Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Single mode waveguides"”.
-
Ion exchanged glass waveguides with efficient coupling to fibers and lasers
… In this thesis work two types of channel waveguides were designed and fabricated on BK7 glass substrate using a low-cost ion-exchange process. The first type of waveguide was formed in a simple sequence of ion-exchange and post-exchange annealing. These single mode waveguides had large …
-
Optical Waveguides and Structures for Short Haul Optical Communication Channels within Printed Circuit Boards
Optical waveguides have shown promising results for use within printed circuit boards. These optical waveguides have higher bandwidth than traditional copper transmission systems and are immune to electromagnetic interference. Design parameters for these optical waveguides are needed to ensure an …
-
The design and measurement of a microwave mode transducer.
A mode transducer to separate the TE(10) and TE(20) modes propagating in multimode waveguide and couple the power from each into single mode waveguides is described. The construction of an experimental model is shown and data on its performance given. The capabilities of this type of mode …
-
Metasurfaces integrated with a single-mode waveguide array for off-chip wavefront shaping
… the existing approach is to utilise wide slab waveguides. However, the inherent multi-mode characteristics of such wide slab waveguides make the device susceptible to modal distortion. To address this challenge, I have proposed a different approach that seamlessly integrates metasurfaces with …
-
Development of fabrication processes toward integrated photonics in III-V semiconductors - GaP and GaN
… to Si (Pockels effect).<br/>Simulations to find single mode waveguides in GaN and GaP, found waveguides with dimensions 1000 x 500 nm and 600 x 200 nm respectively. Single mode waveguides were found to avoid multimodal effects. With these waveguide dimensions, different switch designs were …
-
Crosstalk analysis of synchronous and asynchronous optical chip interconnects with direct detection
… analysis of optical chip interconnects via single-mode waveguides with synchronous transmission and asynchronous transmission. This crosstalk model is general and can be used for any type of waveguide network. Three cases of laser sources will be considered: (1) each channel operates with an …
-
Towards a Single-Mode Dispensed Polymer Optical Waveguide
Dispensed organic polymer optical waveguides suitable for single-mode operation were recently fabricated. Different dispensing pressures, polymers, and dispensing tips were used in the drawing method. The waveguides were measured to be approximately 16[mu] wide and 0.8[mu] tall. This is …
-
Degenerate four wave mixing in semiconductor doped glass waveguides.
… process within a planar waveguide. High quality single mode waveguides were fabricated from the semiconductor doped glass by K⁺-ion exchange. Four wave mixing was performed in the waveguide that produced a peak reflectivity of ≅.003, which is 8 orders of magnitude larger than that achieved …
-
Shades of Greyscale Tapers and Polymer Waveguides in Photonic Integrated Circuits
… methods using ultraviolet-irradiation, polymer waveguides are rapidly fabricated in dry films without the need for subsequent wet or dry etching. Depending on the composition of the polymer, the waveguide index contrast can range from 0.01 to 0.03, spanning indices from n=1.47 to 1.56. low-loss …
-
Design and simulation of integrated photonic devices based on tilted Bragg gratings
… in which optical components are integrated in a single photonic chip. This has a wide range of applications including in telecommunications, optical information processing and quantum computing. A highly flexible integrated photonics platform has previously been developed at the ORC for …
-
Novel mid-infrared quantum photonic component design in silicon: big photons for bigger systems
… photonic components on this platform – low-loss single-mode waveguides and bends, grating couplers, inverse taper edge couplers, directional couplers, and multimode interferometers – and characterise their performance. We then simulate, design, post-process and characterise a near-record …
-
Characterization and Power Scaling of Beam-Combinable Ytterbium-Doped Microstructured Fiber Amplifiers
… are characterized and power scaled. Fiber waveguides utilizing cladding microstructures to achieve wave guidance via the photonic bandgap (PBG) effect and a combination of PBG and modified total internal reflection (MTIR) have been proposed as viable single-mode waveguides. Such novel …
-
Fabrication and applications of zinc indiffused waveguides in periodically poled lithium niobate
… (SHG) devices based on zinc indiffused channel waveguides in periodically poled lithium niobate (PPLN) is reported in this thesis. The thesis covers all stages from the production of PPLN by domain inversion on a micron scale through to optical testing. The factors affecting poling quality, such …
-
Bangolaidžių integravimas į lydytą kvarcą panaudojant femtosekundinius šviesos impulsus /
… work investigates the possibility of writing waveguides inside fused silica by femtosecond direct writing technique using Yb:KGW solid state laser generating 320 fs pulses. It is shown that, by using slit beam shaping method, optimising laser pulse energy and focusing depth it is possible to …
-
Photoabsorption induced disordering of InGaAs-InGaAsP multiple quantum well structures for optoelectronic integration
… from intermixed material such as low-loss single mode waveguides, broad area oxide strip lasers, strip loaded ridge waveguide lasers and electroabsorption ridge waveguide modulators. These devices have been characterised which gives an indication as to how the optical and electrical …
-
Broadband Arrayed Waveguide Grating Multiplexers on InP
… for increasing the transmission using multimode waveguides is discussed. Traditionally, single mode waveguides are required in order to prevent higher order waveguide modes creating ghost images in the output spectrum. Using bend loss and waveguide junction offsets, higher order modes can be …
-
Design, Fabrication and Characterization of a Polymer Electro-Optic Modulator
… – a method that hasn’t been widely used in single-mode polymer waveguide production. The core layer of the device is made of a guest-host polymer system, where two chromphores, named Disperse Red1 (DR1) and C10 are doped into polycarbonate, respectively, to serve as the EO system. A 248nm …
-
Design and characterisation of a photonic sensor platform for the detection of biofilm formation
… an optical field distribution formed in optical waveguides and the resulting changes in the refractive index and absorption of this environment. The sensor platform and materials formulations were established from simulation studies conducted with the Olympios software. These simulations …
-
All-optical signal processes enhanced by multimode nonlinearities
… and in particular have been implemented in single mode waveguides for an array of applications. In these devices, FWM occurs between frequencies of light all of which propagate in the fundamental spatial mode. This thesis explores FWM in optical fibres when the interacting light fields are …
Page 1 of 2