Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Shock Isolation"”.
-
Shock isolation using switchable stiffness
… control strategy applied to the problem of shock isolation. This is based on the principle that the stiffness and mass are the principal physical properties that control the passive system shock response. The problem of shock response control is divided in two stages. Firstly, the maximum …
-
Shock isolation systems incorporating Coulomb friction
… investigates a novel approach to the problem of shock isolation. The questions considered are whether friction produces a better performance in terms of reduced response during a shock compared to viscous damping and a lower residual response after the shock.<br/><br/>To gain physical insight, a …
-
Development of seat shock isolation systems
… has been created to predict the behavior of seat shock isolation systems exposed to mine blast loaDing The model is a two dimensional, five degree-of-freedom, rigid body, mass-spring-damper approximation of the seat system and human occupant. The outputs of the model are the positions, velocities, …
-
Shock isolation using magnetorheologically responsive technology
The purpose of this thesis is to develop a shock isolation system using magnetorheologically (MR) responsive technology to isolate shock input to various components in the light weight military vehicles susceptible to ballistic shock effects; Two methods are chosen for isolation of the shock. One …
-
Semi-active control techniques for shock isolation
… devices (MR damper, MR elastomer) for shock isolation systems are considered. Semi-active control systems combine the best features of both the passive and active control systems, offering the reliability of passive devices, yet maintaining the versatility and adaptability of fully …
-
Optimal Design of Shock Isolation System for the Balloon Gondola
… a balloon gondola system which is subjected to shock input upon landing. In particular, the validity of the one-degree-of-freedom idealization for the system is studied by comparing the results predicted by this model to results predicted by a more complicated two-degree-of-freedom idealized …
-
Design and evaluation of negative stiffness honeycombs for recoverable shock isolation
… stiffness elements are proven mechanisms for shock isolation. The work presented in this thesis investigates the behavior of negative stiffness beams when arranged in a honeycomb configuration. Regular honeycombs consisting of cells such as hexagonal, square, and triangular absorb energy by …
-
Evaluation of systems containing negative stiffness elements for vibration and shock isolation
… stiffness mechanisms for both vibration and shock isolation. The negative stiffness element studied in this research is an axially compressed beam. If a beam is axially compressed past a critical value, it becomes bistable with a region of negative stiffness in the transverse direction. By …
-
Optimal design of nonlinear shock isolation for large, locally nonlinear structural systems
… approach for the optimal design of nonlinear shock isolation for large structural systems is developed. The repeated solution of arbitrarily large finite element models with localized nonlinear components is made possible through the use of a highly efficient nonlinear transient re-analysis …
-
A comparative study of advanced suspension dampers for vibration and shock isolation performance
… ER damper and MR damper. The vibration and shock isolation performance of the dampers are compared using a four degree-of-freedom pitch plane ride model. A wide range of performance measure is considered in this investigation, namely--sprung and unsprung mass responses, relative motions, …
-
Shock isolation performance of a negative stiffness honeycomb with an integrated fluid damping system
In this thesis, the design, modeling, and shock testing of a monolithic curved beam negative stiffness honeycomb with an integrated air damping system is presented. The purpose of this research was to explore the potential to introduce one way damping into negative stiffness honeycombs by …
-
Design and control of a vibration isolator using a biased magnetorheological elastomer
… elastomer and control techniques in the area of shock and vibration isolation. Typical passive isolation methods have short comings in meeting competing objectives. A specific problem is isolating electronic packages mounted to military vehicle walls from shock. Often passive elastomer based …
-
An investigation to simulate the linear viscoelastic behavior of an elastomer
For vibration and shock isolation investigations the conventional engineering representation of an elastomer under shear is a mechanical model with a spring and a dashpot in parallel. To represent more adequately the dynamic behavior of an elastomer, more complex model configurations are required. …
-
Application of Nonlinear Localization to Engineering Structures
… will find application in robust vibration and shock isolation designs of practical large-scale structures.
-
Dynamic Analysis of CubeSat Impact on Lunar Surface
… EagleCam. The analyses performed are kinematic shock analysis, vibration analysis, NASTRAN simulation, LS-DYNA simulation and a full scale drop test. The outcomes from this work are that the structure of EagleCam will survive the impact given that the shock isolation system chosen will mitigate …
-
Analytical amd experimental aspects of nonlinear normal modes and nonlinear mode localization
… to passive and/or active vibration and shock isolation designs based on the concepts of NNMs and nonlinear mode localization.
-
Combined Shock and Vibration Isolation Through the Self-Powered, Semi-Active Control of a Magnetorheological Damper in Parallel with an Air Spring
Combining shock and vibration isolation into a single isolation system package is explored through the use of an air spring in parallel with a controlled magnetorheological fluid damper. The benefits of combining shock and vibration isolation into a single package is discussed. Modeling and control …
-
HIGH STRENGTH SEMI-ACTIVE ENERGY ABSORBERS USING SHEAR- AND MIXED-MODE OPERATION AT HIGH SHEAR RATES
… design space of semi-active energy absorbers for shock isolation and crash safety by investigating and characterizing magnetorheological fluids (MRFs) at high shear rates ( > 25,000 1/s) under shear and mixed-mode operation. Magnetorheological energy absorbers (MREAs) work well as adaptive …
Page 1 of 2