Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 225 for “"Shear bond"”.
-
Shear Bond Strength Comparison of Bioceramics to Root Dentin.
… purpose of this study is to compare the push-out bond strength of four bioceramic materials to root dentin that are used during regenerative endodontics. The bioceramics being tested are: 1. Biodentine®(Septodont); 2. EndoSequence BC Putty Fast Set® (Brasseler); 3. NeoPutty® (Avalon Biomed); and …
-
Shear bond strengths of two new self-etching primers
Purpose: To evaluate the in vitro shear bond strength (SBS) of orthodontic attachments using 2 self-etching primers (SEP): iBOND and G-Bond. Methods: 180 molars were randomly divided into 12 groups. Teeth were bonded with a stainless steel button using Transbond XT composite. The bonding agents …
-
Shear-bond slip criteria for composite steel deck slabs
… surfaces in composite steel slabs, pertaining to shear-bond capacity and the ultimate shear strength of deck slabs, invites consideration of slip behavior along the length of slab specimens. In particular, slip behavior within the shear-span (see Figure 1.3) of short to medium span specimens, …
-
Improvement of shear-bond in composite steel and concrete floor slabs
<p>This research project studies the horizontal shear-bond between profiled steel sheeting and concrete when used together to form composite floor slabs. After reviewing the existing literature, aspects of the behaviour of such slabs have been studied in different ways. Firstly, a computer …
-
Shear bond strength of rebonded orthodontic attachments using self-etching primers
… were to evaluate the difference in SBS of bonding and rebonding orthodontic attachments when using a CEP compared to a SEP and to evaluate if re-etching is necessary prior to rebonding with either a CEP or a SEP. Orthodontic metal buttons were bonded to extracted human molars according to 4 …
-
Shear bond strength of different cements to printed resins and zirconia
OBJECTIVES: This in-vitro study aimed to measure bonding of multi and single step cements to printed resins and Layzir zirconia. Evaluate the effect of different material combinations on shear bond strength, and to evaluate the effect of thermocycling on shear bond strength of different materials …
-
Experimental Evaluation and Analytical Modeling of Shear Bond in Composite Slabs
… behavior of composite slabs are governed by the shear interaction between the concrete and the steel deck. The interaction property depends on several factors and it is not possible to express the relationship from a purely analytical basis. As such, analysis and design methods available today …
-
Comparison of Laser and Phosphoric Acid Etching on Sealant Shear Bond Strength
… with Er,Cr:YSGG laser enamel etching on the shear bond strength of sealant material. METHODS: Extracted healthy third molars were mounted in acrylic exposing the flattest surface available. Three groups of twenty teeth were used to evaluate traditional acid etching with 37% phosphoric acid as …
-
Evaluation of Shear Bond Strength of Two Resin-Modified Glass-Ionomer Cements
Purpose: To compare the in-vitro shear bond strengths of a new paste-paste formulation of resin-modified glass-ionomer cement (Rm-GIC) to an exising powder-liquid formulation. The study will test the hypothesis that the new paste-paste formulation of Rm-GIC (Fuji-Cem ™, GC Corp, Tokyo, Japan) has …
-
A novel bioactive glass-enhanced orthodontic bonding resin: A shear bond strength study
… The purpose of this study was to determine the shear bond strength of four different compositions of orthodontic resin prepared with bioactive glass (N=20). Premolars were bonded using one of four BAG-BOND compositions. Brackets were debonded and ARI scores were given. The mean shear bond …
-
Shear Bond Strengths of One and Two-Step Bonding Techniques on Extracted Teeth
The purpose of this research is compare shear bond strengths using two different self-etching methods and a conventional two step method (control) on brackets bonded to extracted human premolars five minutes and twenty-four hours after light curing. These three products will be compared in shear …
-
Shear Bond Strengths of Metal and Ceramic Brackets Bonded to Contemporary Porcelain Surfaces
… As a result, there arises a concern for direct-bonding techniques to porcelain restorations. Ideal adhesion to a porcelain surface should allow orthodontic treatment without bond failure, but not significantly alter porcelain integrity after debonding. Various studies have investigated …
-
Comparison of Shear Bond Strength and Morphology of New and Rebonded Ceramic Brackets
Objectives: 1) to evaluate the shear bond strength of Symetri Clear and Radiance Plus ceramic brackets, new and rebonded following different bracket base conditioning procedures; and 2) to determine bond failure mode and bracket base morphology. Materials & Methods: This ex-vivo randomized …
-
An Analysis of Adhesion Promoters on Shear Bond Strength of Orthodontic Brackets to Teeth
Purpose:The aim of this study was to evaluate the shear bond strength of two adhesion promoters, EnhancetmLC and AssureRUniversal Bonding Resin, and their effects with two different adhesion systems (Light Bondtmand TransbondtmXT). To better understand their behavior upon failure, the amount of …
-
Effect of tooth bleaching on the shear bond strength of a fluoride-releasing sealant
… an in-office plus at-home bleaching protocol on shear bond strength of orthodontic buttons when using a fluoride-releasing sealant. Methods and Materials: One hundred and sixty extracted human molars were randomly divided into bleached (N=80) and unbleached groups (N=80). The bleached group was …
Page 1 of 12