Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 226 for “"Shear bands"”.

  1. Dynamic interaction between shear bands

    A shear band of finite length, formed inside a ductile material at a certain stage of a continued homogeneous strain, provides a dynamic perturbation to an incident wave field, which strongly influences the dynamics of the material and affects its path to failure. The investigation of this …

    trento Repository record for Dynamic interaction between shear bands (opens in a new tab)

  2. Dynamic Shear Bands in Metals under High Strain Rates

    Adiabatic shear bands have been observed for a long time to occur under different conditions in many applications. Analysis of these localizations highly depends on the selection of the constitutive model. Hence, two constitutive models that take temperature and strain rate effect into account are …

    lsu-thes Repository record for Dynamic Shear Bands in Metals under High Strain Rates (opens in a new tab)

  3. Microstructural evolution of adiabatic shear bands in steel by impact

    … dislocation source with the direction of maximum shear (regions of stress concentrations) within the specimens during impact, is a necessary condition for the points of intersection to act as possible sites for the nucleation and initiation of ASB depending on the rate of dislocation generation, …

    manitoba Repository record for Microstructural evolution of adiabatic shear bands in steel by impact (opens in a new tab)

  4. Cracks, Shear Bands and Lamellar Inclusions in Homogeneously Prestressed Materials

    … inclusion boundaries. In order to investigate shear bands nucleation, propagation and interaction with a second phase or a defect, analytical solutions for an infinite nonlinear elastic solid subject to a uniform far–field deformation increment are obtained for the following types of …

    trento Repository record for Cracks, Shear Bands and Lamellar Inclusions in Homogeneously Prestressed Materials (opens in a new tab)

  5. Finite Element Analysis of Adiabatic Shear Bands in Impact and Penetration Problems

    … of this work is to ascertain when and where a shear band, defined as a narrow region of rapid, intense plastic deformation, forms in each material subject to impact loading. The Taylor impact simulations show that shear bands form earlier in WHA than in DU for the material parameters used. In …

    vt Repository record for Finite Element Analysis of Adiabatic Shear Bands in Impact and Penetration Problems (opens in a new tab)

  6. Numerical Simulation of Adiabatic Shear Bands and Crack Propagation in Thermoviscoplastic Materials

    … The formation and propagation of an adiabatic shear band (ASB) inplane strain tensile deformations is studied for eleven materials. The ASB is assumed to form when the maximum shear stress has been reduced to 80% of its peak value at a point and it is deforming plastically. The materials are …

    vt Repository record for Numerical Simulation of Adiabatic Shear Bands and Crack Propagation in Thermoviscoplastic Materials (opens in a new tab)

  7. Effect of heat treatment on stability of adiabatic shear bands in 4340 steel

    … high strain rates is the formation of adiabatic shear bands. Adiabatic shear bands lead to unexpected failure of materials during service. This study investigated the possibility of eliminating adiabatic shear bands from materials subjected to severe deformation at high strain rates by post …

    manitoba Repository record for Effect of heat treatment on stability of adiabatic shear bands in 4340 steel (opens in a new tab)

  8. Local rearrangement and micromechanical comparisons between shear bands and simple shear in granular materials

    … interest. We compare an experimentally generated shear band in a granular material (Ottawa sand) and a discrete element simulation of a granular material under simple shear from the lens of local rearrangements. Experiments utilizing sophisticated imaging capabilities in geomechanics have enabled …

    jhu Repository record for Local rearrangement and micromechanical comparisons between shear bands and simple shear in granular materials (opens in a new tab)

  9. Extension of a finite element model to 2D for the prediction of adiabatic shear bands

    … to occur through the formation of adiabatic shear bands (ASBs). ASBs appear in materials as evidence of damage, and are known to be sites for material failure. General purpose plasticity models fail to predict the phenomenon of ASB formation. The present research validates and extends a model …

    manitoba Repository record for Extension of a finite element model to 2D for the prediction of adiabatic shear bands (opens in a new tab)

  10. Prediction of the formation of adiabatic shear bands in high strength low alloy 4340 steel through analysis of grains and grain deformation

    … in the formation of localized zones of severe shear strain known as adiabatic shear bands (ASBs), which are a precursor to shear failure. The formation of ASBs in a high-strength low alloy steel, namely AISI 4340, was examined based on prior heat treatments (using different austenization and …

    manitoba Repository record for Prediction of the formation of adiabatic shear bands in high strength low alloy 4340 steel through analysis of grains and grain deformation (opens in a new tab)

  11. High bandwidth cutting force measurement during the cutting of aa 7075-t6 and its application to measure the evolution of flow stress within developing shear bands

    Shear banding is an unstable mode of deformation and failure, caused by material beginning to soften or weaken with additional strain, resulting in narrow bands of highly deformed material called shear bands. Shear bands occur in metal cutting when material deformation in the primary shear zone is …

    wichita-thes Repository record for High bandwidth cutting force measurement during the cutting of aa 7075-t6 and its application to measure the evolution of flow stress within developing shear bands (opens in a new tab)

  12. KINEMATIC SIGNIFICANCE OF MYLONITIC FOLIATION (METAMORPHIC).

    … consistently discordant to the margins of the shear zones. Finite-strain analyses show that the foliation surfaces in each zone are consistently oriented parallel to the XY-plane of the finite strain ellipsoid. The shear bands within the mylonites (C-surfaces, C'-surfaces, extensional …

    arizona-thes Repository record for KINEMATIC SIGNIFICANCE OF MYLONITIC FOLIATION (METAMORPHIC). (opens in a new tab)

  13. Plastic Deformation and Annealing of Zr- and Cu- Based Bulk Metallic Glasses

    … the nucleation and propagation of defects called shear bands, which cause strain softening.</p> <p>This strain softening can be recovered after annealing, i.e., annealing makes the plastically strained metallic glasses harder, in sharp contrast to the annealing-induced softening typically observed …

    utk-theses Repository record for Plastic Deformation and Annealing of Zr- and Cu- Based Bulk Metallic Glasses (opens in a new tab)

Page 1 of 12