Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"Shock test"”.
-
Seat shock test stand development
… a seat system that will reduce the level of shock introduced into the bottom of a seat when a vehicle trips a land mine. In order to develop the seat system, a test stand was designed using an air cannon to fire a 5 pound steel slug at an impact plate, creating a high acceleration impulse or …
-
Development of a Novel Thermal Shock test for isostatically Pressed Carbon-Bonded Refractories
In refractory engineering, assessing thermal shock resistance is crucial for flow-control components such as ladle shrouds, tundish nozzles, and slide gates. Chemical, mechanical, and thermal degradation of these parts can produce severe safety, environmental and economic consequences in steel …
-
The Study of the Hidden Bearing Area: Comparison Between Flat and Corner Cushion Shock Test Performance
… It has been comprehensively used for high-shock, compression, and vibration-sensitive products. Over the past 60 years, scientists and engineers have a come a long way in both packaging-related academics and industries. A new series of testing standards was developed (ASTM D1596 and ASTM …
-
Shock qualification of combat systems equipment using tuned mounting fixtures on the U.S. Navy mediumweight shock machine
… Current specifications for combat systems shock qualifications are mandated in MIL-S-901D. Analyzing the differences and relationships between the predicted shock excitation, as derived from previous ship shock trials, and that shock excitation which is produced by the u.S. Navy …
-
Development of Cal Poly's Shock Table
Shock is one of the environmental tests that a spacecraft must pass before being cleared for launch. Shock testing poses a challenging data acquisition issue and careful selection of equipment is crucial to creating a successful shock test facility. Cal Poly’s CubeSat programs can currently perform …
-
A parametric study of elastic response of submarine-installed equipment subjected to UNDEX side-on loading
… and internally attached structures to underwater shock loading. In view of the expense and possible involvement of non-shock testable equipment it is not always desirable to perform actual shock tests utilizing real hulls of SSTV's (Submerged Shock Test Vehicles). With the advent of large scale …
-
ANALYSIS OF A CIRCULAR RESONANT PLATE FOR SHOCK TESTING
Designing a resonant plate for shock test specifications involves an understanding of how a system will respond with a given set of input and output locations in all three directions. To investigate how to effectively change the off-axis responses to meet test specifications, a finite element model …
-
Dynamic response of cylindrical shells to underwater end-on explosion
… were performed to investigate underwater shock propagation and the induced nonlinear response of cylindrical shells with end caps. The cylinders were subjected to shocks from explosive charges at 12 inches (near-field) and 28 feet (far-field) from the cylinder. And underwater shock test …
-
Test Methodologies for Dynamic Fracture Strength of Single Crystal Silicon
… of SCSi. The primary focus was to develop test methodologies that can be used for identifying the dynamic fracture strength of SCSi. The methodologies developed were applied to simple MEMS shock test structures to measure preliminary dynamic fracture strength values. Based on the …
-
Analysis of Environmentally Friendly Marking Ink for Military Equipment and Electronics
… in military applications. Eleven products were tested, and two products were recommended for use: Sherwin Williams MIL-PRF-22750 Type I and Union Ink Uniglaze. Both products contain at most one carcinogen ingredient and no reproductive toxicant. Both products passed MIL-STD 202G Method 215K …
-
Experimental investigation into the dynamic response of two DOF tuned deck simulator for shock qualification of shipboard systems
The explosive shock created by the underwater explosion of a mine or torpedo in close proximity to a surface ship can severely threaten the combat capability and survivability of the ship. MEL-S-901D specifics the shock test procedures and acceptance criteria for all shipboard systems that must …
-
Design, Manufacture, Dynamic Testing, and Finite Element Analysis of a Composite 6u Cubesat
… focused on designing, manufacturing, and dynamic testing of a 6U CubeSat made of carbon fiber, fiberglass, and aluminum. The main objective of this study was obtaining a mass reduction of a 6U CubeSat structure, maintaining the stiffness and strength. Considering the thermal effects of the used …
-
UPDATED APPROACH TO SHOCK FAILURE ASSESSMENT OF SHIPBOARD EQUIPMENT
… underwater explosions that impart a mechanical shock onto the ship structure, its subsystems, equipment and crew. This violent shock loading, although not in direct contact with the ship hull, seeks to cause significant damage and even failure of critical components, potentially rendering vital …
-
Using Frequency Based Substructuring to Optimize Multi-Axis Resonant Plate Shock Tests
Resonant plate pyroshock tests only offer to test one component axis at a time, while the qualification pyroshock tests often have three single-axis specifications to meet. There is an interest in creating a multi-axis test environment from the single-axis resonant plate parts to save testing time, …
-
Experimental and theoretical assessment of Through-Silicon Vias for 3D integrated microelectronic packages
… designed and fabricated and subjected to thermal shock test. Cross-sectional SEM failure analysis is carried out to study cohesive and interfacial crack initiation and propagation under thermal excursions. In addition, local micro-strain fields under thermal excursions are mapped through …
-
Chip-last embedded low temperature interconnections with chip-first dimensions
… (3) design, fabrication and characterization of test vehicles for reliability and failure analysis of the interconnection. This research represents the first demonstration of ultra-fine pitch Cu-to-Cu interconnection below 200°C using non-conductive film (NCF) as an adhesive to achieve bonding …
-
Cycling studies of micro-tubular solid oxide fuel cells
… were observed. Lastly, thermal and electrical shock test were performed. The critical fracture temperature (ΔTC) was established by thermal shock at approximately 180⁰C. Under electrical shock testing, the tubes were found to fail after 13 – 15 electrical shock cycles, depending on the shock …
-
Effect of veneering technique, heat rate, holding time and zirconia thickness on the mechanical properties of porcelain veneers
… METHODS: Biaxial flexural strength and Thermal shock resistance tests were conducted to evaluate the mechanical properties of veneer porcelain. Core material, Y-TZP and two porcelain veneers, IPS e.max Ceram and VITA VM9, were used in this study. Vita YZ zirconia blocks were sectioned and …
Page 1 of 2