Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Sintered Ceramic"”.

  1. The Effect of Austenitization Temperature on the Microstructure, Bend Properties, and Hardness of a Chrome-Bearing White Cast Iron

    … an existing line of research into cast metal-ceramic lattices using chrome white iron as a substitute for sintered ceramic tiles used to defeat projectiles. Chrome-bearing white irons have a substantial quantity of chromium carbides, giving them high hardness and abrasion resistance. …

    vt Repository record for The Effect of Austenitization Temperature on the Microstructure, Bend Properties, and Hardness of a Chrome-Bearing White Cast Iron (opens in a new tab)

  2. Flow Fields and Particle Trajectories in Abrasive Slurry-jet Micro-machining of Sintered Ceramics and Metallic-layered Structures

    The extreme hardness of sintered ceramics makes it difficult to machine them economically. Abrasive slurry-jet micro-machining (ASJM), in which a target is eroded by the impingement of a micro-jet of water containing fine abrasive particles, is a low-cost alternative for micro-machining of sintered …

    toronto-retro Repository record for Flow Fields and Particle Trajectories in Abrasive Slurry-jet Micro-machining of Sintered Ceramics and Metallic-layered Structures (opens in a new tab)

  3. Growth by pulsed laser deposition and characterisation of zinc oxide thin films and nanostructures

    … nm and with a 6 ns pulse width was fired at a sintered, ceramic target to produce an expanding plume of ZnO into a vacuum chamber (pressures in the 10−1 mbar range). The plume material condenses on various substrates, chiefly sapphire, to form a thin film. The samples were analysed using a …

    dcu Download PDF for Growth by pulsed laser deposition and characterisation of zinc oxide thin films and nanostructures (opens in a new tab)

  4. Design and Performance of Metal Matrix Composite Composed of Porous Boron Carbide Created by Magnetic Field-Assisted Freeze Casting Infiltrated with Aluminum (A356)

    … freeze-casting was used to create porous B4C ceramic preforms. An optimum slurry consisted of a mixture of B4C powders with 6 wt.% Er2O3 powder in an H2O-PVA solution and was cooled at a rate of 1 °C/min from room temperature to -30 °C resulting in porous green state ceramic preform with …

    unt Repository record for Design and Performance of Metal Matrix Composite Composed of Porous Boron Carbide Created by Magnetic Field-Assisted Freeze Casting Infiltrated with Aluminum (A356) (opens in a new tab)

  5. Enhancing Cnt-composites With Raman Spectroscopy

    … multiwalled nanotube (MWNT) composite and laser-sintered ceramic-MWNT composite. In the first application, the evolution of the MWNT microstructure throughout a functionalization and processing of the polymerMWNT composite was monitored using the G peak position and D/G intensity ratio. …

    ucf Repository record for Enhancing Cnt-composites With Raman Spectroscopy (opens in a new tab)

  6. Improving the Figure of Merit in N-Type Thermoelectric Oxides Using Low Temperature Synthesis and Cold Sintering

    … allows nano-scale grains to be retained in a sintered ceramic, increasing the density of grain boundaries which scatter phonons. Nanoscale particles are produced using by ionic liquid synthesis method, what’s more a new compositional series was made using this method: La0.15-xEuxSrTiO3. The …

    whiterose Download PDF for Improving the Figure of Merit in N-Type Thermoelectric Oxides Using Low Temperature Synthesis and Cold Sintering (opens in a new tab)

  7. Flux line cutting and cross-flow in tubes of high T(c) superconductors.

    … enter and leave the wall of hollow cylinders of sintered high superconductors at T$\sb{\rm c}$ 77 K, hence cut and traverse each other. Tubes of two different materials, denoted BiSCCO and YBCO, have been studied. The evidence for flux line cutting and cross-flow is examined in the perspective of …

    ottawa-retro Repository record for Flux line cutting and cross-flow in tubes of high T(c) superconductors. (opens in a new tab)

  8. Aligned Continuous Cylindrical Pores Derived from Electrospun Polymer Fibers in Titanium Diboride

    … range ordering of the porous structures of the sintered ceramic. Green bodies were formed by vacuum infiltrating an electrospun-fiber-filled mold with the colloidal TiB2 suspension. The size, volume, distribution, and dispersion of the pores were optimized by carefully selecting the sacrificial …

    vt Repository record for Aligned Continuous Cylindrical Pores Derived from Electrospun Polymer Fibers in Titanium Diboride (opens in a new tab)

  9. Aqueous suspension plasma spraying of yttria stabilized zirconia solid oxide fuel cell electrolytes

    … however, current state-of-the-art wet ceramic fabrication techniques make SOFC manufacturing labour-intensive, fairly expensive and difficult to automate, and the high firing temperatures required limit the usable materials sets and increase production times. Plasma spraying (PS) is a …

    ubc Repository record for Aqueous suspension plasma spraying of yttria stabilized zirconia solid oxide fuel cell electrolytes (opens in a new tab) Download PDF for Aqueous suspension plasma spraying of yttria stabilized zirconia solid oxide fuel cell electrolytes (opens in a new tab)

  10. Pulsed laser deposition of doped sesquioxide films for planar waveguide lasers

    … requiring a melt of material to grow from. Sintered ceramic targets of the sesquioxides, often doped with rare-earth ions, are ablated with a UV laser pulse and material is ejected. This plume of material travels through a vacuum chamber to a carefully chosen substrate where material is …

    soton Download PDF for Pulsed laser deposition of doped sesquioxide films for planar waveguide lasers (opens in a new tab)

  11. Fabrication and Characterization of Miniaturized Components Based on Extruded Ceramic-Filled Polymer Blends

    … manufacturing process for microstructured ceramic components that is based on co-extrusion. Co-extrusion of structured feedrods holds promise for development of multi-layered, functionally graded and/or textured structures. However, it requires a polymer binder that is difficult to remove …

    lsu-thes Repository record for Fabrication and Characterization of Miniaturized Components Based on Extruded Ceramic-Filled Polymer Blends (opens in a new tab)

  12. Multi-mode cavity effects in the microwave heating of a ceramic slab

    … into hot spot development in microwave heated ceramics, a partially insulated, two dimensional ceramic slab situated in a TE_{M01} cavity is modeled in the small Biot number limit. If the electrical conductivity is an exponential function of temperture and E_0 is the strength of the incident …

    njit Repository record for Multi-mode cavity effects in the microwave heating of a ceramic slab (opens in a new tab)

  13. A Comparison of Microstructure and Uniaxial Compressive Response of Ice-Templated Porous Alumina Scaffolds Fabricated from Two Different Particle Sizes

    … bio-inspired highly porous (>50 vol.%) cellular ceramics is crucial to meet the demand of high-performance lightweight and damage-tolerant materials for a number of cutting-edge applications including impact energy absorption, biomedical implants, and energy storage. A key design feature that is …

    odu Repository record for A Comparison of Microstructure and Uniaxial Compressive Response of Ice-Templated Porous Alumina Scaffolds Fabricated from Two Different Particle Sizes (opens in a new tab)

  14. Fabrication and characterisation of complex shaped Si-Al-O-N ceramic components via additively manufactured moulds

    … applications. SiAlONs are alloys of Si3N4 ceramics and offer the combination of good mechanical strength and chemical inertness together with the ability to perform at temperatures up to ~1400\(^o\)C. Although a lot of progress has been made for the fabrication of dense Si3N4 (and its …

    birmingham Download PDF for Fabrication and characterisation of complex shaped Si-Al-O-N ceramic components via additively manufactured moulds (opens in a new tab)

  15. Engineered Nanocomposite Materials for Microwave/Millimeter-Wave Applications of Fused Deposition Modeling

    … of high-permittivity (high-k) and low-loss ceramic-thermoplastic composite materials as fused deposition modeling (FDM) feedstock, based on cyclo-olefin polymer (COP) embedded with sintered ceramic fillers, have been developed and investigated for direct digital manufacturing (DDM) of …

    usf Repository record for Engineered Nanocomposite Materials for Microwave/Millimeter-Wave Applications of Fused Deposition Modeling (opens in a new tab)

  16. Densification of Na-ion compounds by conventional and cold sintering

    … assemblage, morphology and conductivity of cold sintered samples were investigated using a combination of Archimedes/geometric density measurement, XRD, SEM and impedance spectroscopy. Furthermore, the impact of post-annealing on the morphology and conductivity of the cold-sintered NZSP ceramics …

    whiterose Download PDF for Densification of Na-ion compounds by conventional and cold sintering (opens in a new tab)