Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Sintering Atmosphere"”.
-
Ti Powder Sintering: Impurity, Sintering Atmosphere and Alloy Design
… of impurities arising from raw materials and sintering atmosphere, development of novel sintering methods and new alloy design. Since limited works currently focus on the study of residual magnesium chloride impurities originating from the mainstream Ti sponge production process — Kroll …
-
SOLID STATE SYNTHESIS OF MULTICOMPONENT RARE-EARTH OXIDE CERAMICS
… is determined by a combination of composition, sintering atmosphere, and cooling rate. Polycrystalline ceramics comprising various combinations of Ce, Gd, La, Nd, Pr, Sm, and Y oxides in equiatomic proportions were synthesized by solid-state sintering. The effects of composition (type and number …
-
The Design and Optimization of a Lithium-ion Battery Direct Recycling Process
… disassembling prismatic winding cores. Different sintering conditions (e.g., temperature, sintering atmosphere, the amount of lithium addition) are investigated to recycle EOL cathode materials. The results show that the capacity of the recycled cathode materials increases with increasing …
-
Development of hypereutectic Al-Si based P/M alloys
The compaction, sintering and heat treatment processing conditions for the commercial powder, Ecka Alumix 231 with the nominal composition of Al-15Si-2.5Cu-0.5Mg(wt%) have been optimized in this study. It has been found that densification of Ecka Alumix 231 depended largely on the sintering …
-
Processing Effects on (110K) Phase Development and Properties in Bismuth-Strontium-Calcium-Copper-Oxygen Superconducting System
… phase was prepared by distributed liquid phase sintering of combined oxide precursors, $\rm Bi\sb2O\sb3.2SrO$ and (2CaO + 3CuO) from a starting composition of (2.8 224). The samples were characterized using four point probe resistance measurement, SQUID, SEM, TEM, XRD, EDS, EPMA, DTA and TGA. In …
-
Fabrication And Damping Behavior Of Particulate BaTiO3 Ceramic Reinforced Copper Matrix Composites
… size and three processing conditions, sintering atmosphere, cooling rate and, uniaxial compaction pressure on the tetragonality and hence the ferroelectric properties of barium titanate powder were investigated using differential scanning calorimetry (DSC) and x-ray diffraction (XRD). …
-
Efeito da moagem de alta energia na densificação e microestrutura do compósito Cu-C sinterizado em estado sólido
… particles. Particle size, phase dispersion and sintering atmosphere are factors that affect the densification and microstructure of the Cu-C composite. Therefore, this work investigated the influence of milling time on the decrease in size and dispersion of Cu-10% pC composite phases. The effect …
-
Decomposition of Cr(OH)₃ to form active Cr₂C₃
… pellets fired under air, oxygen and nitrogen atmospheres. Energies of activation of 25 and 20 kilocalories per mole were found for the decomposition process and the crystallite growth process, respectively. The decomposition process can be described as a unimolecular mechanism obeying …
-
Development of Porous Metal-supported Solid Oxide Fuel Cells
… and delamination of the cell during the co-sintering process.</p> <p>In this study, the porous metal layer was produced by the freeze tape casting process. During co-sintering, it is necessary to match the relative shrinkage between the metal and ceramic layers. Different parameters which …
-
Estimating valence states of transition metal dopants in polycrystalline strontium titanate and barium zirconate with magnetometry
… when small amounts of Ni are incorporated, sintering temperatures are significantly reduced. In both systems, the valence state of the dopant may affect transport properties and redox reactions in electrochemical applications. Valence states can be estimated from their magnetic properties …
-
High Strength Iron Compacts Containing Carbon, Copper and Tin
… iron powder compacts produced a liquid phase at sintering temperatures of 900-950°C; considerably below the temperatures normally employed for sintering iron-copper compacts. The mechanisms of liquid phase sintering in this system have been studied. Electron probe microanalysis of sintering …
-
Development of Multifunctional Magnetic Core Nanoparticles
… as a magnetite precursor under ambient atmosphere. It was found that the synthesized magnetite was in a non-stoichiometric state, i.e., oxidation occurs. The introduction of Stöber silica (SiO2) layer in the form of a coreshell structure prevented the oxidation of the synthesized …
-
Sintering and Thermal Behavior of Uranium Dioxide in Beryllium Oxide Matrix
… volume of porosity. The pellet pressing and sintering methods were reproduced and then modified; densification measurements were performed to track the pellet status prior to, during, and after sintering using geometric measurements, immersion mass-based measurements, and LVDT dilatometery. …
-
Estudo do efeito da adição de zircônia na microestrutura e propriedades do aço EUROFER sinterizado
… we studied the effect of adding zirconia and sintering atmosphere on microstructure and mechanical properties of EUROFER steel processed through the steps of powder metallurgy. Initially, wt % zirconia was added to steel and high energy ball milling was performed in a planetary milling for 5 …
-
Semiconducting and dielectric properties of barium titanates, tantalates and niobates with perovskite structure
… BaTiO₃ . The effect of preparation conditions, sintering atmosphere, stoichiometry, and post-sinter anneal on the defect chemistry of BaTiO₃ was studied using the electron paramagnetic resonance (EPR) technique. Several paramagnetic defects such as, Ti³⁺ , [Special Characters Removed] were …
-
Centrifuge-aided Micromolding and Sintering of Micron- and Submicron-sized Ceramic Features
… the miniaturization of devices. Micromolding and sintering play critical roles in fabricating micron- and submicron-sized ceramic features using nanoparticles. Developed from soft lithography, replica molding has been proven a good method to prepare micron- and submicron-sized features. However, …
-
The Role of Structure Evolution for PrBaCo2O6-δ in Oxygen Reduction Reaction Kinetics at SOFC Cathode
… powders are synthesized by controlling the sintering atmosphere and temperatures to study and compare the oxygen transport mechanism. In-situ X-ray Diffraction (XRD) was adopted to characterize the structure of PBCO in the SOFC cathode operation range, and it proves that there is a phase …
-
Flash sintering of silicon carbide with boron and carbon sintering aids
… were to assess the feasibility of using flash sintering to manufacture silicon carbide and to understand how the technique affects its density, microstructure and mechanical properties.</p> <p>An experimental apparatus was developed that allowed silicon carbide bar shaped specimens with boron …
-
Processing and Properties of Die-attachment on Copper Surface by Low-temperature Sintering of Nanosilver Paste
… alternative to solder for die-attachment at sintering temperature below 300 °C without applying any pressure. Typically, the substrate, such as direct bond copper (DBC) substrates, has surface metallization such as silver or gold to protect the copper surface from oxidation during the …
-
Zirconia-matrix composites reinforced with metal
… in air and argon to observe the effect of sintering atmosphere, while the composites were pressureless sintered in argon to avoid oxidation. Sintering was carried out at various temperatures for 1 hour and 1450°C was chosen to get almost fully dense samples. The density of the fired samples …
Page 1 of 2