Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 70 for “"Simple beam"”.
-
Response of simple beam to spatially varying seismic excitation
Thesis (M.S.)--Michigan State University. Department of Civil and Environmental Engineering, 1988
-
Response of a Flexibly Supported Simple Beam to Dynamic Loads
Made available in DSpace on 2014-12-05T17:37:05Z (GMT). No. of bitstreams: 1 5904580.pdf: 3583591 bytes, checksum: ee570cbf27a520b4a58314ace2cfbd1f (MD5) Previous issue date: 1959
-
Strength and Stiffness of Energy Panel Structures Wood-framed Metal-clad Diaphragms
… in two different arrangements, cantilever and simple beam. In all, there were 29 diaphragms tested, 15 cantilever and 14 simple beam. For each series, a different fastener pattern was used along with different amounts of shear blocking. Screws were used to fasten the sheeting to the purlins and …
-
Accelerated Durability Characterization of Laminated Polycarbonate Systems
… is the wedge test, a type of double cantilever beam (DCB) test in which a constant deflection is applied to characterize Mode I fracture behavior. The crack growth in wedge test specimens with different TPUs is evaluated at various temperature and humidity conditions over time. Dynamic …
-
A study of modal-space control of a beam-cable structure: experiment and theory
… known as modal-space control, on a relatively simple beam-cable structure. The control was implemented in analog form and provided modal viscous damping in each of the three modes of the structure. Transient response to initial conditions was analyzed experimentally and theoretically. Control …
-
Numerical optimization algorithm for engineering problems using micro-computer.
… are in the design of machine components and simple beam and truss structures. Solutions to three sample problems are given.
-
Mechanical Characterization of Patterned Silver Columnar Nanorods with the Atomic Force Microscope.
… a square “lattice” of length 1 μm. An electron beam source was used as the evaporation method, creating the deposition flux which was oriented 85˚ from the substrate normal. A Dimension Icon with NanoScope V controller atomic force microscope was used to measure the spring constant in 10 nm …
-
Behavior of beam shear connections in steel buildings subject to fire
… investigations on the behavior of steel simple beam end framing connections subjected to fire. While significant progress has been made in understanding the overall structural response of steel buildings subject to fire, the behavior of connections under fire conditions is not well …
-
The effects of ship load variations and seastate on hull girder deflection and combat system alignment [manuscript]
… on the alignment of the vessel's combat system. Simple beam theory is applied for the structural portion of the analysis. Wave induced bending moments are determined by using a quasi-static approach with regular waves. Calculations and results are presented for theFFG7 calss of U.S. Navy …
-
Analysis of simply-supported single cell prismatic box sections
… methodology, the generalization of Vlasov's, simple beam theory, and its extension to evaluate torsional, distortional and shear lag effects in simply-supported girder consisting of a single cell uniform box section. The computer program developed can analyse simply supported box sections with …
-
Analysis, Design and Testing of a Wind Tunnel Model to Validate Fiber-Optic Shape Sensing Systems
… lattice method called Tornado combined with simple beam theories. The beam theories were linear beam theories and the stiffness of the composite bodies was supplied by static testing of the test articles. The code was iterative in that it ran the VLM code to estimate the forces and moments on …
-
Task Specific Humanoid Hand Design using Single Crystal Ultrasonic Motors
… is used as its driving element. Timonshenko's simple beam model is adopted to model the dynamics of the stator. The driving circuit for the ultrasonic motor includes a four-phase full bridge inverter and DC-DC converter, where the amplitude of driving voltage signals is chosen as the primary …
-
The effect of fines on oriented strandboard bending properties
… Mixtures; • The plank MOE can be modeled using simple beam bending theory; • The MOR (plank orientation) cannot be modeled using either Rule of Mixtures or simple beam bending theory • Failure mode in the plank orientation can be predicted (for these specific conditions); i.e., boards between 10 …
-
A Study Of The Beach Terraces On Muroto Peninsula, Island Of Shikoku, Southwestern Japan
… formation is developed which is a combination of simple beam theory and thrust fault elastic rebound theory. Axial stress drops of 320 to 425-bars are subtracted from axial loads which are applied to an initially downwarped 24 km thick lithosphere which overlies an asthenosphere of 10^19 poise …
-
Smart structure integrity monitoring using transient response.
… testing method was used to detect damage in a simple beam-like smart structure. In this study, two continuous beams perfectly connected, one of them equipped with a piezoceramic sensor and two piezoceramic actuators, were used to identify the changes in the boundary conditions. A …
-
An optimization method for the design of structures for maximum fundamental frequency
… by increasing the fundamental frequency of simple beam structures, truss structures, and complex structures. These examples include a support structure for a telescope, a support structure for a beam collapser, an airplane wing, and a truss railroad bridge. The MSD optimization method is …
-
Integrated structural design, vibration control, and aeroelastic tailoring by multiobjective optimization
… variables were derived for a finite element beam model of the structure and constant feedback gains determined by Independent Modal Space Control. Pareto optimal designs generated for a simple beam and a tetrahedral truss demonstrated the benefit of solving the integrated structural and …
-
Plane frame element addition to the MESS finite element program
… The element is tested for accuracy relative to simple beam theory and by comparison with results generated using another finite element program. In both cases agreement to within 6 significant figures was achieved. Because the intended use is educational, a survey of its benefit as a design aid …
-
Strength of beam-columns in flexibly connected steel frames.
… frames are reported. It is demonstrated that all beam to column connections have an inherent degree of stiffness and that their moment-rotation characteristics are non-linear. The load carrying capacity of columns, confined to buckle in-plane, is shown to be enhanced considerably by the resistance …
-
Large-scale testing of a steel-concrete composite floor system under column loss scenarios
… steel gravity framing systems composed of steel beams and girders with composite concrete slab on steel deck. Steel simple beam-column connection tests were conducted at the University of Washington, steel-concrete composite slab tests were conducted at Purdue University, and complete floor …
Page 1 of 4