Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Sliding mesh"”.

  1. An improved volumetric LBM boundary approach and its extension for sliding mesh simulation

    … volumetric LBM boundary scheme is extended to sliding-mesh interface condition for flow simulation involving rotating geometries. A volumetric LBM sliding-mesh interface scheme couples the flow solutions on both sides of sliding interface, and conserves the mass and momentum flux across it. …

    iastate Repository record for An improved volumetric LBM boundary approach and its extension for sliding mesh simulation (opens in a new tab)

  2. SLIDING MESH COMPUTATIONAL FLUID DYNAMICS SIMULATION OF A WIDE AND NARROW GAP INLINE ROTOR-STATOR MIXER

    … in conjunction with a RANS turbulence model and sliding mesh technique. Simulated turbulence intensities and mass flow rates are more evenly distributed in the standard gap model. Further, turbulence and mean shear levels within the gap are minimal and probably not important for the production of …

    maryland Repository record for SLIDING MESH COMPUTATIONAL FLUID DYNAMICS SIMULATION OF A WIDE AND NARROW GAP INLINE ROTOR-STATOR MIXER (opens in a new tab)

  3. CFD Investigation on Sliding Mesh as a Method to Model Wheel Rotation - Implementation and Analysis on Different Rims

    … and it has a number of drawbacks. Alternatively, sliding mesh is an improved model that captures the true motion of a wheel and therefore it is considered to deliver an enhanced numerical solution compared to MRF. This thesis aims at investigating the use of sliding mesh as a wheel rotation method …

    chalmers Repository record for CFD Investigation on Sliding Mesh as a Method to Model Wheel Rotation - Implementation and Analysis on Different Rims (opens in a new tab)

  4. Numerical Analysis of an Axial Flow Horizontal Axis Marine Hydrokinetic Turbine

    … effects of the turbine are modeled using the sliding mesh technique. The realizable k-epsilon model is employed to solve the closure problem. The methodology is validated against experimental data measured in open channel tests conducted at the St. Anthony Falls Laboratory of the University of …

    washington Repository record for Numerical Analysis of an Axial Flow Horizontal Axis Marine Hydrokinetic Turbine (opens in a new tab)

  5. Numerical Simulation of a Cross Flow Marine Hydrokinetic Turbine

    … Stokes equations and the three-dimensional sliding mesh technique to model CFHTs. The methodology is validated against small scale experiments, available within NNMREC at the University of Washington and is used to investigate the efficiency of the energy capture and the hydrodynamic forces …

    washington Repository record for Numerical Simulation of a Cross Flow Marine Hydrokinetic Turbine (opens in a new tab)

  6. Estudio integral del flujo en la turbina y la estela de aerogeneradores experimentales

    … using an actuator volume model and the sliding mesh technique was applied to perform the rotation motion of the rotor. The forces acting on the blades were computed from the predicted velocity field in a predefined position upstream the rotor plane and updated in every time-step. …

    oviedo Repository record for Estudio integral del flujo en la turbina y la estela de aerogeneradores experimentales (opens in a new tab)

  7. Analysis of a Turbopiston Pump

    … moving frame and the complicated transient sliding mesh schemes. The flow pattern, static pressure distribution, and total pressure losses are calculated and analyzed. The regions of high total pressure losses and potential creation of cavitation are identified. Design changes are …

    uno Repository record for Analysis of a Turbopiston Pump (opens in a new tab)

  8. CFD Simulations of a Propeller-Wing Interaction

    … of the model was created using commercial mesh generation software, GRIDGEN, and then simulations were performed using a commercial finite volume Reynolds-Averaged Navier-Stokes (RANS) solver FLUENT. Initial runs were performed to validate the boundary conditions and setup of the problem …

    odu Repository record for CFD Simulations of a Propeller-Wing Interaction (opens in a new tab)

  9. Výpočtová analýza proudění v bubnové sušičce prádla

    … uvnitř bubnové sušičky prádla s využitím MRF a Sliding Mesh modelů. Nakonec je proveden rozbor získaných dat a je určeno průměrné množství vzduchu proudícího bubnem samotným. Naopak cílem práce není vytvořit další textovou pomůcku pro studenty zabývající se CFD tématikou.

    brno-tech Repository record for Výpočtová analýza proudění v bubnové sušičce prádla (opens in a new tab)

  10. Flow patterns and energy dissipation rates in batch rotor-stator mixers

    … k-e turbulence model in conjunction with sliding mesh method was employed and the simulation results were verified by laser Doppler anemometry (LDA) measurements. The agreement between predicted and measured velocity profiles in the bulk and of jet emerging from stator hole was very good. …

    birmingham Repository record for Flow patterns and energy dissipation rates in batch rotor-stator mixers (opens in a new tab) Download PDF for Flow patterns and energy dissipation rates in batch rotor-stator mixers (opens in a new tab)

  11. Experimental investigation and numerical prediction of the performance of a cross-flow fan

    … calculate the unsteady flow through a CFF with a sliding mesh incorporated. The results of the CFD showed the necessity to re-investigate the cross-flow fan with 12-inch diameter, 1/5-inch span and 30 blades, and additional measurement locations were implemented to carry out a more accurate …

    nps Repository record for Experimental investigation and numerical prediction of the performance of a cross-flow fan (opens in a new tab)

  12. Simulation of Morphing Blades for Vertical Axis WInd Turbines

    … order to simulate the morphing blade for VAWT, a sliding mesh method is used to simulate the VAWT rotation while a user-defined function (UDF) is written for the blade morphing flexure motion. This entails the use of dynamic mesh smoothing to prevent the mesh from having negative cell volumes. …

    concordia Download PDF for Simulation of Morphing Blades for Vertical Axis WInd Turbines (opens in a new tab)

  13. Unsteady LPT Blade Effects on Outlet Guide Vane Heat Transfer. Analysis of transient thermal loads induced by blade wakes in turbine rear structures

    … of Outlet Guide Vane (OGV) heat transfer using sliding mesh techniques and advanced turbulence models, notably the SSTtransition turbulence model. Validation of this model was conducted against experimental HTC data obtained from a 1.5-stage test rig at Chalmers. The transient simulations reveal …

    chalmers Repository record for Unsteady LPT Blade Effects on Outlet Guide Vane Heat Transfer. Analysis of transient thermal loads induced by blade wakes in turbine rear structures (opens in a new tab)

  14. Parametric Study of Aerodynamic Performance of an Airfoil with Active Circulation Control Using Leading Edge Embedded Cross-Flow Fan

    … achieving higher circulation control. Unsteady sliding mesh method is used to carry out the numerical simulation. The fan geometry is developed and housed in a NACA 651-212 airfoil. The of the CFD work show that the jet leaving the fan replaces the boundary layer of the upstream flow with a flow …

    embry-riddle Repository record for Parametric Study of Aerodynamic Performance of an Airfoil with Active Circulation Control Using Leading Edge Embedded Cross-Flow Fan (opens in a new tab)

  15. Tidal Turbine Rotor Spacing Influence On Power Performance: Simulating A Scaled Dual-Rotor Axial Flow Turbine

    … 3D RANS with the k-ω SST turbulence model and sliding mesh technique. The turbine is an axial flow, dual rotor tidal turbine with counter-rotating rotors, each with two blades and a diameter of d_T = 0.5 m, representing an approximately 1:40 scale system based on the U.S. Department of Energy’s …

    umn Repository record for Tidal Turbine Rotor Spacing Influence On Power Performance: Simulating A Scaled Dual-Rotor Axial Flow Turbine (opens in a new tab)

  16. Aerodynamics of a freight train passing through a tunnel

    … using unsteady RANS combined with the sliding mesh technique. The 1/25th scaled model represents a Class 66 locomotive connected to container wagons, entering a circular tunnel at 33.5m/s with a blockage ratio of 0.202. The effects of loading configuration, nose roundness, train length …

    birmingham Download PDF for Aerodynamics of a freight train passing through a tunnel (opens in a new tab)

  17. Methodology for the Numerical Characterization of a Radial Turbine under Steady and Pulsating Flow

    … cost. Concerning the cell size, a local mesh independence analysis is proposed as a procedure to optimize the distribution of cells in the domain, thus allowing to use a finer mesh in the most suitable places. Particularly important in turbomachinery simulations is the influence of the …

    upv Repository record for Methodology for the Numerical Characterization of a Radial Turbine under Steady and Pulsating Flow (opens in a new tab)

  18. Numerical simulation of the aerodynamic performance of an H-rotor.

    … used a commercial CFD package ANSYS-Fluent. The sliding mesh model of ANSYS-Fluent is applied to evaluate unsteady interaction between the stationary and rotating components. Our simulation shows that the DNS cannot correctly predict the power coefficient due to the lack of grid resolution at …

    louisville Repository record for Numerical simulation of the aerodynamic performance of an H-rotor. (opens in a new tab)

  19. Aerodynamic and Modal Analyses of Small Scale Horizontal Axis Wind Turbine with Various Numbers of Blade Design

    … HAWT rotor results were used to initialize the Sliding Mesh Models (SMM) solver and study the dynamic behavior of HAWT rotor. The pressure and velocity contours on different blades surfaces were analyzed and presented in this work. The pressure and velocity contours around the entire turbine …

    gsu Repository record for Aerodynamic and Modal Analyses of Small Scale Horizontal Axis Wind Turbine with Various Numbers of Blade Design (opens in a new tab)

  20. CFD applied to decanter centrifuges

    … sewage slurry within a decanter centrifuge. A sliding mesh approach was used to model the rotation of the decanter centrifuge and a moving wall boundary condition is applied to the surface of the centrifuge drum to simulate the speed differential. The multiphase flow equations were solved by …

    chalmers Repository record for CFD applied to decanter centrifuges (opens in a new tab)

Page 1 of 3