Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 299 for “"Shear Capacity"”.

  1. Seismic shear capacity of reinforced concrete elements

    … reinforcement subjected to reversed cyclic shear. This thesis involves three main parts which are described below. A rational model for the shear capacity of reinforced concrete is developed which takes into account the effect of previously existing diagonal cracks. The model is an extension …

    ubc Repository record for Seismic shear capacity of reinforced concrete elements (opens in a new tab) Download PDF for Seismic shear capacity of reinforced concrete elements (opens in a new tab)

  2. Anchorage-controlled shear capacity of prestressed concrete bridge girders

    As part of the ongoing research on shear at the Phil M. Ferguson Structural Engineering Laboratory (FSEL) located at The University of Texas at Austin, the anchorage controlled shear capacity of prestressed concrete bridge girders was in this research studied in two distinct ways, experimentally …

    texas Repository record for Anchorage-controlled shear capacity of prestressed concrete bridge girders (opens in a new tab)

  3. The shear capacity of reinforced concrete beam - column connections

    This thesis is to determine the shear capacity of a reinforced concrete beam column connection at zero moment. The joint under study is formed by casting the beam against a smooth column face with the top and bottom reinforcing bars projecting through the joint and no key or surface roughening …

    ubc Repository record for The shear capacity of reinforced concrete beam - column connections (opens in a new tab) Download PDF for The shear capacity of reinforced concrete beam - column connections (opens in a new tab)

  4. Characterization of Punching Shear Capacity of Thin Uhpc Plates

    … and contained no reinforcing steel to resist shear. The lack of steel reinforcement allowed for the possibility of a punching shear failure to occur from the application of a point load such as a wheel tire patch load. The model and optimized section served as the foundation for this research, …

    vt Repository record for Characterization of Punching Shear Capacity of Thin Uhpc Plates (opens in a new tab)

  5. Shear capacity of fiber reinforced polymer strengthened reinforced concrete beams.

    … major contribution of this thesis is towards the shear capacity and shear failure mechanism of reinforced concrete beams with adhesively bonded transverse near surface mounted fiber reinforced plastic plates. In shear strengthening, there are two forms of plate debonding that interact with each …

    adelaide Repository record for Shear capacity of fiber reinforced polymer strengthened reinforced concrete beams. (opens in a new tab)

  6. Shear Capacity of Hollow-Core Slabs with Concrete Filled Cores

    … method is not conducive to using transverse shear reinforcement, so concrete failure generally governs the shear capacity. Adding slab cross-sectional area is the intuitive way to increase the available shear capacity, but this increases the unit weight, may require a deeper section, and can …

    umn Repository record for Shear Capacity of Hollow-Core Slabs with Concrete Filled Cores (opens in a new tab)

  7. Buckling and Shear Capacity of Horizontally Curved Steel Plate Girders

    … impact of horizontal curvature on plate girder shear strength has not been thoroughly evaluated. While a number of studies have looked at the shear strength of slender, straight, plate girder webs, limited studies have examined shear strength of horizontally curved plate girders with slender …

    nebraska Repository record for Buckling and Shear Capacity of Horizontally Curved Steel Plate Girders (opens in a new tab)

  8. Nontraditional Limitations on the Shear Capacity of Prestressed Concrete Girders

    It was also determined that the requirement for longitudinal tension reinforcement near the support included in the 4th edition of the AASHTO LRFD Bridge Design Specifications may underestimate the demand on longitudinal tension reinforcement. Alternatively an equilibrium based approach is …

    uiuc Repository record for Nontraditional Limitations on the Shear Capacity of Prestressed Concrete Girders (opens in a new tab)

  9. Tensile and Shear Capacity of Post-Installed GFRP Bars in Concrete

    … series of tests were conducted with tensile and shear loading to characterize behavior of post-installed GFRP reinforcing bars and allow for comparison of their behavior to post-installed steel reinforcing bars. Specifically, two sizes of both steel and GFRP reinforcing bars (No. 5 and 8) were …

    umn Repository record for Tensile and Shear Capacity of Post-Installed GFRP Bars in Concrete (opens in a new tab)

  10. Shear capacity of dry-cast extruded precast/prestressed hollow-core slabs

    … concrete design codes yield conservative shear designs for precast/prestressed hollow-core slabs in the 203 to 305 mm depth range. The objective of this research program is to calibrate the Canadian code shear equations to precast/prestressed hollow-core slabs, through testing a series of …

    manitoba Repository record for Shear capacity of dry-cast extruded precast/prestressed hollow-core slabs (opens in a new tab)

  11. Centrifuge modelling of high shear capacity ribbed piles in stiff clay

    … ahead of their competitors. The idea of the High Shear Capacity Ribbed Pile, whereby the construction of ribs along the length of the pile shaft might significantly increase the shaft capacity, has been considered by contractors in the past. Various tools with which to construct these ribs, using …

    city-london Download PDF for Centrifuge modelling of high shear capacity ribbed piles in stiff clay (opens in a new tab)

  12. Tests and definition of maximum shear capacity of reinforced concrete structures

    Study of maximum shear strength of concrete structures, such as corbels, deep beams, dapped ends and wall beams, which are subjected to predominant shear forces.

    concordia Download PDF for Tests and definition of maximum shear capacity of reinforced concrete structures (opens in a new tab)

  13. Predicting residual shear capacity of reinforced concrete beams using machine learning approach

    … the various failure mechanisms in RC structures, shear failures are particularly dangerous due to their brittle nature and are the focus of this study. Thus, accurately assessing the residual shear capacity (RSC) of RC beams is essential for structural safety and informed maintenance …

    texas Repository record for Predicting residual shear capacity of reinforced concrete beams using machine learning approach (opens in a new tab)

  14. Variation In Web-Shear Capacity of Hollow-Core Slabs With Filled Cores

    The web-shear capacity of hollow-core slabs both with and without concrete or grout core-fill material, as well as slabs that were cast with a solid extruded core (i.e., with one of the voids omitted), was experimentally investigated using two different hollow-core slab geometries to evaluate how …

    umn Repository record for Variation In Web-Shear Capacity of Hollow-Core Slabs With Filled Cores (opens in a new tab)

  15. Investigating shear capacity of RC beam-column joints using artificial intelligence techniques

    … by different mechanisms such as flexure, shear, and bond stress between the reinforcement and the concrete. Shear transfer mechanisms through the joint are one of the most important factors affecting the joint performance. Shear failure occurring in the joint can lead to severe damage and …

    unlv Repository record for Investigating shear capacity of RC beam-column joints using artificial intelligence techniques (opens in a new tab) Download PDF for Investigating shear capacity of RC beam-column joints using artificial intelligence techniques (opens in a new tab)

Page 1 of 15