Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Sintering Aids"”.
-
Mixed oxides as sintering aids for silicon nitride
Includes bibliographical references (pages 194-202).
-
Enhanced Mechanical Properties of Bulk Boron Carbide with Sintering Aids
… In spite of its promising characteristics, sintering of boron carbide powders into high density compacts has been a great challenge for ceramic research scientists for decades due to the nature of its covalence bonding. Generally, pure boron carbide can only be sintered to a density less …
-
Flash sintering of silicon carbide with boron and carbon sintering aids
… were to assess the feasibility of using flash sintering to manufacture silicon carbide and to understand how the technique affects its density, microstructure and mechanical properties.</p> <p>An experimental apparatus was developed that allowed silicon carbide bar shaped specimens with boron …
-
Investigation of Refractory Carbide Behavior in Flowing Hydrogen at Very High Temperatures Relevant for Nuclear Thermal Propulsion Applications
… than pure SiC, due to preferential attack of sintering additives (Al<sub>2</sub>O<sub>3</sub> and Y<sub>2</sub>O<sub>3</sub>). High purity TiC and ZrC coupons exhibited acceptable hydrogen compatibility for all temperatures. Use of SiC, produced with current NITE manufacture technology, as a …
-
Effect of sample processing on percolated Al₂O₃-SiCw Composites
… specimens containing different amounts of sintering aids were hot pressed and spark plasma sintered. The microstructure and electrical properties were compared.
-
Combined dilatometry and mass spectrometry of sintering and evolved gases of barium titanate and zirconium diboride with sintering additives
… is used to monitor the gas phase species and sintering progress in real time during the heating of barium titanate and ultra high temperature ceramics (UHTCs), including zirconium diboride and sintering additives. For loose powder and pressed samples of barium titanate heated at different …
-
Efeito da Gália como aditivo de sinterização em eletrólitos cerâmicos à base de céria sintetizados pelo método de complexação de cátions
… the effect of gallium oxide (Gallia) as a sintering aid in Eu doped ceria ceramic electrolytes since this effect has already been investigated for Gd, Sm and Y doped ceria electrolytes. The desired goal with the use of a sintering aid is to reduce the sintering temperature aiming to produce …
-
Low temperature sintering of antiferroelectric ceramics with ZnO and CuO as additive
… such as voids and microcracks. It is known that sintering temperature has a significant effect on the grain size, and smaller grain size may mitigate the mismatch among the grains with low crystallographic symmetry thereby reduce the voids and microcracks in the materials. We hypothesize that by …
-
Sintering of Co2MnO4 spinel for protective coatings in SOFC
… size were correlated with thermal behaviour, sintering temperature and achieved density. It was found that regardless the synthesis process the only obtained phase is Co2MnO4. Specific surface area from 0,8 to 65 m2g-1 was obtained, depending on the synthesis method. Sintering aids such as …
-
Processing of ceramic matrix composite using microwave energy
… related to the microwave internal volumetric sintering mechanism. The investigation also showed that without using sintering aids there was an amorphous layer on most of the alumina grain boundaries although the sintering temperature was 400 to 500°C lower than the melting temperature of the …
-
Microstructural optimization of solid-state sintered silicon carbide
… throughout the microstructure) were used as sintering aids. SiC batches between 0.25-4.00 wt.% carbon were mixed and spray dried. Cylindrical pellets were pressed at 13.7 MPa, cold-isostatically pressed (CIP) at 344 MPa, sintered under varying sintering soaking temperatures and heating rates, …
-
PTCR Effect in La2CO3 Doped BaTiO2 Ceramic Sensors
… (BaTiO3) for PTCR behaviour through solid-state-sintering route, at 1100°C, 1350°C. Two batches of samples were fabricated at low and high sintering temperatures of 1100°C, 1350°C respectively. The effect of different concentrations of donor dopant on BaTiO3 on the electrical properties of …
-
Micro selective laser sintering of silicon carbide
… for the production of fully dense parts without sintering aids or external pressure. These difficulties can be bypassed with the implementation of selective laser sintering, which enables the generation of complex-shape, high-resolution SiC parts with structural integrity. Current sintering …
-
ANALYZING ADVANCED COMPOSITE SHIELD MATERIALS FOR FUSION AND SPACE REACTOR APPLICATIONS
… first research thrust involved identification of sintering aids for reducing the sintering temperature of HfH<sub>2</sub>-ceramic matrix in order to suppress hydrogen dissociative loss from the HfH<sub>2</sub> particles during consolidation. The second research thrust involved quantification of …
-
HIGH PERFORMANCE PIEZOELECTRIC MATERIALS AND DEVICES FOR MULTILAYER LOW TEMPERATURE CO-FIRED CERAMIC BASED MICROFLUIDIC SYSTEMS
… piezoelectric compositions which have similar sintering conditions to LTCC materials; 2) reducing elemental inter-diffusion between the LTCC package and PZT materials in co-firing process; and 3) developing active piezoelectric layers with desirable electric properties. The goal of present work …
-
Processing and nanostructure influences on mechanical properties of thermoelectric materials
… PbS or PbSe matrix have been reported.Changes in sintering behavior of the skutterudite with the Ag nanoparticle additions were explored. Possible liquid phase sintering, with associated benefits in lower processing temperature, faster densification and lower cost, has been shown. A technique has …
-
Improving hardness and toughness of boride composites based on AlMgB14
… of pure TiB2 ceramics. A combination of sintering aids, pressure, and temperatures of 1800°C are often required to achieve near full density articles. The AlMgB14--TiB2 composites can achieve 99% density from hotpressing at 1400°C. This is mostly due to the preparation of powders by a …
-
Sintering methodologies for silicon carbide ceramics
… temperature creep, and chemical inertness. Sintering of powder compacts has been via both eutectic liquid-phase and solid-state processes; both were investigated in this study. Solid-state sintering, following the method of Prochazka, requires both carbon and boron (or B4C) sintering aids. …
-
Fabricating Complex-Shaped Components by Room-Temperature Injection Molding of Aqueous Ceramic Suspension Gels
… and machinability prior to binder removal and sintering, and increasing PVP content was observed to enhance green machinability. Alumina rings with high green densities (60-63% true density (TD)) as found using Archimedes technique were obtained after binder removal, which was accomplished by …
Page 1 of 2