Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"Shear Friction"”.
-
Performance of GFRP headed-end bars as interface shear friction reinforcement
… concrete (RC) structures rely on the transfer of shear forces across concrete interfaces, particularly in composite systems. A prime example is in bridge construction, where shear transfer between prestressed precast girder and cast-in-place slab is vital for composite action. While the interface …
-
Shear and shear friction of ultra-high performance concrete bridge girders
… Due to the lack of reinforcing bars, all shear forces in UHPC girders have to be carried by the concrete and steel fibers. Current U.S. codes do not consider fiber reinforcement in calculating shear capacity. Fiber contribution must be accurately accounted for in shear equations in order …
-
Quantifying the compressive ductility of concrete in RC members through shear friction mechanics.
… in RC members has been quantified through shear friction mechanics. Firstly, the size dependent stress‐strain models for unconfined and actively confined concrete are derived based on the fundamental mechanics of shear friction theory. At this stage, the shear friction properties, that is …
-
Two-Direction Cracking Shear-Friction Membrane Model for Finite Elment Analysis of Reinforced concrete
… cracked reinforced concrete that provide reduced shear stiffness but do not limit shear strength. In addition typical models are not based on the actual physical behavior of shear transfer across cracks by shear friction recognized in the ACI Building Code and present in previous experimental …
-
Impact of Retarder-Induced Roughness on Shear Friction Capacity using Conventional and High-Strength Reinforcement
Shear friction is used to transfer shear forces between two reinforced concrete members or two members with dissimilar materials. Shear transfer across a plane represents a complex phenomenon that depends on the interactions between several variables, such as concrete surface condition and …
-
The discrete rigid body rotation of reinforced concrete beams using partial interaction and shear friction theory.
… chapter. In Chapter 1, the peripheral areas of shear friction theory, partial interaction theory and rigid body displacement are combined to quantify the moment-rotation response of any reinforced concrete member. It is discussed how partial interaction theory is used to model the behaviour of …
-
Axial shear friction of pipe-soil systems: investigation for multi-size granular soils using a novel large-scale apparatus
It is well recognized that the axial pipe-soil shear friction is an essential controlling parameter<br/>in the prediction of subsea on-bottom pipeline behaviour. This PhD thesis presents the design,<br/>assembly and application of a novel large-scale shear test apparatus to address some of …
-
Fatigue behavior and structural stress analysis of coach-peel and lap-shear friction stir welded joints of AZ31 magnesium alloy
… work the fatigue behavior of coach-peel and lap-shear friction stir linear welded joints of AZ31 magnesium alloy sheet were evaluated under different loads and the results were compared using structural stress analysis. Lap-shear coupons of 30 mm in width were obtained from a welded overlap …
-
Effect of fiber characteristics on cohesive and physical properties of cotton/polyester blended open-end yarns
… extension, and uncrimping toughness. Interfiber friction on carded laps was measured using an oscillating shear friction tester. The cohesive properties of first and fourth drawn slivers were determined by the Rotchild Cohesion Meter. The tensile properties of yarns such as tenacity, breaking …
-
An empirical approach to simulate the concrete softening mechanism.
… An alternative approach is required. Recently, shear friction theory has been used to simulate the softening behavior of concrete. Shear friction theory quantifies the relationship between the shear stress, normal stress, displacement and separation of the softening concrete in relation to the …
-
Finite Element Analysis of Dapped-Ended Concrete Girders Reinforced with Steel Headed Studs
… decrease in cross sectional area, significant shear strength in the member is lost and the introduction of a re-entrant corner makes the girder prone to shear cracking. Careful shear reinforcement must therefore be provided at the re-entrant corner. Using headed studs in place of conventional …
-
Behaviour of headed stud connections for precast concrete panels under monotonic and cycled shear loading
… are briefly reviewed. It is postulated that shear loads are transmitted via a connection to the surrounding concrete by three distinct mechanisms: 1. friction between faceplate and concrete 2. bearing of end of faceplate on concrete 3. interaction between studs and concrete Tests on …
-
A generic mechanics approach for predicting shear strength of reinforced concrete beams.
… segmental approach is developed for simulating shear behaviour of reinforced concrete (RC) beams. Using the well-established theories of partial interaction and shear friction, the generic mechanics approach simulates the formation and widening of diagonal cracks and shear sliding failure for RC …
-
Mechanics-based approaches for the flexural and shear behaviour of ultra-high performance fibre reinforced concrete beams
… analysis approach for the flexural and shear behaviour of ultra-high performance fibre reinforced concrete beams. These solutions apply the mechanical principles of partial interaction, shear friction and segmental analysis to the design of fibre reinforced concrete (FRC) and ultra-high …
-
Behavior of the cast-in-place splice regions of spliced I-girder bridges
… of both test girders were characterized by a shear-compression failure of the web concrete with primary crushing occurring in the vicinity of the top post-tensioning duct. Most significantly, the girders acted essentially as monolithic members in shear at failure. Web crushing extended across …
-
Construction and Behavior of Precast Bridge Deck Panel Systems
… of transverse joints, different types of shear connectors, and different shear pocket spacings. The bridge consisted of two AASHTO type II girders, 40 ft long and simply supported, and five precast bridge deck panels. Two of the transverse joints were epoxied male-female joints and the …
-
SHEAR TRANSFER STRENGTH IN HIGH STRENGTH CONCRETE
The shear transfer problem across a plane in high strength concrete (HSC) has been investigated both analytically and experimentally. A total of 28 push-off specimens, 14 uncracked and 14 pre-cracked, made of concrete with cylinder compressive strength ranging from 72 MPa to 107 MPa were tested. …
-
A generic segmental analysis of all types of RC members.
… which encases it, and, using the mechanics of shear-friction theory, the approach simulates the formation and failure of concrete softening wedges. Moreover, being mechanics based, the M/θ approach can in theory be applied to any type of member, that is any cross section, with any concrete …
-
Pressure Fluctuations in a High-Reynolds-Number Turbulent Boundary Layer over Rough Surfaces of Different Configurations
… addition, it was proven that the high frequency shear friction velocity scaling of Meyers et al. (2015) is universal to rough surfaces of different element shape and density. Physical insights into the shear friction velocity, on which this scaling is based, have been revealed. This includes an …
Page 1 of 3