Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Slip Resistance"”.
-
Measuring Slip Resistance of Winter Footwear
Slip and fall accidents represent an enormous burden in terms of human suffering and economic costs. In winter conditions, outdoor falls increase as cold temperatures and precipitation create hazardous conditions underfoot. An effective method of reducing falls is the use of slip resistant …
-
Advanced AI-based Methods for Automated and Accessible Slip Resistance Evaluation of Winter Footwear
Slips and falls represent a major public health concern in Canada, leading to significant hospitalizations and healthcare costs. Slips are one of the leading causes of falls, which can result in severe injuries, such as strains, sprains, and back injuries. Footwear is a key factor in preventing …
-
Relating Vehicle Skid Friction To Pedestrian Slip Resistance on Pavements with Machine Learning Integration and Master Curve Development for Distress Prediction
… safety. Agencies need to relate vehicular skid resistance with pedestrian slip resistance on the pavement surfaces located at critical locations such as crosswalks. Thus, there was a critical need to examine and relate such parameters on typical marking materials by: conducting an extensive …
-
Design of a Versatile Slip Resistance Tester Mimicking Foot Kinematics and Kinetics During Human Slip and Classification of Slip Risk Event Based on Instrumented Insole Input
The investigation of slip-induced falls is a pressing concern due to the high incidence of both human injuries and economic losses. A comprehensive understanding of the gait cycle is vital in grasping the dynamics of slipping and designing appropriate footwear and floor materials to mitigate slip …
-
Extraction of elastic-plastic material properties from spherical indentation stress-strain measurements and finite element simulations
… (e.g., elastic stiffness constants and initial slip resistance) from nanoindentation measurements. All of the new protocols will be validated using a finite element model of the spherical indentation, used here as a surrogate for the actual experiment. The protocols are also demonstrated on a …
-
Evaluation of Steel H-Piles with Localized Corrosion and Rehabilitation Using Friction-Type Bolted Steel Plates
… plates, the magnitude of bolt pretension and slip resistance. The findings indicated that increases of the length of the repair system, magnitude of bolt pretension and slip resistance can enhance the capacity of pile with local failure within the corroded region. These three factors do not …
-
Molecular Dynamics Studies of the Response of Symmetric Tilt Grain Boundaries to Deformation in Rocksalt Structured, Ionically Bonded Ceramics
… pressure and a concomitant reduction in the slip resistance of grain boundaries formed from arrays of dislocations. (iv) mixing at amorphous grain boundaries formed by phase separation due to dislocation activity. Additionally, the atomic mechanisms of dislocation emission and absorption at …
-
Experimental characterization and crystal plasticity modeling of mechanical properties and microstructure evolution of additively manufactured Inconel 718 superalloy
… grain size and shape effects into the initial slip resistance. For activating the slip systems, the non-Schmid effects and backstress are implemented in the model. The crystal plasticity model is capable of simulating the monotonic and large-strain load reversal cycles of the material with pole …
-
Biomechanical characterization of slipping on pervious and traditional concrete walking surfaces
… is a porous material that may provide superior slip resistance due to its ability to exfiltrate melted ice and other slippery surface contaminants. The purpose of this study was to analyze slip-related biomechanical characteristics during gait on pervious and traditional concrete in dry and icy …
-
Influences of Inhomogeneous and Anisotropic Slip System Strength Distributions on Mechanical Properties of Metals
… crystal scale mechanics and the process of slip to polycrystalline behavior. This method provides a way to relate the resistance to plastic deformation with the presence of various defects within the material. In many implementations, the initial slip resistance does not consider the …
-
Floor slipperiness and load carrying effects on the biomechanical study of slips and falls
… have been the main approaches for investigating slips and falls. The commonly used dynamic coefficient of friction (DCOF), a tribological approach, is based on limited biomechanical studies. Therefore, a study was conducted to find the floor slipperiness effect, load carrying effect, and …
-
An Investigation into the Potential Creative Applications of Refractory Concrete
… and fired toughness and strength, thermal shock resistance, ceramic glaze compatibility, thixotropic effects and rapid setting. These properties offer the opportunity to achieve the creation of objects that do not conform to some of the traditional limitations of conventional clay. This research …
-
Shape memory behavior of ultrafine grained NiTi and TiNiPd shape memory alloys
… transforming phases and relatively low lattice resistance against dislocation motion. The objective of this study is to increase the slip resistance and thus, to minimize the plastic accommodation upon phase transformation in NiTi and TiNiPd SMAs. The effects of grain refinement down to …
-
Use of Permanent Magnets to Improve the Seismic Behavior of Light-Framed Structures
… was utilized to produce the required friction resistance. A sliding wall configuration consisting of flexible permanent magnets and steel plates sandwiched between the plywood sheets was analyzed for its effectiveness in mitigating the response of a two story wood shear wall structure. The …
-
Physics-based crystal plasticity modeling of single crystal niobium
… success has been limited owing toill-defined slip planes. The flow stress of a bcc metal is stronglydependent on temperature and orientation due to the non-planar splittingof a/2<111> screw dislocations. As a consequence of this, bccmetals show two unique deformation characteristics: (a) …
-
Large-Scale Externally Bonded Fibre-Reinforced Polymer Systems for Tension Strengthening of Existing Reinforced Concrete Structures with and without Fibre Anchors
… under axial loading, while a semi-empirical bond-slip model was proposed using digital image correlation (DIC) data from 24 of the 51 tests and validated against 1659 filtered results from the literature. The model integrates fracture mechanics principles with regression analysis to provide a …
-
Dislocation slip and twinning stress in shape memory alloys- theory and experiments
Slip and twinning are two important deformation mechanisms governing Shape Memory Alloys (SMAs) plasticity, which results in affecting their pseudoelasticity and shape memory performance. Precisely determining Peierls stress in dislocation slip and critical twin nucleation stress in twinning is …
-
Bayesian Estimation of Grain Scale Elastic-Plastic Intrinsic Material Properties via Spherical Indentation Measurements and the Exploration of Design of Experiments Strategies
This thesis is focused on establishing and demonstrating a statistical framework for the objective fusion of data acquired from multiscale experiments and multiscale models performed to understand and predict the intrinsic material behavior. What makes this difficult is that the experimental data …
-
Development of a Ridged Slip-Resistant Connection for Modular Aluminum Bridge Deck Applications
… material that possesses excellent corrosion resistance and has been shown to be an attractive alternative to steel and concrete for the construction and rehabilitation of bridge structures. It is often possible to increase the load-carrying capacity of a bridge with an existing concrete deck …
-
Elaboração de um instrumento de avaliação de segurança em calçadas
A falta de controle e planejamento dos espaços públicos, entre eles, as calçadas, gera problemas como a falta de segurança e de acesso aos equipamentos urbanos e até impede a livre circulação das pessoas. As calçadas são uma pequena, mas importante parte da complexa infraestrutura urbana. O …
Page 1 of 2