Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 142 for “"Shock Loading"”.

  1. CYLINDRICAL STRUCTURE UNDER SHOCK LOADING

    … experience a multitude of dynamic and pressure loading when in a submerged environment. Internally, those forces are negligible because of the sound structural integrity the vessel is providing. However, if an underwater explosion should occur—the chances are slim but never zero—the outer shell …

    nps Repository record for CYLINDRICAL STRUCTURE UNDER SHOCK LOADING (opens in a new tab)

  2. Dynamic Response Of Complex Materials Under Shock Loading

    … Cu46Zr54 metallic glass under adiabatic planar shock wave loading (one-dimensional strain) with molecular dynamics simulations, including Hugoniot (shock) states, shock-induced plasticity, and spallation. The Hugoniot states are obtained up to 60 GPa along with the von Mises shear flow …

    tamu Repository record for Dynamic Response Of Complex Materials Under Shock Loading (opens in a new tab)

  3. UNDERWATER SHOCK LOADING OF MIDSHIP SECTION UNDERWATER VOLUME

    … of scaled underwater explosion (UNDEX) shock loading, this research compared the structural responses of two models fabricated with the additive manufacturing (AM) technique using Polyamide-12 (PA12). One was an isolated midship section model called Testing Ship Midship Section (TSMS), …

    nps Repository record for UNDERWATER SHOCK LOADING OF MIDSHIP SECTION UNDERWATER VOLUME (opens in a new tab)

  4. FAILURE OF COMPOSITE PLATES SUBJECTED TO SHOCK LOADING

    … prudent. Smaller models that produce underwater shocks on a reduced scale can mimic the effects of a larger explosive device. This project employed a safe and easily replicated test using liquid nitrogen within a sealed pressure vessel to create an underwater explosion. This test was performed …

    nps Repository record for FAILURE OF COMPOSITE PLATES SUBJECTED TO SHOCK LOADING (opens in a new tab)

  5. Microstructure-sensitive simulation of shock loading in metals

    … model has been developed to model the shock response of single crystal aluminum from peak pressures ranging from 2-110 GPa. This model couples a description of higher-order thermoelasticity with a dislocation-based viscoplastic formulation, both of which are formulated for single …

    gatech Repository record for Microstructure-sensitive simulation of shock loading in metals (opens in a new tab)

  6. INVESTIGATION OF SUBMERGED CYLINDRICAL BODY RESPONSE TO SHOCK LOADING

    … near naval vessels is known to cause severe shock loading, which can have damaging effects on a submerged body due to fluid-structure interaction. Since necessary repairs are often complex, costly, and time consuming, shipbuilders and repair yards have an interest in being able to rapidly but …

    nps Repository record for INVESTIGATION OF SUBMERGED CYLINDRICAL BODY RESPONSE TO SHOCK LOADING (opens in a new tab)

  7. STUDY OF COMPOSITE STRUCTURES SUBJECTED TO UNDERWATER SHOCK LOADING

    … explosions (UNDEX) produce severe and complex loadings in naval applications. Increased use of composite materials in naval applications requires better understanding of how composite structures will respond and survive an UNDEX. A legacy underwater shock loading method, using liquid nitrogen, …

    nps Repository record for STUDY OF COMPOSITE STRUCTURES SUBJECTED TO UNDERWATER SHOCK LOADING (opens in a new tab)

  8. DYNAMIC MECHANICAL BEHAVIOR OF MAGNESIUM ALLOYS UNDER SHOCK LOADING CONDITION

    … Texture analysis on the alloy prior and after shock loading was done using X-ray diffraction. Scanning electron microscopy was used to study the microstructural evolution in the alloys before and after shock loading. Chemical analysis and phase identification were done by energy dispersive …

    sask Repository record for DYNAMIC MECHANICAL BEHAVIOR OF MAGNESIUM ALLOYS UNDER SHOCK LOADING CONDITION (opens in a new tab)

  9. A study of the biofiltration process under shock-loading conditions

    … respond very successfully to quantitative shock-loading conditions, and less effectively to qualitative shock-loads. Adsorption/desorption of VOCs on the packing material was found to be a key factor for the transient response. Excellent agreement was found between steady state data and …

    njit Repository record for A study of the biofiltration process under shock-loading conditions (opens in a new tab)

  10. The effects of acetone shock loading on phenol acclimated cultures

    The possibility of acetone shock loadings to phenol acclimated systems resulting in sequential substrate utilization and increased effluent phenol concentrations was evaluated. Phenol acclimated batch and continuous-flow systems, developed with seed from a municipal wastewater treatment plant, were …

    vt Repository record for The effects of acetone shock loading on phenol acclimated cultures (opens in a new tab)

  11. Crack initiation under shock loading : validation of a new testing technique

    … Besides, some of them are limited to low loading velocities and the evaluations are made following a static approach. In consequence, a fundamental study is required with two aims, namely, a development of a new impact testing technique and the analysis of the extension of the fracture …

    oxford Repository record for Crack initiation under shock loading : validation of a new testing technique (opens in a new tab)

  12. Experimental Behavior of High Strength Concrete Slabs Subjected to Shock Loading

    The design to resist blast loading is required in many private and governmental buildings. The research presented in this thesis characterizes the response of high strength concrete panels, reinforced with high strength vanadium steel, subjected to blast loading under controlled conditions. This …

    umkc Repository record for Experimental Behavior of High Strength Concrete Slabs Subjected to Shock Loading (opens in a new tab)

  13. Empirical Study: Failure of Glass-to-Metal Seals During Shock Loading

    … failure of the glass-to-metal (G/M) seal. Impact loading was conducted with a drop weight machine at room temperature and 300¡F, and then empirically analyzed with high speed video. Resulting peak overload force, shear stress, and impulse were all calculated. The room temperature samples were …

    clemson Repository record for Empirical Study: Failure of Glass-to-Metal Seals During Shock Loading (opens in a new tab)

  14. UNDERWATER SHOCK LOADING OF CONCENTRIC PLA CYLINDERS WITH A FILAMENT ANNULUS

    This research studied the dynamic loading of 3D-printed concentric PLA cylinders when subjected to an underwater shock event. The open-cell filament annulus was studied with three different patterns: tetrakaidecahedron, cube, and auxetic. The cylinders were sealed by two aluminum end caps and then …

    nps Repository record for UNDERWATER SHOCK LOADING OF CONCENTRIC PLA CYLINDERS WITH A FILAMENT ANNULUS (opens in a new tab)

  15. Biochemical Aspects of Qualitative Shock Loading of Aerobic Waste Treatment Systems

    Made available in DSpace on 2014-12-05T17:37:06Z (GMT). No. of bitstreams: 1 6000186.pdf: 8759188 bytes, checksum: 8126ffaed3642520aac2e4ad8eecd4fb (MD5) Previous issue date: 1959

    uiuc Repository record for Biochemical Aspects of Qualitative Shock Loading of Aerobic Waste Treatment Systems (opens in a new tab)

  16. Behavior of Magneto-Rheological Fluids Subject to Impact and Shock Loading

    … concerning MR fluid behavior in impact and shock applications are relatively unknown. To investigate MR fluid properties in this regime, MR dampers were subjected to impulsive loads. A drop-tower test facility was developed to simulate the impact events. The design includes a guided …

    vt Repository record for Behavior of Magneto-Rheological Fluids Subject to Impact and Shock Loading (opens in a new tab)

  17. The Effects of Locomotion-Induced Shock Loading on Tibiofemoral Bone Stress Response

    … to investigate the effects of locomotion-induced shock loading and LE alignment on tibiofemoral bone stress response in older adults without knee OA. Number of Subjects: Five male and five female subjects with no medical diagnosis of knee OA (57.9 ± 3.9 years; 84.2 ± 12.7 kg; 1.7 ± 0.1 m) …

    unlv Repository record for The Effects of Locomotion-Induced Shock Loading on Tibiofemoral Bone Stress Response (opens in a new tab) Download PDF for The Effects of Locomotion-Induced Shock Loading on Tibiofemoral Bone Stress Response (opens in a new tab)

  18. Design and hybrid additive manufacturing for electronic components that can withstand shock loading

    … to produce electronic devices that can survive shock loading such as that experienced in an artillery launch. This work, supported by the Army Research Laboratory, explores how the design of NSEs can be tuned to dissipate as much energy as possible and how a primary building block of an …

    texas Repository record for Design and hybrid additive manufacturing for electronic components that can withstand shock loading (opens in a new tab)

  19. Start-up and shock loading characteristics of a rotating biological contactor package plant

    … characteristics and resistance to controlled shock loadings. Samples from seven locations, ranging from the influent through each stage of the RBC into the effluent, were collected and analyzed in order to monitor treatment performance. Samples were analyzed for COD, TKN, NH₃-N, Org-N, NO⁻₃-N, …

    vt Repository record for Start-up and shock loading characteristics of a rotating biological contactor package plant (opens in a new tab)

  20. Effects of microstructure and chemistry on the ignition sensitivity of PBX under shock loading

    … of heterogeneous energetic materials subject to shock loading is analyzed using both a Lagrangian and Eulerian computational framework. The specific focus here is on the various microstructure heterogeneities (including cracks, granular anisotropy, voids, and aluminum additives) and their …

    gatech Repository record for Effects of microstructure and chemistry on the ignition sensitivity of PBX under shock loading (opens in a new tab)

Page 1 of 8