Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 50 for “"Shear-dominated"”.
-
Effect of confinement on shear dominated reinforced concrete elements
… to the transverse reinforcement on enhancing the shear performance of RC members. A new constitutive model of RC members was proposed by extending the Modified Compression Field Theory (MCFT) to incorporate the effect of confinement due to transverse reinforcement by adjusting the peak stress and …
-
Shear-Dominated Bending Behavior of Carbon/Epoxy Composite Lattice IsoBeam Structures
… carbon/epoxy were manufactured and tested in shear-dominated bending. The manufacturing process consisted of placing tows of carbon fiber pre-impregnated with epoxy resin onto a pin-type mandrel to create members with interwoven joints. The members were consolidated with a half spiral aramid …
-
Kinematic and thermochronologic studies of Cordilleran metamorphic complexes (Pioneer, Idaho; North Cascades, Washington)
… the relative contributions of pure and simple shear strain in the ~100 m thick quartzite-dominated detachment shear zone, using quartz microstructures (quartz ribbons and recrystallized grains) and crystallographic preferred orientation (measured by electron backscatter diffraction) as well as …
-
Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading
… (R/C) structural walls that are susceptible to shear failure after flexural yielding. The investigation was divided into an experimental and an analytical phase. There were three main objectives in the experimental phase: to study the potential discrepancies between static and dynamic wall …
-
Ductile Fracture under Combined Tension and Shear: Theory and Applications
… impact. In particular, ductile failure under shear-dominated loading pervades in many areas of manufacturing, load-bearing structures and impact protection systems. However, failure in shear remain elusive there being no complete theory of ductile fracture without a physics-based model. A …
-
Concrete Shear Walls Retrofit by Weakening Through Vertical Cuts and Self-Centering
… retrofit of poorly detailed reinforced concrete shear walls by weakening them through vertical and/or horizontal cuts and by adding self-centering through unbonded post-tensioning. Weakening is used to shift failure from brittle to ductile modes. Unbonded post-tensioning is used to reduce …
-
Finite Opening of Propagating Shear Cracks
Molecular Dynamics (MD) simulations of shear-dominated crack propagation by Abraham and Gao (2000) showed that there was finite crack opening when the crack propagated at a sub-Rayleigh speed while the crack opening became negligible when the crack propagated faster than the shear wave speed. On …
-
Development of Novel Computational Simulation Tools to Capture the Hysteretic Response and Failure of Reinforced Concrete Structures under Seismic Loads
… non-associative flow rule to capture compression-dominated response, is combined with a rotating smeared-crack model to capture the damage associated with tensile cracking. The proposed model resolves issues which characterize existing concrete material laws. Specifically, the newly proposed …
-
Microfluidics for assessing the behaviour of deformable biological objects
… red blood cells suspensions were investigated in shear-dominated and extension-dominated flows and the performance of the optimised flow geometries for the study of such biological fluids was demonstrated.
-
Dynamics and parameterization of stably stratified turbulence: implications for estimates of mixing in geophysical flows
… length scales of overturns in stably-stratified shear-flow turbulence and the fundamental length scales constructed from dimensional analysis of basic physical quantities. In geophysical flows such as the ocean, overturns are relatively easy to observe while the basic quantities are not. As such, …
-
COMPUTATIONAL SIMULATION OF SCRAMJET COMBUSTORS - A COMPARISON BETWEEN QUASI-ONE DIMENSIONAL AND 2-D NUMERICAL SIMULATIONS
… wave (i.e. shock waves and expansion waves) and shear dominated viscous flow simulation, 1-D model severely fails to predict the trend followed by the experimental result along the centerline of the combustor. However, the 1-D model is able to match the overall flow velocity achieved within the …
-
Investigation of a hybrid bridge girder with reinforced concrete web and steel flanges
… to the top and bottom using steel headed shear studs. This system is known under its commercial name as "COMPO-GIRDER.™" The research program was divided in two phases. In Phase I, 20 half-scale elements were tested under shear dominated loading in a special element tester (Adebar, 1991). …
-
On the ductile failure of thin-walled aluminum alloy tubes under combined shear and tension
… extent to which materials can be deformed under shear-dominant loadings. Custom Al-6061-T6 tubular specimens are loaded under radial and corner paths of tension and shear to failure. During the experiments, the deformation is monitored in a test section designed to have nearly uniform stress and …
-
The structural evolution of an ancient accretionary prism in the Damara Belt, Namibia
… by a foliation. D₁ is associated With pure shear dominated layer-parallel extension characterised by disrupted lithological layering and hedding-parallel foliation S₀+₁. D₃ is defined as deformation related to the formation of an axial-planar S₂ caused by folding of S₀+₁ around F₂ hinge …
-
Interface Shear Behaviour and Modelling of Ultra-High Performance Concrete
… components. Therefore, understanding UHPC shear resisting performance is essential. To investigate the broadly varying and complex shear stress conditions that can develop in connection regions of modern concrete structures, an experimental program involving UHPC push-off specimens …
-
Characterization of unsteady flow separation on a turbulent boundary layer
… though its physical mechanism was completely dominated by shear. At k = 1, on the other hand, the advected structure was rotational in nature and moved at constant speed. Furthermore, particle paths showed that, as the bubble moved downstream, it was able to maintain its shape by extracting …
-
Seismic Behavior and Design of the Linked Column Steel Frame System for Rapid Return to Occupancy
… have been designed to be short and plastically shear dominated and the LCF met the design intent of 2.5% inter-story drift limits. For evaluating the LCF response, hybrid testing was performed for ground motion at three different intensities; 50%, 10% and 2% probability of exceedence in 50 years …
-
Crack path determination for non-proportional mixed-mode fatigue
… observed in some materials to shift from tensile-dominated Mode I to shear-dominated Mode II or mixed-mode crack growth at higher proportions of initial Mode II loading, but non-proportional loads are not well-characterized. An LEFM approach is desired in order to implement the model in crack …
-
Effect of Cumulative Cycling on Shear Strength of Older Reinforced Concrete Bridge Columns
… research assessed the effect of cycling on the shear strength of older reinforced concrete bridge columns in Washington State, particularly those designed prior to 1975. These columns typically have low transverse reinforcement ratios (<0.5%) and circular hoops with overlapped ends, making them …
-
Detailed three - dimensional nonlinear hybrid simulation for the analysis of large - scale reinforced concrete structures
… and inaccurate, especially when dealing with shear dominated structural members and structures with complex geometries. Nevertheless, this type of finite element is used widely for the analysis and design of RC structures due to its computational efficiency which is attributed to the resulting …
Page 1 of 3