Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Sintering Additive"”.

  1. Application of Artificial Neural Nets to a Selective Laser Sintering Additive Manufacturing Process For Fault Detection

    … The data was collected in-situ during the metal additive manufacturing of a Heat Exchanger section, comprised of a series of conformal channels. Specifically, a shallow artificial neural net (ANN) was trained with high-resolution powder bed surface height data from a laser profilometer and then …

    ut-knoxville Repository record for Application of Artificial Neural Nets to a Selective Laser Sintering Additive Manufacturing Process For Fault Detection (opens in a new tab)

  2. Development of near net shaped Si3N4/SiC composites with optimised grain boundary phase for industrial wood machining

    … shape processing route including gas pressure sintering. These newly developed tools show less abrasive wear and consequently twice as long lifecycles than commercial standard tungsten carbide tools. Microscopic properties determine the performance of the Si3N4/SiC cutting tools. Therefore, an …

    qucosa-diss

  3. Shock isolation performance of a negative stiffness honeycomb with an integrated fluid damping system

    … honeycomb was created using the Selective Laser Sintering additive manufacturing process. A latex rubber diaphragm with a differential check valve system was adhered to the open ends of the honeycomb. The honeycomb was subjected to shock loadings using a drop-test apparatus, and the flow control …

    texas Repository record for Shock isolation performance of a negative stiffness honeycomb with an integrated fluid damping system (opens in a new tab)

  4. Self-healing effects of copper on 3-D printed 420 stainless steel

    … added to improve the self-healing property. The sintering additive of 0.5% of boron was found to improve the final density dramatically and reduce the sintering temperature, enabling us to improve the mechanical properties. This boron additive was used to print the Fe-Cu alloys. After the …

    msu

  5. Yttrium disilicate as environmental barrier coating for silicon nitride-based glow plug

    … available Si₃N₄-based GPs, the use of Y₂O₃ as sintering additive results in the in-service formation of yttrium silicates on their ceramic pins. Therefore, taking the chemical compatibility into consideration, yttrium disilicate coating was chosen to provide corrosion protection for such GPs. A …

    ubc Repository record for Yttrium disilicate as environmental barrier coating for silicon nitride-based glow plug (opens in a new tab) Download PDF for Yttrium disilicate as environmental barrier coating for silicon nitride-based glow plug (opens in a new tab)

  6. Degradation of silicon nitride glow plugs in electric field-experiments and modeling

    … the influence of constant electric load (DC) the sintering aid (Yb₂O₃) cations continuously migrate away from the high potential side of the heating elements following the electric field pattern. A 2D mathematical model was developed to simulate the redistribution of the sintering additive (Yb₂O₃) …

    ubc Repository record for Degradation of silicon nitride glow plugs in electric field-experiments and modeling (opens in a new tab) Download PDF for Degradation of silicon nitride glow plugs in electric field-experiments and modeling (opens in a new tab)

  7. Innovative sinter processing of non-oxide CMC materials

    … require very expensive machining. Pressureless sintering of CMC preforms to near net shape is a preferred alternative, greatly reducing costs and allowing the formation of complex component geometry. However, there are major technical difficulties. Densification by infiltration of vapour or …

    dcu Download PDF for Innovative sinter processing of non-oxide CMC materials (opens in a new tab)

  8. Processing for Improved Creep Behavior of Ultra-High Temperature Ceramics

    … ZrB2 was successfully densified by pressureless sintering to near full density at temperatures as low as 1850°C, with the addition of B4C as sintering additive. An experimental phase diagram was approximated as the samples were produced. Second, using a combination of density functional theory …

    houston Repository record for Processing for Improved Creep Behavior of Ultra-High Temperature Ceramics (opens in a new tab)

  9. The synthesis and characterisation of ceramic composites and A-site deficient perovskites as dielectrics for multi-layer ceramic capacitors

    … to retain compositional heterogeneity post sintering due to the thermodynamic stability of relaxor components of the NNBT solid solution. X7R rated TCC is achieved for a BT-60NNBT composite with a 80:20 wt.% phase fraction, with a room temperature permittivity magnitude over 2000 and tan δ …

    whiterose Download PDF for The synthesis and characterisation of ceramic composites and A-site deficient perovskites as dielectrics for multi-layer ceramic capacitors (opens in a new tab)

  10. Role of impurities, LiF, and processing on the sintering, microstructure, and optical properties of transparent polycrystalline magnesium aluminate (MgAl2O4) spinel, The

    … and processing parameters. In addition, the LiF sintering additive typically required to impart transparency degrades optical and mechanical properties, precluding wider application. Furthermore, there remains a fundamental lack of understanding of the processing-structure-property relationships …

    colo-mines Repository record for Role of impurities, LiF, and processing on the sintering, microstructure, and optical properties of transparent polycrystalline magnesium aluminate (MgAl2O4) spinel, The (opens in a new tab)

  11. Tiesioginio metalo lazerinio sukepinimo technologijos optimizavimas ir bimetalinių struktūrų formavimas /

    Direct Metal Laser Sintering (DMLS) technology enables the fabrication of metal components with complex geometry; however, its application is limited by defect formation in alloys and challenges in microstructural control, particularly when forming bimetallic structures. This dissertation …

    vilnius Repository record for Tiesioginio metalo lazerinio sukepinimo technologijos optimizavimas ir bimetalinių struktūrų formavimas / (opens in a new tab)

  12. Understanding lubrication mechanisms in Engineered Al2O3-B2O3 Composites

    … Also, the formation of aluminum borate during sintering generated porosity in the Al2O3-B2O3 composite. One of the methods to reduce the porosity in the Al2O3-B2O3 composite is the incorporation of sintering additives. In this work, CuO and CaO were selected as sintering additive due to their …

    unr Repository record for Understanding lubrication mechanisms in Engineered Al2O3-B2O3 Composites (opens in a new tab)

  13. Additive manufacturing using polyamide-12 /

    Summary Laurynas Peciukonis ADDITIVE MANUFACTURING USING POLYAMIDE-12 Selective laser sintering even being quite an old additive manufacturing technology, remains quite expensive to this day, due to the higher complexity of the equipment construction than comparing it to other additive …

    vilnius Repository record for Additive manufacturing using polyamide-12 / (opens in a new tab)

  14. Fabrication and Characterization of Nonlinear Optical Ceramics for Random Quasi-Phase-Matching

    A number of technologies rely on the conversion of short laser pulses from one spectral domain to another. Efficient frequency conversion is currently obtained in ordered nonlinear optical materials and requires a periodic spatial modulation of their nonlinear coefficient which results in a narrow …

    ucf Repository record for Fabrication and Characterization of Nonlinear Optical Ceramics for Random Quasi-Phase-Matching (opens in a new tab)

  15. Σχεδιασμός, ανάπτυξη και μελέτη νέων ηλεκτρολυτών και ηλεκτροκαταλυτών για κυψελίδες καυσίμου στερεού οξειδίου ενδιάμεσων και χαμηλών θερμοκρασιών

    … was found that the introduction of the specific sintering additives in small compositions (1 mol% in the B position) reduces both _alcinations and sintering temperature by ~250οС and ~150οС, respectively, promoting simultaneously the densification process. The relative density of the co-doped …

    greece Repository record for Σχεδιασμός, ανάπτυξη και μελέτη νέων ηλεκτρολυτών και ηλεκτροκαταλυτών για κυψελίδες καυσίμου στερεού οξειδίου ενδιάμεσων και χαμηλών θερμοκρασιών (opens in a new tab)

  16. Pokročilé keramické materiály a kompozity s kombinací funkčních vlastností

    … rychlostech ohřevu a analýza pomocí Master Sintering Curve/Master Shrinkage Curve. Přínosem této práce je systematické porovnání kinetiky slinování a aktivačních energií za stejných podmínek kinetické analýzy u částicových a vícevrstvých kompozitů Al2O3/ZrO2 připravených pomocí jednotné …

    brno-tech Repository record for Pokročilé keramické materiály a kompozity s kombinací funkčních vlastností (opens in a new tab)

  17. Optimization Studies for the Gas Atomization and Selective Laser Melting Processes of Al10SiMg alloy

    Selective laser melting (SLM) is an additive manufacturing technology that can fabricate complex engineering components using a scanning laser beam to melt consecutive layers of powders with characteristics that significantly influence material properties. Present work investigates both the gas …

    ucf Repository record for Optimization Studies for the Gas Atomization and Selective Laser Melting Processes of Al10SiMg alloy (opens in a new tab)

  18. Fire retardant polyamide 11 nanocomposites/elastomer blends for selective laser sintering

    Additive manufacturing (AM) had previously been used solely for prototyping and visualization purposes, but in recent years, this technique has shifted to the idea of producing end-use parts. This has already been successfully done in some areas via selective laser sintering (SLS). Unfortunately, …

    texas Repository record for Fire retardant polyamide 11 nanocomposites/elastomer blends for selective laser sintering (opens in a new tab)

  19. Sustainability and thermal aspects of polymer based laser sintering

    Additive Manufacturing (AM) processes which include Selective Laser Sintering (SLS) have experienced tremendous growth and development since their introduction over 20 years ago. It becomes highly important at this stage to evaluate the sustainability of the process and refine it to reduce energy …

    texas Repository record for Sustainability and thermal aspects of polymer based laser sintering (opens in a new tab)

  20. Onset of selective laser flash sintering in 8YSZ

    Flash sintering of ceramics is distinguished by rapid sintering during simultaneous application of electric field and heat. Previous studies of flash sintering have been conducted in furnace environments, where sample temperatures are approximately uniform. Selective Laser Flash Sintering (SLFS) …

    texas Repository record for Onset of selective laser flash sintering in 8YSZ (opens in a new tab)

Page 1 of 2