Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"Sliding contacts"”.
-
Temperatures and friction at lubricated rolling/sliding contacts
… temperatures and friction at lubricated rolling/sliding contacts of the Hertzian type are investigated and examined in relation to the failure of contacts by scuffing and their performance under traction conditions. Based on the critical temperature criterion for scuffing, an experimental …
-
The onset of gouging in high-speed sliding contacts
Hypervelocity gouging occurs in high speed sliding systems such as rocket sled test tracks, light gas guns, and railguns. Gouging takes the form of teardrop-shaped craters on the rail surface, and usually only occurs above a threshold speed which is dependent on the slider and rail material …
-
Wear modelling and FEA simulation for dry sliding contacts
… nodal pressures at the contact region for small sliding steps. These pressures are then inputted to a customised wear calculating routine. The routine uses averaged wear coefficients (wear rates) obtained from custom designed experiments. The FEA contact geometry is modified after each sliding …
-
Influence of crystallographic orientation in normal and sliding contacts
… orientation on key parameters in normal and sliding contacts. The simulations of interfering cylindrical asperities, using finite element analysis, were conducted using two different plasticity models for copper: a conventional isotropic, homogeneous J2 plasticity model and a continuum …
-
Tribology of Sliding Contacts Within Plain Bearing Overlays Subject To Corrosion.
The increasing global awareness and legislative restrictions has influenced the design within Internal Combustion (IC) engines. In addition to meeting environmental requirements the specified materials should be suitable to withstand extreme operating conditions such as high combustion pressures …
-
Tribology and Surface Engineering for Lubricious Dry-Sliding Contacts of MoS2 Based Coatings
… the lubricity of MoS2 during room temperature sliding is drastically reduced in humid, terrestrial atmospheres. The reason behind this degradation is not fully understood, with multiple conflicting arguments as to why this may be the case. One leading hypothesis suggests that adsorbed water …
-
Study and modelling of surface topography changes during running-in in rolling-sliding contacts under mixed lubrication
… of the running-in phenomenon in bearing contacts, where it significantly influences the overall performance and service life of bearings. The project simulated a pure-rolling and rolling-sliding contact of a roller-element bearing using a mini traction machine (MTM) and a twin disc …
-
Mechanisms of Formation and Effects of Transition Metal Oxides in Silicon Nitride on Steel Dry Sliding Contacts
Silicon nitride on steel sliding contacts may provide advantageous tribological properties over traditional self-mated pairs, however the friction and wear behavior at high sliding speeds (>1 m/s) is not well understood. Previous studies at low sliding speeds (< 1 m/s) have found that the wear …
-
A finite element investigation of the deformations, forces, stress formations, and energy lossses in elasto-plastic sliding contacts
… Finite Element Analyses (FEA) used to simulate sliding contact in two (2D) and three dimensions (3D) between two interfering elasto-plastic bodies. Cylinders are used to model sliding contact in 2D, simplified by the assumption of plane strain. Sliding is studied between two cylinders modeled …
-
Multi-Scale Characterisation of Heterogeneity in Granular Materials
… network revealed that only strong and non-sliding contacts (where strong contacts are those with an above-average normal force) provided shear resistance. Further, the mobilised internal friction angle was shown to be uniquely described by the geometric configuration of strong and …
-
Triboemission From Ceramics: Charge Intensity and Energy Distribution Characterizations
… of charged-particles triboemitted from sliding contacts of ceramics. A review is presented of research work on tribochemistry and, in particular, on tribopolymerization as a lubrication mechanism. Relevant literature is also reviewed on the phenomena of exoemission, triboemission and …
-
Surface durability under low lambda conditions
… (λ < 1). In this research, tests of rolling/sliding contacts were conducted with a disc-type tribometer using carburized steel specimens with a circumferential lay direction and oil with anti-wear additives under variable conditions typical in off-road vehicle drivetrains. Phase I of this …
-
Avaliação tribológica dos polímeros NBR, PTFE e PTFE gravitado em contato com aço AISI 52100
… materials candidate to seals submitted to sliding contacts to metal surfaces. This investigation aimed to evaluate tribological responses of a commercial NBR, hardness 73 ± 5 Sh A, polytetrafluoroethylene (PTFE), hardness 60 ± 4 HRE and PTFE with graphite, 68 ± 6 HRE. The testings were …
-
Bending Mechanics of Bio-mimetic Stiff Scale-Covered Plate
… (FE) codes has proved difficult due to multiple sliding contacts between the scales after engagement. Therefore, accurate and reliable analytical models of architecture-property-relationships are needed for analysis and design. This thesis investigates the contact kinematics and mechanics of …
-
Tribological Improvements of Carbon-Carbon Composites by Infiltration of Atomic Layer Deposited Lubricious Nanostructured Ceramic Oxides
… and wear resistance in low and high speed sliding contacts. Characterization of microstructural evolution was achieved by using energy dispersive x-ray spectroscopy (EDS) mapping in scanning electron microscope (SEM) coupled with focused ion beam (FIB), x-ray tomography, high resolution …
-
Tribological assessment of oil condition sensors for marine launching equipment.
… conditions.Tribology tests were performed for sliding contacts as they are the most predominant type of contacts within hydraulic systems. Results reveal that several characteristics of the sensors must be improved for a more meaningful output and for an earlier detection of abnormal trends …
-
Friction behaviour and friction mechanism of (rolling-) sliding contact
… reveal the friction behaviour and mechanism of sliding and rolling-sliding contacts, in particular, to quantitatively study the microscale asperity interactions and their contributions to overall friction behaviour. The following contributions have been made in this thesis. Firstly, an …
Page 1 of 2