Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Singly-symmetric"”.
-
Inelastic stability of tapered, singly-symmetric beam-columns.
The purpose of this study is to determine the inelastic lateraltorsional buckling load of a linearly web-tapered member having unequal flanges and subjected to unequal end moments and axial load. Triangular residual stress patterns in flanges and uniform tensile stress across the web are assumed to …
-
Optimum Pick Point Locations for Straight, Singly Symmetric Steel Plate Girders
… buckling capacity of a suspended, non-prismatic, singly symmetric plate girders. The results show that a significant increase in stability occurs at the pick point location of 0.25L, where L is the span length. This recommendation can be utilized in the field to save construction cost and time …
-
Nonlinear rigid-plastic analysis of stiffened plates under blast loads
… is derived from modelling stiffened plates as singly symmetric beams or as grillages thereof. These beams are further assumed to behave in a rigid, perfectly plastic manner and to have piecewise linear bending moment-axial force capacity interaction relations, otherwise known as yield curves. A …
-
Advancing Cold-Formed Steel Portal Frame Design: An In-Depth Study of Seamed Box Sections, Eaves Connections, and Column Base Details
… of cold-formed steel (CFS) portal frames, increasingly favoured in regions such as New Zealand and Australia where minimal snow loading makes them a cost-effective alternative to traditional hot-rolled steel frames. The growing preference for CFS is supported by advancements in the cold-formed …
-
Behavior and design of concentrically loaded duplex stainless steel single equal-leg angle struts
… and flexural-torsional buckling strengths of singly symmetric stainless steel members. Finally, design criteria in the form of load and resistance factor design (LRFD) with a reliability index of 3 for buckling limit states are proposed for possible adoption in future US national standards.
-
Inelastic behaviour of steel beam-columns
… uniform along the length, and may be doubly or singly symmetric. Ultimate loads can be obtained by increasing some or all components of the loads. The analysis can be made with or without considering residual stresses and torsion effects. The analysis essentially consists of obtaining …
-
Structural analysis and optimized design of general nonprismatic I-section members
… and/or stepped cross-sections) as well as singly-symmetric cross-sections have been commonly employed. Fabricators equipped to produce web-tapered members can create a wide range of optimized members from a minimal stock of different plates and coil. Linearly tapered web plates can be …
-
Behavior and design of metal building frames using general prismatic and web-tapered steel I-section members
… prismatic and web-tapered members with doubly-symmetric and/or singly-symmetric cross sections. Until recently, the base U.S. provisions for design of frames with web-tapered members were provided in the AISC ASD (1989) and LRFD (1999) Specifications. Unfortunately, these previous AISC …
-
Finite deflection dynamic response of axially restrained beams
The deformation response of symmetrically supported, axially restrained beams subjected to uniformly distributed pulse loads is studied herein, leading to the development of an analytical procedure to predict the character and magnitude of such response. The procedure is valid for beams of any …
-
Parametric Finite Element Simulation Studies Investigating the Lateral-Torsional Buckling Capacity of Built-Up Steel I-Section Members
Current American and international approaches for the design evaluation of general built-up steel I-section flexural members against lateral-torsional buckling (LTB) have been well established for many years. Nevertheless, the differences in nominal strength predictions from various prominent …