaces of compression and shear buckling of finite length Bend-Twist (B-T) coupled laminates manufactured from traditional ply orientations (containing 0°, 90° and ±45° ply orientations), with simply supported edges, are investigated. Both local and global optima of …

    glasgow Repository record for Buckling and first-ply failure of mechanically coupled composite structures (opens in a new tab) Download PDF for Buckling and first-ply failure of mechanically coupled composite structures (opens in a new tab)

  3. A Component-Based Approach to Modelling Beam-End Buckling Adjacent to Beam-Column Connections in Fire

    … (Newman, 2000) provided ample evidence that both shear buckling of beam webs and beam bottom-flange buckling, near to the ends of steel beams, are very prevalent under fire conditions. Both of these phenomena could affect the force distribution at the adjacent column-face connection bolt rows, and …

    whiterose Download PDF for A Component-Based Approach to Modelling Beam-End Buckling Adjacent to Beam-Column Connections in Fire (opens in a new tab)

  4. Experimental and Analytical Investigation of the Shear Strength of Unstiffened Tapered Steel Members

    … which also possess the least resistance to shear buckling. The web element's stress distribution in this region of relatively complicated geometry is unknown. For this reason, web stiffening plates are commonly used to brace the slender web elements against elastic shear buckling. The design …

    vt Repository record for Experimental and Analytical Investigation of the Shear Strength of Unstiffened Tapered Steel Members (opens in a new tab)

  5. Transverse Stiffener Requirements in Straight and Horizontally Curved Steel I-Girders

    … I-girders are capable of developing substantial shear postbuckling resistance due to tension field action and have demonstrated that the AASHTO LRFD equations for the tension field resistance in straight I-girders may be applied to curved I-girders within specific limits. However, the …

    gatech Repository record for Transverse Stiffener Requirements in Straight and Horizontally Curved Steel I-Girders (opens in a new tab)

  6. Topology Optimization of Steel Shear Fuses to Resist Buckling

    Shear-acting structural fuses are steel plates with cutouts subjected to in-plane lateral displacements during extreme loading events such as earthquakes, that dissipate energy through localized shear or flexural yielding mechanisms. Although previous studies have reported that fuses with specific …

    vt Repository record for Topology Optimization of Steel Shear Fuses to Resist Buckling (opens in a new tab)

  7. The structural behavior of cold-formed steel members with perforated elements

    … of cold-formed steel members depends on the buckling behavior of individual component elements, emphasis has been concentrated on the study of the instability and post-buckling strength of perforated elements. In this investigation, the buckling loads and post-buckling strength of stiffened …

    must-thes Repository record for The structural behavior of cold-formed steel members with perforated elements (opens in a new tab)

  8. Fatigue Performance of Welded Steel Girders with Corrugated Webs

    … to have high out-of-plane stiffness as well as shear buckling capacity. This permits the use of deeper web plates without the need for additional stiffeners. However, an important aspect that has not been studied to a large extent is the fatigue capacity of these structures. A number of fatigue …

    chalmers Repository record for Fatigue Performance of Welded Steel Girders with Corrugated Webs (opens in a new tab)

  9. The Flexibility and Strength of Corrugated Diaphragms and Folded Plates

    … previously studiedwith regald to applications in shear diaphragms, making use of itsinherent strength and stiffness prepeitios by suitable connections.The in-plane deflection is an important design factor and the sheardistortion component, due to eccentric transfer of fastener force intoprofile …

    salford Download PDF for The Flexibility and Strength of Corrugated Diaphragms and Folded Plates (opens in a new tab)

  10. Design of lightweight web core sandwich panels and application to residential roofs.

    … the thin sheet metal components against local buckling failure. The webs, in particular, must be thin and widely-spaced to minimize their impact on thermal performance. As a result, they are subject to a variety of potential local failure modes that limit the range of feasible roof designs. The …

    umn Repository record for Design of lightweight web core sandwich panels and application to residential roofs. (opens in a new tab)

  11. Design and Analysis of Honeycomb Structures with Advanced Cell Walls

    … with improved specific stiffness and specific buckling resistance while considering the manufacturing feasibility. The objective of the first part is to develop analytical models for general case honeycombs with non-linear cell walls. Using spline curve functions, the model can describe a wide …

    tamu Repository record for Design and Analysis of Honeycomb Structures with Advanced Cell Walls (opens in a new tab)

  12. Flange Buckling Behavior of Stainless Steel Girders with Trapezoidally Corrugated Webs - A parametric numerical study

    … one in steel girders is a way of increasing the shear buckling capacity, without the need of additional vertical stiffen ers. But, except for that, the corrugation of the web changes the bending behavior, more specifically the normal stress buckling behavior of the flange plate. Numerous …

    chalmers Repository record for Flange Buckling Behavior of Stainless Steel Girders with Trapezoidally Corrugated Webs - A parametric numerical study (opens in a new tab)

  13. The Design and Development of Lightweight Composite Wall, Roof, and Floor Panels for Rigid Wall Shelter

    … with screw and spot weld connections. Full scale shear wall tests on this type of shear wall system have been conducted, and it was found that the corrugated sheathing had rigid board behavior before it failed in shear buckling in sheathing and sometimes simultaneously in screw connection …

    unt Repository record for The Design and Development of Lightweight Composite Wall, Roof, and Floor Panels for Rigid Wall Shelter (opens in a new tab)

  14. Strength evaluation of honeycomb FRP sandwich panels with sinusoidal core geometry

    … subjected to out-of-plane compression and shear. Therefore, three major contributions are included in this dissertation: out-of-plane compression, out-of-plane shear, and study on facesheet laminates. Two analytical models, corresponding to pure compression and elastic buckling failure, …

    wvu Repository record for Strength evaluation of honeycomb FRP sandwich panels with sinusoidal core geometry (opens in a new tab)

  15. Design of Composite Steel-Concrete Bridges using Stainless Steel Girders with Currugated Webs

    … Girders with corrugated webs provide high shear-buckling capacity, resulting in slenderer web plates. Further, the proof stress of stainless steel is higher than that for conventional carbon steel that is often used in bridge sector. The aim of this study has been to evaluate the …

    chalmers Repository record for Design of Composite Steel-Concrete Bridges using Stainless Steel Girders with Currugated Webs (opens in a new tab)

  16. Computational and Experimental Investigation of Seismic Structural Fuse Shapes for Structural Systems

    … engineered cutouts leaving a configuration of shear-acting links remaining. There have been several studies on various cutout patterns for shear-acting structural fuses including butterfly-shaped links, hourglass-shaped links, elliptical holes, and link shapes obtained from topology …

    vt Repository record for Computational and Experimental Investigation of Seismic Structural Fuse Shapes for Structural Systems (opens in a new tab)

  17. The failure analysis of adhesively bonded joints

    … the failure load ofbondedjoints with thin postbuckling composite skins. The design of structural adhesively bonded joints is complicated by the presence of singularities at the ends of the joint and the lack of suitable failure criteria. Literature reviews indicate that bonded joint failure …

    unsw Repository record for The failure analysis of adhesively bonded joints (opens in a new tab)

  18. Response of fire exposed steel bridge girders

    … Under such fire scenarios, failure through web shear buckling is the most dominant failure limit state especially when web slenderness exceeds 50. Fire resistance and failure mode is highly influenced by fire intensity, exposure scenario, web slenderness, load level, and span length. Results …

    msu Repository record for Response of fire exposed steel bridge girders (opens in a new tab)

  19. Micro-mechanical Modelling of Polymeric Closed-cell Foams: Effect of Microstructural Variability on the Mechanical Properties

    … foam parameters on the global compressive and shear responses of closed-cell foams. Along with with these numerical foam models, irregular honeycomb specimens were manufactured using 3D printing and experimentally tested under compression in order to explore the deformation and failure …

    auckland-ms Repository record for Micro-mechanical Modelling of Polymeric Closed-cell Foams: Effect of Microstructural Variability on the Mechanical Properties (opens in a new tab)

Page 1 of 2