Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 130 for “"Sliding contact"”.

  1. The Role Of Sliding Contact In Nanoscale Tribochemistry

    … silicon and diamond are strongly modied by the sliding speed and the normal stress applied during sliding. This indicates that shear stress modulates the reactivity of the surfaces. This is the rst time that tunable adhesion of hard contacts has been demonstrated in situ. If sliding experiments …

    penn Repository record for The Role Of Sliding Contact In Nanoscale Tribochemistry (opens in a new tab)

  2. Cartilage Biomechanical and Mechanobiological Response to Sliding Contact

    … to loading regimes that permits migrating contact area compared to uniaxial cyclic compression. Interstitial fluid pressure was maintained high under sliding contact while it reduced by 20% in cyclic compression model. Also, maximum fluid flow was reduced by 44% in uniaxial cyclic …

    carleton Repository record for Cartilage Biomechanical and Mechanobiological Response to Sliding Contact (opens in a new tab)

  3. Friction behaviour and friction mechanism of (rolling-) sliding contact

    … reveal the friction behaviour and mechanism of sliding and rolling-sliding contacts, in particular, to quantitatively study the microscale asperity interactions and their contributions to overall friction behaviour. The following contributions have been made in this thesis. Firstly, an …

    unsw Repository record for Friction behaviour and friction mechanism of (rolling-) sliding contact (opens in a new tab)

  4. Thermal analysis of sliding contact systems using the boundary element method

    … rise caused by frictional heating between sliding solids. The theoretical model consists of two semi-infinite substrates each coated with a film of arbitrary thickness and thermal properties. A three dimensional transient analysis is developed which involves the thermal coupling of the two …

    vt Repository record for Thermal analysis of sliding contact systems using the boundary element method (opens in a new tab)

  5. A friction and wear study of carbon in sliding contact with metal.

    … concerns the mechanical wear of carbon in sliding contact with metal. The combinations of carbon and metal materials tested were some of those normally used for mechanical seal applications. The investigation was carried out in two phases...

    nps Repository record for A friction and wear study of carbon in sliding contact with metal. (opens in a new tab)

  6. Thermomechanical material behavior of thin Carbon film under high speed sliding contact

    … out dynamic motion are susceptible to surface contact during normal operation. To avoid critical friction and wear failures, thin carbon films are widely used as the surface protective coating. However, during high speed sliding contact, carbon films can be thermally degraded by the frictional …

    ttu Repository record for Thermomechanical material behavior of thin Carbon film under high speed sliding contact (opens in a new tab)

  7. Investigation of rolling-sliding contact fatigue damage of carburized gear steels, An

    … tests were conducted at 3.2 GPa nominal Hertzian contact stress, based on pure rolling, 100°C, and using a negative twenty percent slide ratio. Tests were conducted to pitting failure for each condition for a comparison of the average fatigue lives. Pure rolling tests were also conducted, and were …

    colo-mines Repository record for Investigation of rolling-sliding contact fatigue damage of carburized gear steels, An (opens in a new tab)

  8. Effect of nickel content on rolling-sliding contact fatigue of carburized steels

    … the performance of steels subjected to rolling-sliding contact fatigue (RSCF). Bars of four different commercially produced alloys (4120, 4320, 4820, and EN-30B) containing 0.13, 1.72, 3.38, and 4.15 wt pct Ni, respectively, were machined into 25.4 mm diameter test specimens and gas carburized. …

    colo-mines Repository record for Effect of nickel content on rolling-sliding contact fatigue of carburized steels (opens in a new tab)

  9. Finite Element Analysis Investigating the Sliding Contact of a Shape Memory Alloy Substrate

    … extensive computational study that simulates the contact behavior of these alloys during a typical sliding wear process has not been investigated. This study uses the finite element method to analyze the sliding contact behavior between a rigid cylinder and a two dimensional shape memory alloy …

    tamu Repository record for Finite Element Analysis Investigating the Sliding Contact of a Shape Memory Alloy Substrate (opens in a new tab)

  10. Effects of copper on wear and rolling-sliding contact fatigue of rail steels

    … of copper content on the wear and rolling contact fatigue (RCF), specifically rolling sliding contact fatigue (RSCF), of hypereutectoid rail steels were evaluated. Steel from three heats of head hardened, hypereutectoid rails with copper levels of 0.07, 0.38, and 0.85 wt pct were selected …

    colo-mines Repository record for Effects of copper on wear and rolling-sliding contact fatigue of rail steels (opens in a new tab)

  11. Use of vibration and acoustic emissions to determine roughness of surfaces in sliding contact

    … relationship with the wear status of bodies in sliding contact. In a wear process, the surface of a moving component evolves continuously, with the change starting at a micro-level and gradually progressing to a macro-level. Therefore, it is important to monitor and quantify the change in the …

    unsw Repository record for Use of vibration and acoustic emissions to determine roughness of surfaces in sliding contact (opens in a new tab)

  12. The Influence of Architecture and Composition on the Evolution on Thin Films During Sliding Contact

    As surfaces undergo sliding contact, their structure and mechanical properties can evolve or change relative to their as-fabricated state. These shifts can then influence the tribological performance of the system. To understand the extent and implications of these structural and property shifts, …

    clemson Repository record for The Influence of Architecture and Composition on the Evolution on Thin Films During Sliding Contact (opens in a new tab)

  13. Development of nano composite coatings for enhanced performance in non-conventional lubricants under sliding contact.

    … has been performed on uncoated steel contacts to assess friction and wear performance of HFE-7000 (HFE-347mcc3). HFE-7000 has been employed as lubricants. In the second part of this study five different types of coatings namely, Ni-Al2O3, Ni-ZrO2, Ni-SiC, Ni-Graphene and Nickel-only …

    bournemouth Download PDF for Development of nano composite coatings for enhanced performance in non-conventional lubricants under sliding contact. (opens in a new tab)

  14. Effect of nickel and retained austenite on rolling sliding contact fatigue resistance in carburized steels, The

    … content and retained austenite (RA) on rolling-sliding contact fatigue (RSCF) life in carburized steel. In order to evaluate Ni and retained austenite effects, this study utilizes carburized steel specimens of 4120 (0.13 wt pct Ni, 15.2 vol pct RA), 4820 (3.38 wt pct Ni, 20.2 vol pct RA), and EN …

    colo-mines Repository record for Effect of nickel and retained austenite on rolling sliding contact fatigue resistance in carburized steels, The (opens in a new tab)

  15. A study of the effect of normal stiffness on kinetic friction forces between two bodies in sliding contact

    … in the direction normal to the plane of contact between surfaces in sliding contact had on the phenomenon of stick-slip. The results showed that the amplitude of stick-slip vibrations could be reduced by increasing the normal stiffness with contacting surfaces of mild steel. This …

    vt Repository record for A study of the effect of normal stiffness on kinetic friction forces between two bodies in sliding contact (opens in a new tab)

  16. Design and fabrication of a twin disc tribometer and a study of wear and friction of hardened 1060 steel under combined rolling and sliding

    … of steel was studied under different loading and sliding conditions. A twin-disc tribometer was designed and built for studying wear of steels under combined rolling and sliding contact. The samples were made from 1060 steel in the form of circular discs and heat treatment was performed to attain …

    uiuc Repository record for Design and fabrication of a twin disc tribometer and a study of wear and friction of hardened 1060 steel under combined rolling and sliding (opens in a new tab)

  17. Electrical Properties of Conductive Electric Roads

    … roads, specifically assessing the electrical sliding contact that facilitates energy transfer between the electric road and the vehicle, as well as evaluating the system’s power capabilities, losses, and efficiency in relation to varying traffic characteristics. It also addresses challenges …

    lund Repository record for Electrical Properties of Conductive Electric Roads (opens in a new tab) Download PDF for Electrical Properties of Conductive Electric Roads (opens in a new tab)

  18. Computational study on dynamic surface contact behavior of diamond-like carbon (DLC) doped with hydrogen

    … on the mechanical stiffness and thermomechanical contact behavior of DLC film. The hydrogenated DLC is prepared by replacing the carbon atoms in DLC with hydrogen atoms, in which the at.% H is varied from 0 to 8.6 %. The mechanical stiffness of hydrogenated DLC (a-C:H) is measured from the …

    ttu Repository record for Computational study on dynamic surface contact behavior of diamond-like carbon (DLC) doped with hydrogen (opens in a new tab)

  19. TRIBOELECTRIC GENERATOR FOR ENERGY HARVESTING

    … to power its ports and vehicles. A linear sliding contact-mode triboelectric nanogenerator (TENG) consisting of two interdigitative copper electrodes and polytetrafluoroethylene (PTFE) adhesive tape was constructed on 3D printed material. To improve the TENG’s performance in low frequency, …

    nps Repository record for TRIBOELECTRIC GENERATOR FOR ENERGY HARVESTING (opens in a new tab)

Page 1 of 7