Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 97 for “"Shear-wave velocities"”.
-
Hybrid surface-wave analysis method to estimate shear-wave velocities for geotechnical engineering applications, A
Includes bibliographical references (pages 111-114).
-
Geostatic stress state evaluation by directional shear wave velocities, with application towards geocharacterization at Aiken, SC
… that provide paired complementary types of shear waves. It is well-established that multiple types of shear waves occur in the ground due to their directional and polarization properties. The shear wave velocity (Vs) provides the magnitude of small strain stiffness (G0) which depends on …
-
Estimation of Shear wave velocities from P-P and P-S seismic data using Equivalent Offset Migration
Prestack migration of converted wave data requires accurate acoustic and shear wave velocities Vp and Vs. This thesis presents new methods to estimate the shear velocities using a single converted wave velocity Vc, that combines Vp and Vs. The acoustic velocity Vp, and a constant value for the …
-
Shear wave velocity measurements of normally consolidated kaolinite using bender elements
… design procedures for offshore foundations. Shear wave velocities were measured in such a test bed of kaolinite slurry from the initial stages of consolidation through secondary consolidation. Shear wave velocities were measured using bender elements. Two different types of bender-element …
-
A Study Regarding the Application of the Refraction Microtremor (ReMi) Process in an Underground Mining Environment.
… array of geophones. Data is processed to obtain shear-wave velocities underneath the array. The data for our study was collected at an underground gold mine in Nevada, and was analyzed using the SeisOpt® ReMi(TM) (© Optim, 2015). The data was collected using horizontal and vertical geophones, …
-
Multi-Component Active Source Rayleigh Wave Analysis
… on how a site responds is the near surface shear wave seismic velocity distribution. One commonly used method for indirectly estimating shear wave velocities is Multichannel Analysis of Surface Waves (MASW), which utilizes a spread of vertical geophones to measure Rayleigh wave dispersion. …
-
Sources and receivers with the seismic cone test
… The sources investigated were mechanical shear and compression wave sources consisting of a hammer-and-weighted-plank source; an on-shore Buffalo gun source utilizing shotgun shells; an off-shore seismic cap source; and an off-shore embedded blade with seismic cap source. The receivers …
-
Rayleigh Wave Analysis in the Presence of High Impedance Boundaries
Surface wave data is commonly used to estimate shear wave velocity of the subsurface. Most standard approaches for analyzing surface wave data fail under conditions when high-impedance boundaries, or sharp contrasts, exists within the range of sensitivities. I present two primary scenarios, one …
-
The Development of a Material Model for Engineering Behavior Characteristics of Cemented Soils for the Las Vegas Valley.
… for closure of fractures if desired. Laboratory shear and primary wave velocities were measured for all samples. In addition, field shear wave velocity of the site, where the samples were obtained, was assessed using Refraction Microtremor (ReMi) and Multichannel Analysis of Surface Waves (MASW) …
-
Field investigation of Love waves in near-surface seismology
Seismic surface waves have the potential to yield important information about the subsurface. In particular, the spectral analysis of Rayleigh waves has been used to determine near-surface shear-wave velocities that are related to the elastic properties of the media through which they travel. Love …
-
Estimation of dry-rock elastic moduli based on the simulation of mud-filtrate invasion effects on borehole acoustic logs
… initial estimates of dry-bulk (kdry) modulus and shear rigidity ([Greek small letter mu]dry) and a constraint of Poisson's ratio (ν) typical of the formation. This process generates two-dimensional spatial distributions of compressional and shear-wave velocities, and density. Subsequently, sonic …
-
GEOPHYSICS-BASED GROUND CONTROL AND EXCAVATION DESIGN METHODOLOGY BASED ON ACCEPTABLE DAMAGE
… experimental study of geophysical measurements, shear wave velocities, for soft soils under isotropic consolidation. The presented results show that the variation of effective stress during consolidation can be determined based on shear wave measurements. An approach to estimate consolidation …
-
Field measurements of the linear and nonlinear shear moduli of cemented alluvium using dynamically loaded surface footings
… test method to evaluate the linear and nonlinear shear modulus of soil is presented. The field method utilizes a surface footing that is dynamically loaded horizontally. The test procedure involves applying static and dynamic loads to the surface footing and measuring the soil response beneath the …
-
Effect of particle cementation on the stifness of uniform sand as measured with stress wave velocities
… sand was carried out by measuring compression wave velocities (VP) and shear wave velocities (VS) on both clean and artificially cemented specimens. Piezoelectric transducers (PT) were used to perform the majority of the measurements. Shear wave velocity (VS), shear moduli (G) and material …
-
Determining strength parameters of oil well cement
… modulus of elasticity and static, dynamic and shear wave velocities. The dynamic behavior of class A cement slurry was tested using a Mechanical Properties Analyzer (MPro, Chandler Engineering) and the compressive strength was determined using measured compressional wave velocities and embedded …
-
Strength and Deformation of “Tunable” Clay-Polymer Composites
… and montmorillonite, in order to determine their shear strength and compressibility parameters, as well as their shear wave velocities, and to determine any links between their observed meso-scale behavior and known micro-scale behavior. It was shown that with the addition of polyacrylamide (PAM) …
-
On the use of shear wave velocity to characterize changes in fines content of a silty sand
Seismic waves are commonly used to characterize the mechanical properties of soils, either through in-situ techniques or laboratory measurement. Several factors are known to influence shear wave velocity, including stress, void ratio and soil fabric. In the case of internally unstable soils, where …
-
3-D Seismic Methods for Shallow Imaging Beneath Pavement
… near-surface 3D seismic reflection and surface wave data on pavement. Increased efficiency for mapping simple subsurface interfaces through a combined use of modified land survey designs and a hydraulically driven acquisition device are demonstrated. Using these techniques subsurface reflectors …
-
SIMPLIFIED DYNAMIC ANALYSIS OF THREE DIMENSIONAL SHEAR BUILDING ON ELASTIC FOUNDATION
… analysis of seismically excited asymmetric shear buildings on flexible foundations. The governing equations are reduced to a set of integro-differential equations involving the interaction displacements alone with the degrees of freedom of the superstructure being eliminated through the use …
-
Understanding Canadian Cordillera crustal and upper-mantle structure with joint Bayesian inversion of receiver functions and surface-wave dispersion curves
… Jointly inverting receiver-functions and surface-wave dispersion curves constrains shear-wave velocity structure. With this inversion method, I study the spatial variability of major lithospheric discontinuities, specifically of the Mohoroviciˇ c discontinuity (Moho) and lithosphere-asthenosphere …
Page 1 of 5