Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Sintering Additives"”.

  1. Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds

    … with small quantities of MgO, ZnO and SiO2 as sintering additives. Nanocrystalline powder was selected, as it possesses outstanding properties over conventional coarse-grained powders due to reduced grain size. Nanocrystalline anatase powder of size 5-15 nm was synthesized via a simple sol-gel …

    ucf Repository record for Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds (opens in a new tab)

  2. Synthesis And Characterization Of Nanocrystalline Hydroxyapatite Powder; And The Effects Of Oxide-based Sintering Additives On Tricalcium Phosphate

    … small quantities of single and multi-oxide sintering additives in TCP, to study their influence on sintering behavior, densification, mechanical properties and biodegradation/ biomechanical properties in vitro. Through this research, I could improve mechanical performance of …

    ucf Repository record for Synthesis And Characterization Of Nanocrystalline Hydroxyapatite Powder; And The Effects Of Oxide-based Sintering Additives On Tricalcium Phosphate (opens in a new tab)

  3. Combined dilatometry and mass spectrometry of sintering and evolved gases of barium titanate and zirconium diboride with sintering additives

    … is used to monitor the gas phase species and sintering progress in real time during the heating of barium titanate and ultra high temperature ceramics (UHTCs), including zirconium diboride and sintering additives. For loose powder and pressed samples of barium titanate heated at different …

    missouri Repository record for Combined dilatometry and mass spectrometry of sintering and evolved gases of barium titanate and zirconium diboride with sintering additives (opens in a new tab)

  4. Development of near net shaped Si3N4/SiC composites with optimised grain boundary phase for industrial wood machining

    … shape processing route including gas pressure sintering. These newly developed tools show less abrasive wear and consequently twice as long lifecycles than commercial standard tungsten carbide tools. Microscopic properties determine the performance of the Si3N4/SiC cutting tools. Therefore, an …

    qucosa-diss

  5. Perspirable skin : thermal buckling achieved by complex functionally graded materials

    … influences of both nanopowders and oxides sintering additives on the final mechanical properties of ceramic samples are discussed. The final sintered density can be improved by introducing the nanopowders due to its large surface area, while the oxides sintering additives can also help the …

    msu Repository record for Perspirable skin : thermal buckling achieved by complex functionally graded materials (opens in a new tab)

  6. Microstructure development, compositional/physical gradient formation and related mechanical properties of gas-pressure-sintered silicon nitride ceramics

    … in bulk silicon nitride, (2) the effect of sintering parameters on microstructure development during the high-temperature sintering stage and the resulting mechanical properties, and (3) an investigation of β-Si<sub>3</sub>N<sub>4</sub> nucleation and initial stage microstructure …

    utk-theses Repository record for Microstructure development, compositional/physical gradient formation and related mechanical properties of gas-pressure-sintered silicon nitride ceramics (opens in a new tab)

  7. New approaches to improving structural integrity in binder jetting printing (BJP) process and developing advanced applications by combining BJP and powder metallurgy techniques

    … of the average particle size, mixture ratio, and sintering additives on the densities of green and sintered parts is investigated for SS420 and SS 316L powders. Multiple powders distinct in average particle sizes are mixed to improve the packing density. A systematic study of the binder burn-out …

    msu Repository record for New approaches to improving structural integrity in binder jetting printing (BJP) process and developing advanced applications by combining BJP and powder metallurgy techniques (opens in a new tab)

  8. Processing-Structure-Property Relationships of Spark Plasma Sintered Boron Carbide and Titanium Diboride Ceramic Composites

    … of both B4C and B4C-TiB2 composites without sintering additives, residual phases, e.g., graphite, and excessive grain growth due to long sintering times. A selection of composite compositions in 20% TiB2 feedstock powder increments from 0% to 100%, was sintered at 1900°C for 25 minutes hold …

    unt Repository record for Processing-Structure-Property Relationships of Spark Plasma Sintered Boron Carbide and Titanium Diboride Ceramic Composites (opens in a new tab)

  9. Inert refractory systems for casting of titanium alloys

    … the new face coats should also have excellent sintering properties, chemical inertness, surface finish and be easy to prepare. The processes of developing the new slurry started with the filler powder investigation by adding different sintering additives into the yttria powder to achieve good …

    birmingham Download PDF for Inert refractory systems for casting of titanium alloys (opens in a new tab)

  10. Estudo sobre o efeito dos parâmetros de processamento dos pós e sinterização do aço inox 316l reforçado com NbC

    … to the study of 316L stainless steel sintering aiming to study their behavior in the milling process and the effect of isotherm temperature on the microstructure and mechanical properties. The 316L stainless steel is a widely used alloy for their high corrosion resistance property. …

    brazil-ufrn Repository record for Estudo sobre o efeito dos parâmetros de processamento dos pós e sinterização do aço inox 316l reforçado com NbC (opens in a new tab)

  11. Processing and characterization of boron carbide-hafnium diboride ceramics

    … of boron carbide and carbon as HfB₂ sintering additives was systematically evaluated. In the first stage of the research, boron carbide and carbon additives were found to improve the densification behavior of milled HfB₂ powder in part by removing oxides at the HfB₂ surface during …

    must-thes Repository record for Processing and characterization of boron carbide-hafnium diboride ceramics (opens in a new tab)

  12. Investigation of Refractory Carbide Behavior in Flowing Hydrogen at Very High Temperatures Relevant for Nuclear Thermal Propulsion Applications

    … than pure SiC, due to preferential attack of sintering additives (Al<sub>2</sub>O<sub>3</sub> and Y<sub>2</sub>O<sub>3</sub>). High purity TiC and ZrC coupons exhibited acceptable hydrogen compatibility for all temperatures. Use of SiC, produced with current NITE manufacture technology, as a …

    utk-theses Repository record for Investigation of Refractory Carbide Behavior in Flowing Hydrogen at Very High Temperatures Relevant for Nuclear Thermal Propulsion Applications (opens in a new tab)

  13. Pressureless Sintering and Mechanical Properties of SiC Composites with in-situ Converted TiO2 to TiC

    … composite system were studied. Pressureless sintering experiments were conducted on samples containing 0 to 30 vol % TiC created through an in-situ reaction between TiO2 and C: TiO2 + 3C -> TiC + 2CO. Sintering of the compacts was carried out in the presence of Al2O3 and Y2O3 sintering …

    queens Repository record for Pressureless Sintering and Mechanical Properties of SiC Composites with in-situ Converted TiO2 to TiC (opens in a new tab)

  14. Micro selective laser sintering of silicon carbide

    … for the production of fully dense parts without sintering aids or external pressure. These difficulties can be bypassed with the implementation of selective laser sintering, which enables the generation of complex-shape, high-resolution SiC parts with structural integrity. Current sintering …

    texas Repository record for Micro selective laser sintering of silicon carbide (opens in a new tab)

  15. Polymer Derived Silicon Carbide Ceramics for Nuclear Applications

    … of PDCs also made possible the addition of sintering additives at the molecular level through a hydroboration reaction of SMP-10 with decaborane. This allowed the boron additives to be contained within the SiC grains, as opposed to on the grain boundaries, as is observed in traditional …

    washington Repository record for Polymer Derived Silicon Carbide Ceramics for Nuclear Applications (opens in a new tab)

  16. Microstructure-Mechanical Properties Relations in Pressureless Sintered SiC-TiB2 Composite Ceramics

    … SiC-TiB2 composite were studied. Pressureless sintering experiments were carried out on samples containing 0 to 50 vol % of TiB2 created by an in-situ reaction between TiO2 and C: 2TiO2 + B4C + 3C 2TiB2 + 4CO Al2O3 and Y2O3 were used as sintering additives to create a liquid phase and promote …

    queens Repository record for Microstructure-Mechanical Properties Relations in Pressureless Sintered SiC-TiB2 Composite Ceramics (opens in a new tab)

  17. Erosion and rolling contact wear mechanisms in silicon nitride hybrid bearings.

    … Silicon nitride rolling elements with different sintering additives, properties and microstructure were experimentally studied to understand the nature of cavitation erosion. Advanced surface analysis technique was used study the erosive wear correlation to microstructure of test materials. …

    bournemouth Download PDF for Erosion and rolling contact wear mechanisms in silicon nitride hybrid bearings. (opens in a new tab)

  18. Processing of Silicon Nitride Ceramics Produced by Spark Plasma Sintering

    … of powders extremely difficult; thereby, sintering additives are necessary to promote liquid phase sintering processes. Compaction of ceramic powders was carried out using a spark plasma sintering (SPS) furnace by utilizing a pulsed direct current through a conductive graphite die that …

    arizona-thes Repository record for Processing of Silicon Nitride Ceramics Produced by Spark Plasma Sintering (opens in a new tab)

  19. Quantification of Non-stoichiometry and Impurities in Transparent YAG Ceramics by Laser-induced Breakdown Spectroscopy (LIBS)

    … high optical grade ceramics by route of powder sintering, relies on a controlled set of techniques preventing the formation of scattering centers (pores and secondary phases) and harmful point defects (color centers, charge-carrier trapping sites). This thesis work investigates a novel approach …

    ucf Repository record for Quantification of Non-stoichiometry and Impurities in Transparent YAG Ceramics by Laser-induced Breakdown Spectroscopy (LIBS) (opens in a new tab)

  20. Influence of low nitrogen gas pressures (< 1.0 MPa) and additives on the nitridation, formation and densification of B and O-SiAlON ceramics produced by reaction bonding and silicothermal reduction

    … alternative to the traditional liquid phase sintering typically employed to produce SiAlONs. The influence of the initial compositions and of different additives on the nitridation behaviour and SiAlON phase formation have been studied. All of the additives did not have the same effects on …

    auckland-ms Repository record for Influence of low nitrogen gas pressures (< 1.0 MPa) and additives on the nitridation, formation and densification of B and O-SiAlON ceramics produced by reaction bonding and silicothermal reduction (opens in a new tab)

Page 1 of 2