Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Short beam Shear"”.

  1. Short Beam Shear Strength Evaluations of GFRP Composites: Correlations Through Accelerated and Natural Aging

    … and literature data. Knowing that interlaminar shear strength (ILSS) is the most detrimental mechanical property, this work was solely focused on the degradation of ILSS of glass fiber reinforced vinyl-ester under varying pH environments and temperatures. The degradation of ILSS in composites …

    wvu Repository record for Short Beam Shear Strength Evaluations of GFRP Composites: Correlations Through Accelerated and Natural Aging (opens in a new tab)

  2. Povrchové úpravy skleněných vláken s využitím plazmové nanotechnologie

    … kompozitního materiálu byl posuzován pomocí short beam shear testu.

    brno-tech Repository record for Povrchové úpravy skleněných vláken s využitím plazmové nanotechnologie (opens in a new tab)

  3. Performance Evaluation of Composite Utility Structures under Wildfires and Mitigation Methods

    … properties under three-point bending and short beam shear test methods as per ASTM D790-17 and ASTM D2334/D2344M-16, respectively. Then, both the bending and short beam shear strengths were compared to the strengths of unburnt poles and crossarms. For both batches, test samples were first …

    wvu Repository record for Performance Evaluation of Composite Utility Structures under Wildfires and Mitigation Methods (opens in a new tab)

  4. Mechanical Properties of Aerospace Composite Parts Made from Stitched Multilayer 3D Carbon Fibre Preforms

    … to evaluate flexural modulus and strength, short beam shear strength and drop weight impact resistance of the material. Also, integral reinforced panels (IRPs) featuring a reinforcing section joined to a flat plate of varying laminating sequences were manufactured to evaluate debonding …

    ottawa-retro Repository record for Mechanical Properties of Aerospace Composite Parts Made from Stitched Multilayer 3D Carbon Fibre Preforms (opens in a new tab)

  5. The effects of jet exhaust blast impingements on graphite-epoxy composites.

    … of the composites is determined by means of the short beam shear test Thejet exhaust tests were designed to test the worst case conditions for an F-18 aircraft operating off an aircraft carrier. Results indicate that the composites show no significant property changes if the temperature is …

    nps Repository record for The effects of jet exhaust blast impingements on graphite-epoxy composites. (opens in a new tab)

  6. Mesoscale Numerical Modelling and Failure Prediction of Automated Fibre Placement Composites

    … Thus, several experimental programs including short beam shear, low-velocity impact, and compression-after-impact were conducted to facilitate understanding the effect of these geometric features on the structural performance of AP-Ply. The finite element method provided in this thesis was …

    unsw Repository record for Mesoscale Numerical Modelling and Failure Prediction of Automated Fibre Placement Composites (opens in a new tab)

  7. Effect of knitting and preforming parameters on mechanical properties of weft knitted glass/epoxy composites

    … tension test, compression test, flexural test, short beam shear test and Izod impact test. The results showed that the knitting and preforming parameters strongly influenced the mechanical properties of the weft knitted glass/epoxy composites.

    unsw Repository record for Effect of knitting and preforming parameters on mechanical properties of weft knitted glass/epoxy composites (opens in a new tab)

  8. Effects of Extreme Low Temperature on Composite Materials

    … materials. The work includes estimating the shear strength of carbon/epoxy and glass/polyester composites at low temperatures and finding the rate of generation of microcracks in composites at cryogenic temperatures by acoustic emission technique. Microcracks increase the permeability of …

    uno Repository record for Effects of Extreme Low Temperature on Composite Materials (opens in a new tab)

  9. Characterization and Simulated Analysis of Carbon Fiber with Nanomaterials and Additive Manufacturing

    … behavior of implementing both continuous and short carbon fiber within Nylon and investigated for its effectiveness within additively manufactured prints. Here, 0.1wt% of pure nylon was combined with carbon nanotubes through both dry and heat mixing to determine the best method and used to …

    iupui Repository record for Characterization and Simulated Analysis of Carbon Fiber with Nanomaterials and Additive Manufacturing (opens in a new tab)

  10. The Comparison of Composite Aircraft Field Repair Method (CAFRM) with Traditional Aircraft Repair Technologies

    … were tested with microscopy, acid digestion, short beam shear, and mode I fracture tests. The researcher was able to determine the specimen's void content, fiber volume fraction, shear strength, and opening mode interlaminar fracture toughness for the specimens fabricated using the different …

    purdue-thes Repository record for The Comparison of Composite Aircraft Field Repair Method (CAFRM) with Traditional Aircraft Repair Technologies (opens in a new tab)

  11. Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications

    … exhibited mean flexural strength >205MPa, short beam shear strength >12MPa and tensile strength >146MPa. These results were comparable to similar oxide CMCs previously reported, validating this material.

    birmingham Download PDF for Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications (opens in a new tab)

  12. Experimental and computational investigation of the effect of environmental degradation on interlaminar shear strength of carbon/epoxy composites

    … conditions on the degradation of Interlaminar Shear Strength (ILSS) of the carbon-epoxy composite specimens was studied in the current research. The hygrothermal conditions capture the synergistic effects of field exposure and extreme temperatures. Short beam shear tests (SBST) were performed …

    alabama Repository record for Experimental and computational investigation of the effect of environmental degradation on interlaminar shear strength of carbon/epoxy composites (opens in a new tab)

  13. Effect of various process variables on the mechanical properties of laminates produced through resin transfer molding process

    … different tests (mechanical three point bending, short beam shear, and dynamic mechanical test) are conducted to examine the possibility that a single important process variable might not have the same effect on all of them.

    concordia Download PDF for Effect of various process variables on the mechanical properties of laminates produced through resin transfer molding process (opens in a new tab)

  14. Finite Element Analysis and Verification of Transverse Mechanical Properties of Generally Cylindrical Orthotropic Constitutive Modeling of 3-Phase Nanocomposite Unit Cell

    … in properties such as tension, flexural, short beam shear, and fracture toughness. Alongside these experimental studies, analytical equations have been developed to predict the behavior of these composites under various loading conditions, including tension, bending, shear, and fracture. …

    calpoly Repository record for Finite Element Analysis and Verification of Transverse Mechanical Properties of Generally Cylindrical Orthotropic Constitutive Modeling of 3-Phase Nanocomposite Unit Cell (opens in a new tab)

  15. Effects of Multiwall Carbon Nanotubes on the Mechanical Properties of Carbon-Reinforced Cyanate ester Composites

    … modulus, compressive strength and modulus, and short-beam shear strength. Thermogravimetric analysis (TGA) was used to study the four different formulations thermal stability in both air and nitrogen. Lastly, the flammability properties were also analyzed with micro combustion calorimetry (MCC). …

    texas-state Repository record for Effects of Multiwall Carbon Nanotubes on the Mechanical Properties of Carbon-Reinforced Cyanate ester Composites (opens in a new tab)

  16. A novel method for the manufacturing of thick composites

    … to be below 39{493}C. Latter method has shorter curing time than former one. Both methods can reduce the temperature gradient greatly. The degree of cure for both methods can be more than 87% with low exothermic temperature after the cure, and the laminate is rigid enough with this degree …

    concordia Download PDF for A novel method for the manufacturing of thick composites (opens in a new tab)

  17. Modeling and evaluation of moisture diffusion in polymer composite materials

    … to hygrothermal aging was assessed by conducting short beam shear test and flexural test at three immersion time points. In Part III, the effect of moisture on mechanical performance of PU sandwich composites was investigated. Mechanical property degradation due to moisture absorption was …

    must-thes Repository record for Modeling and evaluation of moisture diffusion in polymer composite materials (opens in a new tab)

  18. Highly durable hydrophobic thin films for moisture prevention of composite structures for aerospace applications

    … and evaluation purposes, which consisted of short beam shear, sandwich flexure, compression, paint tape test, moisture absorption and ingression, UV light and water contact angle, shrinkage, and bonding. In addition to these tests, finite element analysis (FEA) modeling was used to predict …

    wichita-thes Repository record for Highly durable hydrophobic thin films for moisture prevention of composite structures for aerospace applications (opens in a new tab)

  19. Characterization of syntactic foams and their sandwich composites: modeling and experimental approaches

    … carried out in three and four point bending and short beam shear configurations. Syntactic foams are tested in three different specimen sizes and orientations to characterize them as per the recommendations of various ASTM standards. Effect of specimen aspect ratio on the measured mechanical …

    lsu-thes Repository record for Characterization of syntactic foams and their sandwich composites: modeling and experimental approaches (opens in a new tab)

  20. Evaluation of fiber-matrix interfacial shear strength in fiber reinforced plastics

    … wound unidirectional composites were tested in short beam "shear." Corresponding samples were fabricated by embedding one to seven fibers in the center of polymer dogbone specimens that were tested in tension to determine critical fiber lengths. Those values were used in a new theoretical …

    vt Repository record for Evaluation of fiber-matrix interfacial shear strength in fiber reinforced plastics (opens in a new tab)

Page 1 of 3