Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 40 for “"Sliding Mode Observer"”.

  1. Nonlinear Sliding Mode Observer Applied to Microalgae Growth

    Modeling biological processes, such as algae growth, is an area of ongoing research. The ability to understand the multitude of parameters that influence this system provides a platform for better understanding the dynamics of microalgae growth. Empirical modeling efforts look to understand sources …

    embry-riddle Repository record for Nonlinear Sliding Mode Observer Applied to Microalgae Growth (opens in a new tab)

  2. Nonlinear Control and Robust Observer Design for Marine Vehicles

    A robust nonlinear observer, utilizing the sliding mode concept, is developed for the dynamic positioning of ships. The observer provides the estimates of linear velocities of the ship and bias from the slowly varying environmental loads. It also filters out wave frequency motion to avoid wear of …

    vt Repository record for Nonlinear Control and Robust Observer Design for Marine Vehicles (opens in a new tab)

  3. Sliding Mode Observers for Distributed Parameter Systems: Theory and Applications

    … velocity, etc. and their partial derivatives to model these phenomena. However, in the case of distributed parameter systems, it is not always possible to have access to the states of the systems due to technical difficulties such as lack of sensors. Therefore, there is the need for state …

    embry-riddle Repository record for Sliding Mode Observers for Distributed Parameter Systems: Theory and Applications (opens in a new tab)

  4. DFIG Based Wind Turbine System For Clemson Micro-grid

    … multiple reference frame theory. A hybrid state observer for speed-sensorless motor drives of induction machines is also proposed. The hybrid observer comprises of a Luenberger observer and a sliding mode observer. For a conventional induction motor with shorted rotor, the stator currents and …

    clemson Repository record for DFIG Based Wind Turbine System For Clemson Micro-grid (opens in a new tab)

  5. Sensorless direct torque and flux control of interior permanent magnet synchronous motors at very low speeds including standstill

    … presented. The studies comprising of analytical, modeling and experimental implementation clearly indicate the potential of a high-performance direct torque controlled IPM synchronous motor drive without a mechanical encoder. The DTC technique and its associated problems have been further …

    unsw Repository record for Sensorless direct torque and flux control of interior permanent magnet synchronous motors at very low speeds including standstill (opens in a new tab)

  6. Robust Observers for Nonlinear Large Scale Interconnected Systems

    … of sensors or any technical issues. Therefore, Observers are needed to estimate unavailable states and then use the estimated states in control design schemes. This thesis focuses on the development of robust observers for nonlinear large-scale interconnected systems. System structures of …

    kent Download PDF for Robust Observers for Nonlinear Large Scale Interconnected Systems (opens in a new tab)

  7. Simulation of Power Control of a Wind Turbine Permanent Magnet Synchronous Generator System

    … and improve the reliability of the system, a sliding mode observer based PM rotor position and speed sensorless control algorithm is presented here. The mathematical models for the wind turbine and the permanent magnet synchronous machine are first given in this thesis, and then optimal power …

    marquette Repository record for Simulation of Power Control of a Wind Turbine Permanent Magnet Synchronous Generator System (opens in a new tab)

  8. Experimental testing of the extended high-gain observer as a disturbance estimator

    In recent years, the extended high-gain observer has proven valuable in its use with fully actuated mechanical systems. In this thesis we investigate the performance of the extended high-gain observer experimentally. First, we explore its use with underactuated mechanical systems. Using the …

    msu Repository record for Experimental testing of the extended high-gain observer as a disturbance estimator (opens in a new tab)

  9. Sensorless Control Techniques for Energy Recovery Systems in Automotive Field

    … an improved Field Oriented Control with a Sliding Mode Observer is implemented to guarantee high eciency. The workow of the thesis introduces the specic application, than the model of drive, thus the improved control strategy is developed. Indeed all the control strategy is deeply evaluated …

    poli-torino Repository record for Sensorless Control Techniques for Energy Recovery Systems in Automotive Field (opens in a new tab)

  10. Έλεγχος του σύγχρονου κινητήρα χωρίς αισθητήρες

    … the necessity of any position sensor by state observers. PMSM sensorless rotor position detection approaches can be classified into two main strategies: saliency and signal injection and fundamental excitation method. Saliency and Signal injection methods are based on phase inductance variation …

    greece Repository record for Έλεγχος του σύγχρονου κινητήρα χωρίς αισθητήρες (opens in a new tab)

  11. Line-of-sight-stabilization and tracking control for inertial platforms

    … performance. In this work, kinematic and dynamic models for a three degrees-of-freedom ISP are presented. These models are based in the vehicle-manipulator system (VMS) framework for modeling of robot manipulators operating in a mobile base (vehicles). The dynamic model follows the Euler-Lagrange …

    brazil-uerj Repository record for Line-of-sight-stabilization and tracking control for inertial platforms (opens in a new tab)

  12. A Position Sensorless Control of Switched Reluctance Motors

    … proposed to estimate rotor position and speed. Sliding mode observer is adopted at high speed and pulse injection method is adopted at low speed. Both of the two methods are adopted with a motion model based on the third order phase locked loop to improve the dynamic tracking performance. The …

    mcmaster Repository record for A Position Sensorless Control of Switched Reluctance Motors (opens in a new tab)

  13. Speed-sensorless torque control of induction motors for hybrid electric vehicles

    … The proposed new control method is based on Sliding-Mode Control (SMC) combined with Space Vector Modulation (SVM) technique. The SMC contributes to the robustness of induction motor drives, and the SVM improves the torque, flux, and current steady-state performance by reducing the ripple. …

    concordia Download PDF for Speed-sensorless torque control of induction motors for hybrid electric vehicles (opens in a new tab)

  14. Motion and Force Control of Flexible Joint Robot Manipulators

    … Then, a fourth order feedback linearizable model is constructed and analyzed. A feedback linearization controller is designed, simulated and implemented in the joint space as a preliminary investigation of the feedback linearization performance. Results proved a tracking performance superior …

    mcmaster Repository record for Motion and Force Control of Flexible Joint Robot Manipulators (opens in a new tab)

  15. Model-based fault detection and diagnosis of selective catalytic reduction systems for diesel engines

    … cause emission violation. In this research, two model-based fault detection and isolation algorithms are developed to detect and isolate the dosing fault and the outlet NOx sensor fault for the SCR system. The dosing fault is treated as an actuator additive fault, while the outlet NOx sensor …

    uiuc Repository record for Model-based fault detection and diagnosis of selective catalytic reduction systems for diesel engines (opens in a new tab)

  16. SENSORLESS CONTROL OF BRUSHLESS PERMANENT-MAGNET MACHINES FOR POWER TOOL APPLICATION

    … initial rotor position error. Also, since most model-based approaches rely on amplitude of back-emf, which is proportional to the rotor speed, these techniques fail in zero and low-speed regions. There is no single sensorless technique suitable for whole speed range therefore suitable sensorless …

    houston Repository record for SENSORLESS CONTROL OF BRUSHLESS PERMANENT-MAGNET MACHINES FOR POWER TOOL APPLICATION (opens in a new tab)

  17. Robust observer based fault diagnosis for nonlinear systems

    The field of observer based fault diagnosis for nonlinear systems has become an important topic of research in the control community over the last three decades. In this thesis, the issues of robust fault detection, isolation and estimation of actuator faults and sensor faults for Lipschitz …

    auckland-ms Repository record for Robust observer based fault diagnosis for nonlinear systems (opens in a new tab)

  18. Design of High Efficiency Brushless Permanent Magnet Machines and Driver System

    … motor (PMSM) design and the mathematics design model of the advanced design method. The advantage of the design method is that it can increase the high load capacity at no cost of increasing the total machine size. After that, the control method of the PMSM and Permanent magnet synchronous …

    ucf Repository record for Design of High Efficiency Brushless Permanent Magnet Machines and Driver System (opens in a new tab)

  19. Robust nonlinear observer for a non-collocated flexible motion system

    … utilizing state-feedback are tied to that of the observers. The primary goal of this thesis is to develop a robust nonlinear observer and closely examine the usefulness of the observer in the presence of non-collocation and parametric uncertainty and as an integral component in closed-loop …

    gatech Repository record for Robust nonlinear observer for a non-collocated flexible motion system (opens in a new tab)

Page 1 of 2