Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"Silicon Content"”.
-
The Silicon Content of Blood
Interest in and knowledge of the silicon content of animal and vegetable tissues, has existed ever since 1857, when Witting, (1) a German research worker, reported 0.5> silicon dioxide in the ash of a sample of human blood. Ho really thorough work, however was done on the subject until the …
-
Characterization of martensitic stainless steels with high silicon content
… steel containing 3 and 4 weight percent (wt%) Silicon (Si) have been evaluated in this investigation. The tensile data indicate that limited plasticity in terms of failure strain (ef) was observed at room temperature irrespective of the Si content. A significant drop in ef was observed with the …
-
Tensile deformation and environmental degradation of T91 grade steels with different silicon content
… of martensitic T91 grade steels as a function of silicon (Si) content. The tensile strength and ductility was gradually enhanced at room temperature with an increase in Si content from 0.5 to 1.5 weight percent (wt%). However, the strength was reduced with 2.0 wt% Si, while showing increased …
-
Effect of initial composition on the silicon content of reaction-bonded silicon carbide, The
Includes bibliographical references (pages 56-59).
-
Metallurgical and corrosion characterization of a martensitic stainless steel as a function of silicon content
… steels containing 1 and 2 weight percent (wt %) silicon (Si), custom-melted by vacuum-induction melting practice, were tested for evaluation of their metallurgical and corrosion properties. The results of tensile testing indicate that both the yield strength and the ultimate tensile strength were …
-
Effects of silicon content and cooling rate on mechanical properties of heavy section ductile cast iron
… Three alloys were chosen with varying C and Si contents and an attempt to keep the remainder of the elements present constant. Within each heat, three test blocks were poured. Two blocks had chills – one with a fluid flowing through it to cool it (active chill) and one without the fluid …
-
PLANT FOLIAR PHOSPHORUS AND SILICON CONTENT CHANGES IN RESPONSE TO ROOT FUNGAL COMMUNITIES AND SILICON ENRICHMENT
… (P), to plants in exchange for carbon. Silicon (Si) is an important defence element for plants and several reports have observed a relationship between AMF colonisation and Si uptake. It is unknown how diverse soil microbial communities affect foliar Si and P concentrations, and whether …
-
Effects of temperature, strain rate and silicon content on dynamic strain ageing of modified chromium-molybdenum steel
… temperature range, irrespective of the silicon (Si) content. Since DSA is a thermally-activated process involving diffusion of solute elements, the effects of temperature and strain rate have been investigated. The activation energy associated with the diffusion process was gradually …
-
Ecological and genetic drivers of silicon accumulation in cereal crops
Over the past 30 years, the potential of silicon to improve crop plant performance has gained increasing recognition in the field of plant science. Silicon may be a key tool to guard crop production against uncertain future growing conditions by improving crop tolerance to abiotic and biotic …
-
Silicon-rich silicon nitride: tailoring material properties for photonic integrated circuits
<p class="MsoNormal">Silicon-rich silicon nitride is a promising hybrid material platform for use in photonic integratedcircuits. During the deposition process the silicon content of the bulk material can be altered, allowing the material properties of the new hybrid material to be tailored between …
-
Model systems for the investigation of metal-support interactions in cobalt based Fischer-Tropsch
… Tropsch synthesis decreased with increasing silicon content for the oxidized cobalt nanoparticles. This was attributed to the decline in the total number of active site available for CO bond cleavage with increasing silicon content. The methane selectivity passes a minimum with increasing …
-
Synthesis, and thermal and mechanical properties of Baℓℓ[subscript x]ZrℓPℓℓℓ[subscript x]Siℓ[subscript x]Oℓℓ
… properties were investigated as a function of silicon content. In addition, the grain size effect on the mechanical and thermal properties was studied for BaZPS with x=0.000, 0175, and 0.500, and the critical grain sizes were determined. The bulk linear thermal expansion values were found to …
-
Inhibition of cracking in pulsed laser welding of aluminium alloys
Pulsed laser welding of Aluminium Silicon alloys has been investigated experimentally to discover the causes of welding cracking which affect these alloys and a means for its prevention. Cracking was observed in conduction and non-conduction limited modes of welding, being more severe in the latter …
-
Effect of zinc availability on the morphology and nutrient physiology of a coastal and an oceanic diatom
… in maximum growth rate (60%), chlorophyll content (20%) and an increase in the surface to volume (S/V) ratio (80%) compared to Zn-replete cells. In S. costatum elemental quotas showed a decrease in silicon content (20%) and a significant increase in carbon content (52%) and phosphorus …
-
Genomics approach to understanding silicon in ash trees (Fraxinus excelsior)
Silicon is a non-essential plant nutrient thought to be beneficial for improving resistance against a wide range of herbivores and pathogens. However, the genetics underlying silicon uptake, deposition and disease resistance are not fully understood, especially in tree species such as Common ash …
-
Theoretical and experimental studies of dissimilar secondary metallurgy methods for improving steel cleanliness
… sets were collected to compare the effects of silicon, desulfurization rates, slag emulsification, slag evolution and inclusion evolution. By gaining the ability to gather multiple depths, it was determined that the slag emulsification has the ability to follow the flow pattern of the ladle …
-
Identifying, visualizing and quantifying process disturbances at SSAB Oxelösund using multivariate modelling
… as severe slopping heats have a titanium content in the incoming crude iron that is higher than average. Heats with too high phosphorous content after LD-treatment can be identified as having low silicon content in the crude iron, which makes it impossible to create the necessary slag …
-
Optimizations of Graphite Anode for High Capacity and High Power Usage
… study, we focused on investigating the effect of silicon amount in silicon graphite anode on the capacity and cycle life. We found that the capacity of the anode does not increase if silicon content exceeds 40% of the mass of active material. In the second study, we focused on the effect of …
-
EFFECTS AND LIMITATIONS OF RESIDUAL ALLOYING ELEMENTS IN SILICON SOLID SOLUTION STRENGTHENED FERRITIC DUCTILE IRON
… and 0.15% to 0.4% respectively while maintaining silicon in the 3.8%-4.3% range. The pearlite content and tensile properties were measured and analyzed. Using this data, a relationship connecting the copper, manganese, and silicon content in the iron to the pearlite content was developed and the …
-
Biological cycling of carbon, nitrogen and silicon in Arctic and sub-Arctic Marine waters: insights from phytoplankton studies in the laboratory and the field
… the cycling of carbon, nitrogen and silicon by marine polar diatoms through the aid of a field study and a laboratory study. Field studies were conducted along a transect from Victoria, Canada to Barrow, Alaska and particulate carbon, nitrogen and silicon, chlorophyll a, nitrate, …
Page 1 of 3