Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Shielding gas"”.
-
Shielding gas parameter optimisation in arc welding processes
This thesis is focussed on shielding gas optimisation in gas shielded arc welding processes, and has been conducted along two themes; deriving conditions in which the shielding gas flow rate can be safely reduced, and through the highly novel process of alternating shielding gases.The correct …
-
Optimisation of GMAW via the alternating shielding gas technique
The use of the alternating shielding gas technique in arc welding systems has been previously studied due to advantages such as greater penetration of the weld joint, refined microstructure of the fusion zone, reduced heat input, and increased travel speeds of the welding torch. Yet, relatively …
-
Shielding gas oxygen equivalent in weld metal microstructure optimization
Includes bibliographical references (pages 134-139).
-
Effects of mixtures of carbon dioxide, helium, and argon as shielding gas in the gas metal-arc welding process
Includes bibliographical references.
-
Effects of shielding gas purity and gas purification on the behavior of gas metal arc and gas Tungsten arc welds
… presented investigated the effects of shield gas purity and gas purification on the behavior of gas metal arc welds and gas tungsten arc welds of important industrial alloys. A "Nanochem" resin-based purification system was used to purify the inert argon and helium shielding gases used . The …
-
Influence of heat treatment and shielding gas environment on the very high cycle fatigue behavior of 17-4 precipitation hardened stainless steel
… using either argon (Ar) or nitrogen (N2) as the shielding gas during L-PBF for AM specimens was also investigated. Wrought specimens were either left in the annealed state or given either an H900 or H1025 heat treatment. The ultrasonic fatigue system used in this study applied uniaxial, fully …
-
A Numerical and Experimental Study on Effect of Composition of Ar-N2 Shielding Gas on the Weld Bead Profile and its Prediction for Hot Wire Arc Additive Manufacturing
… used in WAAM, one of the important parameters is shielding gas which plays a significant role in material quality, properties, and defects. In this study, a controlled amount of Argon (Ar) and Nitrogen (N2) shielding gases are used to see the effect on the weld bead depth and width. In addition, a …
-
The influence of the shielding gas type and mass flow on the melt zone in the surface treatment of 1010 steel using continuous-wave high-power CO₂and Nd:YAG lasers
… of laser scanning speed, mass flow and type of shielding gas on the melt depth of 1/4" thick 1010 steel have been studied in this project. In agreement with previous works, increasing scanning speed showed a decrease in the depth of the melt zone in the process. The next factor, the shielding …
-
Factors affecting the impact toughness of ultra low carbon steel weld metal
… factors affecting the impact toughness of four gas metal arc welds (GMAW) made on HSLA-100 base plate using a newly developed steel weld wire were studied. The weld metal analysis included chemistry, mechanical testing (hardness, CVN/FATT), as well as optical, scanning and transmission electron …
-
Powder Spray Laser Additive Manufacturing of Zirconium
… Energy Deposition (DED) method with localized shielding to successfully deposit commercially pure zirconium on zirconium alloy substrate. Effects of laser power, laser scan speed, laser spot size and powder feed rate were evaluated on deposition rate, dilution, geometrical circularity and …
-
Optimisation of automated gas metal arc fillet welding
Gas Metal Arc Welding (GMAW) has been one of the most widely used industrial welding processes since around the middle of the 20th Century. However, the large number of input parameters and variables makes it extremely challenging to understand exactly what impact the variation of each of the …
-
A Study of Reduced Activation Ferritic Martensitic Metal Core Wire for Wire Arc Additive Manufacturing
… were further tested with the addition of shielding gas experimentation to determine if porosity’s visible in the initial prints could be removed. The shielding gas results did aid in the porosity control, but introduced other issues arose. With a reduction in amperage input from the …
-
Electro-Spark Deposition Machine Design, Physical Controls and Parameter Effects
… force, movement speed, movement pattern and shielding gas were explored. Three different custom power supplies were developed to encompass performance improvements reported in previous studies and compare advanced circuit and parameter behavior against the traditional ESD machine. This was …
-
Three-dimensional transient thermo-elasto-plastic modeling of gas metal arc welding using the finite element method
… thermo-elasto-plastic modeling of Gas Metal Arc Welding (GMAW), a three-dimensional finite element transient heat transfer model has been developed for the autogenous Gas Tungsten Arc Welding (GTAW) process which does not require the complicated metal transfer modeling. A …
-
Reduction of residual stress and distortion in HY100 and HY130 high strength steels during welding
… for welding with 98% argon and 2% oxygen as shielding gas. (JES)
-
Κραματωμένες επικαλύψεις με τη τεχνική μεταφερόμενου τόξου πλάσματος
… absorption of the nitrogen contained in the shielding gas. The percentage of austenite increased proportionally with the increase in chromium and nitrogen percentage. The existence of chromium nitrides or sigma - phase deteriorated the anti-corrosive behavior of the produced coatings, since …
-
Investigation of Atmospheric Pressure Plasma Jet Properties and Operations in Ambient Air
Plasma is gas ionized by energizing electrons through electric fields, leading to various collisional reactions that result in a number of reactive species useful in many applications. A main characteristic of plasmas is the creation of luminous excited species that relieve their energy through …
-
A Study of the Electrical Flame Off Process During Thermosonic Wire Bonding with Novel Wire Materials
… and can also influence the shape of the FAB. Shielding gases are required to reduce oxidation and improve FAB quality. This thesis focuses on the EFO process and the influence of EFO parameters and shielding gases on Au and Cu FABs. The primary focus of this thesis is to provide a better …
-
Localized deformation in spent nuclear fuel disposal canisters
… method has recently been modified by argon shielding gas to reduce oxidation during welding. When compared to the old weld, which was welded without shielding gas, the new weld exhibits considerably less oxide particles, and the weld microstructure is more uniform. However, DIC testing …
-
Study of Additive Manufacturing of Hastelloy X Using Plasma Arc Welding Technology
… optimize the effects of arc length, nozzle size, shielding gas flow rates, wire feed rate, travel speed, current, and linear energy density. In the meantime, an additional trailing shielding mechanism was introduced to reduce surface oxidation while maintaining acceptable geometry for …
Page 1 of 3