Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"Shear History"”.

  1. Interactions Between Portland Cements and Carboxylated and Naphthalene-Based Superplasticizers

    … paste to be dispersed. The differences in the shear history between the concretes and the pastes possibly explain such discrepancies in admixture dosages.

    uiuc Repository record for Interactions Between Portland Cements and Carboxylated and Naphthalene-Based Superplasticizers (opens in a new tab)

  2. An Experimental Study of Conformance Treatments Using Crosslinked Polyacrylamide Polymer

    … of the reaction temperature. The applied shear field and shear history both affect the rate of gelation. The gelation time decreases with the increasing shear rate and the higher rate of in-situ gelation reaction can be attributed the shear field imposed on the gelling solution during the …

    texas Repository record for An Experimental Study of Conformance Treatments Using Crosslinked Polyacrylamide Polymer (opens in a new tab) Restricted access

  3. Rheology and Microstructure of Concentrated Suspensions of Plate-Shaped Colloidal Particles

    … equal to 8. These suspensions demonstrate shear thickening at $\phi \ge$ 0.50 and also have a shear history dependent elastic modulus, G$\sp\prime.$ In the shear thinning region G$\sp\prime$ decreases with increasing shear rate. In the shear thickening region the modulus increases rapidly. …

    uiuc Repository record for Rheology and Microstructure of Concentrated Suspensions of Plate-Shaped Colloidal Particles (opens in a new tab)

  4. Shear thickening and microstructures of concentrated charge stabilized suspensions

    … properties and microstructures as function of shear rates is constructed for the first time. A parameter to measure the degree of suspension order under shear is established. The rapid increase of suspension viscosity as the shear rate increases is examined as function of volume fraction, …

    uiuc Repository record for Shear thickening and microstructures of concentrated charge stabilized suspensions (opens in a new tab)

  5. Shear behavior and microstructures of confined colloidal suspensions

    … electrostatic potential. Stress versus shear rate behavior is examined as a function of particle volume fraction, gap size, and shear history. Microstructures for systems at equilibrium and under shear are investigated by direct observation of particle configurations and by scattering …

    uiuc Repository record for Shear behavior and microstructures of confined colloidal suspensions (opens in a new tab)

  6. Integrated prediction of processing and thermomechanical behavior of long fiber thermoplastic composites

    … from Moldflow, was developed to characterize the shear history of the material during processing. Quantitative information about the influence of the imposed shear history on the fiber attrition was obtained by Couette flow experiments. Based on that information, prediction of fiber breakage along …

    minho-thes Repository record for Integrated prediction of processing and thermomechanical behavior of long fiber thermoplastic composites (opens in a new tab)

  7. Yielding and structure under flow of gels and glasses of rod-like colloids

    … rods. Thesecond part compares the role of pre-shear history on the linear rheological response ofsemi-dilute suspensions of attractive silica sphere and rod suspensions. Third part investigatesthe yielding response of a dense suspension of repulsive silica rods. Fourth andlast part examines the …

    greece Repository record for Yielding and structure under flow of gels and glasses of rod-like colloids (opens in a new tab)

  8. Ρεολογία και ευστάθεια πυκνών αιωρημάτων λιγνίτη - νερού

    … of flow tests were performed with respect to preshear times and stress levels, in a wide range of shear rates (from 10-3s-1 to 102s-1). The viscosity curves corresponding to the descending and ascending parts of the flow curve were found to be different; these parts can be described either by …

    greece Repository record for Ρεολογία και ευστάθεια πυκνών αιωρημάτων λιγνίτη - νερού (opens in a new tab)

  9. Rheological behavior of silica based suspensions for shear thickening applications

    … focuses on the fabrication and optimization of shear thickening fluids (STFs) for impact protection applications. STFs were prepared by dispersion of fumed silica nanoparticles (NPs) in a polyethylene glycol (PEG) medium. In order to fully understand the shear thickening behavior, the …

    ubc Repository record for Rheological behavior of silica based suspensions for shear thickening applications (opens in a new tab) Download PDF for Rheological behavior of silica based suspensions for shear thickening applications (opens in a new tab)

  10. Formulation and Evaluation of Quetiapine Fumarate Tablets using Twin Screw Melt Granulation

    … process with controlled temperature and shear history. Industry estimates that more than 50% of active pharmaceutical ingredients fall under the biopharmaceutical classification system II i.e., BCS class II, which is characterized as a group of poorly water-soluble compounds that produce …

    mississippi Repository record for Formulation and Evaluation of Quetiapine Fumarate Tablets using Twin Screw Melt Granulation (opens in a new tab)

  11. JOINT MICROFLUIDIC ASSESSMENT OF LOCAL SHEAR AND SHEAR HISTORICAL EFFECTS ON THROMBOSIS: APPLICATIONS TO HEART-ASSIST DEVICES AND HYPERINFLAMMATORY STATES

    … feature of heart-assist devices is elevated shear rates throughout the flow circuit. Blood components rely on deviations from physiological shear to sense bleedings events and trigger thrombosis. As a result, thrombotic complications are common in patients with circulatory support devices, …

    cornell Repository record for JOINT MICROFLUIDIC ASSESSMENT OF LOCAL SHEAR AND SHEAR HISTORICAL EFFECTS ON THROMBOSIS: APPLICATIONS TO HEART-ASSIST DEVICES AND HYPERINFLAMMATORY STATES (opens in a new tab)

  12. Microfluidic Focal Injury Models of Thrombosis and Hemostasis

    … with maximum accumulation at an average wall shear rate of 400 1/sec, with engagement of alpha2beta1 integrin a mandatory factor due to complete loss of adhesion in blood from a knockout animal. It was found that PAR4 stimulation of pre-formed thrombi increased aggregate stability by 50%. …

    penn Repository record for Microfluidic Focal Injury Models of Thrombosis and Hemostasis (opens in a new tab)

  13. Rheology and microrheology at high pressures

    … and used to measure linear viscoelasticity. HP-shear rheology was also used for flow curves. When needed, complementary structural characterization was performed through spectroscopy techniques and rheo – small angle scattering (SAS), i.e., light and x-ray. In organoclay dispersions (Ch. 3,4 and …

    greece Repository record for Rheology and microrheology at high pressures (opens in a new tab)

  14. Experimental Investigation of the Flow Dynamics in a Model of an Abdominal Aortic Aneurysm

    … residence time of particles inside the AAA, and shear history of particles during their movement. Proper orthogonal decomposition and Dynamic mode decomposition have been applied to the flow in both planes to reveal the hidden dynamics and the coherent structures of the flow behavior inside the …

    concordia Download PDF for Experimental Investigation of the Flow Dynamics in a Model of an Abdominal Aortic Aneurysm (opens in a new tab)

  15. Rheology of low to medium consistency pulp fibre suspensions

    … yield stress. Pulp suspensions were found to be shear-thinning up to a certain high shear rate. The Herschel–Bulkley constitutive equation was used to fit the local steady-state velocity profiles and to predict the steady-state flow curves obtained by conventional rheometry. Conventional …

    ubc Repository record for Rheology of low to medium consistency pulp fibre suspensions (opens in a new tab) Download PDF for Rheology of low to medium consistency pulp fibre suspensions (opens in a new tab)

  16. Experimental Study and Surface Deposition Modelling of Amended Oil Sands Tailings Products

    … showed that while flocs break down under high shear, flocs reform at lower shear rates. Breakdown and recovery of flocs was confirmed by measuring the shear modulus under dynamic loading and a set of microstructural analysis. Moreover, it was shown that the tailings manifest viscosity …

    carleton Repository record for Experimental Study and Surface Deposition Modelling of Amended Oil Sands Tailings Products (opens in a new tab)

  17. The effect of extensional flow on shear viscosity

    Shear rheology is conventionally studied under pure shearing flows, rather than more realistic mixed flows. Moving parallel surfaces and capillary rheometery are examples of the former, whilst the latter occurs whenever a flow accelerates or decelerates creating an additional component of …

    whiterose Download PDF for The effect of extensional flow on shear viscosity (opens in a new tab)

  18. Two-Dimensional Transient Flows and Stability of Concentrated Suspensions of Clay Particles and Rheology

    … using a state-of-the-art rheometer show that the shear history of concentrated suspensions of clay particles can be divided into three regions: solid-rigid, nearly Newtonian, and shear-thinning regions. The nearly Newtonian region is very narrow in shear rate compared to the shear thinning region. …

    uiuc Repository record for Two-Dimensional Transient Flows and Stability of Concentrated Suspensions of Clay Particles and Rheology (opens in a new tab)

  19. Organic Fillers in Phenol-Formaldehyde Wood Adhesives

    … the adhesive formulations as a function of shear history, filler type, and filler particle size. Relative to alder bark and walnut shell, the unique behavior of corn cob residue was discussed with respect to chemical composition. Alder bark and walnut shell exhibited similar effects with a …

    vt Repository record for Organic Fillers in Phenol-Formaldehyde Wood Adhesives (opens in a new tab)

Page 1 of 2