Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Single-zone model"”.
-
Development and verification of a simplified building energy model
… a simplified and concise building simulation model suitable for high-level applications such as preliminary design or for embedding into adaptive control systems. An actual complex modern building and its energy system has been monitored. The monitored energy performance of this building has …
-
Προαναμεμειγμένη καύση κινητήρων ντήζελ
… initially involved the creation of a single-zone model followed by a new multi-zone model, both simulating the closed part of the engine cycle (compression, combustion and expansion). The single-zone model was used for the parametric investigation and the description of HCCI …
-
Physical Modeling and Control of Low Temperature Combustion in Engines
The topic of this thesis is model-based control of two combustion engine concepts, Homogeneous Charge Compression Ignition (HCCI) and Partially Premixed Combustion (PPC), using physics-based models. The studied combustion concepts hold promise of reducing the emission levels and fuel consumption of …
-
The Potential of Using Natural Gas in HCCI Engines: Results from Zero- and Multi-dimensional Simulations
… effect on the HCCI combustion, multi-zone models coupled with cold-flow CFD simulations are employed in addition to the single-zone model. The effects of non-homogeneous temperature and equivalence ratio stratification on the ignition timing, combustion phasing, and emissions formation …
-
An investigation of the fluid dynamics and heat transfer of high pressure flows in integrated gas delivery systems
… thesis presents the development of computational models that predict the thermal response during the fast filling of high-pressure gas storage cylinders with hydrogen or natural gas. The new computational models are validated and then used to assess a range of approaches for achieving rapid …
-
Enabling HCCI combustion of n-heptane through thermo-chemical recuperation
… and fuel reforming, two different HCCI models are developed and validated. The single-zone model allows for studying the effect of the secondary fuel on combustion timing. A more complex model, the multi-zone model, allows for studying the effect of secondary fuel on overall engine …
-
Development of an Open Source Hourly Building Energy Modeling Software Tool
… design of low-energy buildings. Building energy modeling is used to predict annual energy consumption, determine peak loads for sizing equipment, complete cost-payback analysis to select appropriate energy efficiency measures, and show compliance with standards. While energy modeling is a cost …
-
Reaction-based modeling and control of an electrically boosted diesel engine
This dissertation presents the reaction-based modeling of diesel combustion and model-based control of diesel engine air path.The dissertation first presents a control-oriented reaction-based diesel combustion model that predicts the time-based rate of combustion, in-cylinder gas temperature and …
-
Integrated processes for turbocharger design and retrofitting
… diesel engine simulation, utilizes 1D meanline models for T/C components, a single-zone model for the diesel engine and a T/C-diesel engine matching analysis. The diesel engine model is adapted to engine-specific data and the overall integrated model is validated against shop trials data, …
-
Exploring cosmic-ray acceleration in the galactic realm.
… within the Galaxy. We present a simple static, single-zone model of secondary electron and positron production from CR protons and heavier nuclei interacting with ambient matter. We then apply this model, assuming a local CR spectrum, to predict the synchrotron emission from two cold, dense, …