Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 359 for “"Shear Test"”.

  1. Web shear test for rock

    Includes bibliographical references (page 64).

    colo-mines Repository record for Web shear test for rock (opens in a new tab)

  2. Constant volume ring shear test for sand.

    A ring shear device was designed to permit constant volume tests to be performed on granular materials. Constant volume ring shear tests can be used to simulate undrained conditions of shearing. The very large deformations allowed by the ring shear device are well suited to determine the …

    ottawa-retro Repository record for Constant volume ring shear test for sand. (opens in a new tab)

  3. Analysis of shear test methods for composite laminates

    … of the stress distributions in four flat test specimens for in-plane shear response of composite materials subjected to mechanical or thermal loads is presented. The shear test specimens investigated include: slotted coupon, cross beam, Iosipescu, and rail shear. Results are presented in …

    vt Repository record for Analysis of shear test methods for composite laminates (opens in a new tab)

  4. A New Shear Test Method for Mortar Bed Joints

    From a review of existing test methods devised to determine the shear strength of a mortar joint, it was concluded that among the existing methods, the triplet test is the simplest to perform and the Hofmann & Stöckl test provides the best results in terms of uniform stresses. The advantages of …

    calgary Repository record for A New Shear Test Method for Mortar Bed Joints (opens in a new tab)

  5. Automation and further development of the borehole shear test

    … was to automate and further develop the borehole shear test (BST). The description of the successful automation procedure is presented, and investigations into soil displacement and cyclic BST loading are described. Displacement and cyclic loading investigations were performed with additional …

    iastate Repository record for Automation and further development of the borehole shear test (opens in a new tab)

  6. Crystal plasticity modeling of simple shear test of single crystals

    … beyond diffuse necking in conventional tensile tests. This thesis builds upon a recently developed experimental methodology which enables extraction of stress-strain response of single crystals beyond diffuse necking in tensile tests from in-situ simple shear tests. This work uses this existing …

    ubc Repository record for Crystal plasticity modeling of simple shear test of single crystals (opens in a new tab) Download PDF for Crystal plasticity modeling of simple shear test of single crystals (opens in a new tab)

  7. New in-plane and interlaminar shear test methods for fiber reinforced composites

    … new compact double-notched specimen for in-plane shear testing of isotropic, anisotropic and composite materials was developed. A preliminary test of the specimen was performed on a cross-ply laminate. High sensitivity moire interferometry was used to determine the shear and normal strains on the …

    vt Repository record for New in-plane and interlaminar shear test methods for fiber reinforced composites (opens in a new tab)

  8. A study of tension, compression, and shear test methods for advanced composites

    A study of the literature pertaining to test methods for advanced composite materials has been carried out. Several test methods were discussed and compared for each of three areas of interest. These areas were uniaxial tension, uniaxial compression and in-plane shear. Test methods were selected …

    vt Repository record for A study of tension, compression, and shear test methods for advanced composites (opens in a new tab)

  9. Investigating Simple Shear Mechanics of Bovine Cartilage Using a Triaxial Shear Test Machine

    … in this thesis is to perform triaxial mechanical tests on articular cartilage that are quasi-static and large-shear strains, in order to understand tissue mechanical behavior. Methods: Cartilage explants were taken from three healthy adult bovine femurs. Specimens were categorized by joint contact …

    uconn-diss Repository record for Investigating Simple Shear Mechanics of Bovine Cartilage Using a Triaxial Shear Test Machine (opens in a new tab)

  10. An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials

    … properties of composite materials under shear loading are difficult to determine. The Iosipescu Shear test, originally proposed for metals, has in recent years been applied to composites. It has the advantages of small specimen size, simple loading and a reasonably uniform shear stress in …

    odu Repository record for An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials (opens in a new tab)

  11. An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials

    … properties of composite materials under shear loading are difficult to determine. The Iosipescu Shear test, originally proposed for metals, has in recent years been applied to composites. It has the advantages of small specimen size, simple loading and a reasonably uniform shear stress in …

    odu Repository record for An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials (opens in a new tab)

  12. Stress-Strain Behavior of Saturated Clays from Vane Shear Test Results: a Numerical Approach

    The vane shear test (VST) is widely used to estimate the undrained shear strength of soft cohesive soils; however, it does not directly provide constitutive information such as the stress–strain response. Smoothed Particle Hydrodynamics (SPH), a mesh-free numerical method, offers an attractive …

    bucknell Repository record for Stress-Strain Behavior of Saturated Clays from Vane Shear Test Results: a Numerical Approach (opens in a new tab)

  13. Extending the annular in-plane torsional shear test specimen to applications at high strain rates

    The in-plane torsion test is a well-established test used for the characterisation of sheet metals. The specimen is intended to deform in planar simple shear and is designed to be machined with a continuous annular shear zone. As a result, there are no “edge effects” or geometric discontinuities to …

    cape-town Repository record for Extending the annular in-plane torsional shear test specimen to applications at high strain rates (opens in a new tab)

  14. Evaluation of the MD shear test method as a criterion for predicting box compressive strength

    … rigidities of the panel and its transverse shear rigidities. McKinlay proposed a new method to measure the MD transverse shear stiffness of corrugated board. This research was aimed at designing a fixture to perform the MD shear test and to evaluate its performance. In addition, the …

    cape-town Repository record for Evaluation of the MD shear test method as a criterion for predicting box compressive strength (opens in a new tab)

  15. A modified ring shear test device for determining the hydro-mechanical behaviour of unsaturated soils

    … the design details of an automated modified ring shear apparatus for the testing of unsaturated soils using the axis translation technique. The system is fully automated and it can be used for conducting Constant Load and constant Suction (CLS) shear tests, Constant Volume and constant Suction …

    ottawa-retro Repository record for A modified ring shear test device for determining the hydro-mechanical behaviour of unsaturated soils (opens in a new tab)

  16. Experimental and numerical study of the rod shear test for determining steel-sand interface behavior

    … the unit side resistance of piles is the rod shear test. In a rod shear test a model pile is placed inside a cylindrical soil specimen. A confining pressure is then placed around the specimen/pile assembly and the model pile axially loaded. In some cases rod shear tests in sands have produced …

    arizona-thes Repository record for Experimental and numerical study of the rod shear test for determining steel-sand interface behavior (opens in a new tab)

  17. PWP Tester - A simplified cyclic shear test for pore water pressure evolution in granular soils

    … coarse-grained soils when subjected to external shear loading (monotonic or cyclic) under prevented water drainage. When the amount of the excess PWP reaches the value of the total stress, the grain structure collapses and the shear strength and stiffness of the soil disappear - the soil behaves …

    qucosa-diss

  18. Evaluation of the Shear Punching Test - A comparative analysis with fall-cone and direct simple shear test

    … developed a new method to assess the undrained shear strength in cohesive soils. The new test, named the shear punching test, is developed to possibly replace or compliment existing test methods, particularly the fall-cone test. The fall-cone test, which is an index test for evaluating the shear …

    chalmers Repository record for Evaluation of the Shear Punching Test - A comparative analysis with fall-cone and direct simple shear test (opens in a new tab)

  19. Rolling Shear Strength and Modulus for Various Southeastern US Wood Species using the Two-Plate Shear Test

    … CLT material properties, especially rolling shear, would need to be explored. The increasing demand for softwood lumber, along with the increase of demand of CLT panel production, could place a burden and surpass the domestic softwood supply. Rolling shear is a phenomenon that occurs when the …

    vt Repository record for Rolling Shear Strength and Modulus for Various Southeastern US Wood Species using the Two-Plate Shear Test (opens in a new tab)

Page 1 of 18