Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 99 for “"Slip System"”.
-
The Role of Slip System Activation on Ni-Based Superalloy High Temperature Fatigue
… be caused by the activation of the {100} cubic slip plane along the usual {111} octahedral slip plane. This study continued the work of previous research by using SEM and EBSD imaging to characterize the microstructure of IN-718 specimens before and after preconditioning. The microstructure …
-
Influences of Inhomogeneous and Anisotropic Slip System Strength Distributions on Mechanical Properties of Metals
… crystal scale mechanics and the process of slip to polycrystalline behavior. This method provides a way to relate the resistance to plastic deformation with the presence of various defects within the material. In many implementations, the initial slip resistance does not consider the …
-
Water-content dependence of dislocation mobility of olivine in the [100](010) slip system
… of dislocation mobility in the [100](010) slip-system of olivine under upper-mantle conditions, namely at a pressure of 2.75 GPa and a temperature of 1500, using a multi-anvil apparatus. Since olivine is the most abundant mineral of the Earth’s upper mantle, it is considered to control …
-
Non-Schmid Effects and Criteria for Dislocation Nucleation on Different Slip Systems at Grain Boundaries
… The local resolved shear, normal, and co-slip stresses needed for grain boundary dislocation nucleation are found. A framework is developed to detect the slip system grain boundary dislocation nucleation occurs on. A survey of the different ways grain boundary dislocation nucleation occurs …
-
Characterizing the southeast Caribbean-South American plate boundary at 64°W
… determine instead that the dextral strike-slip system along the Venezuelan coast cuts near-vertically through the crust and offsets the Moho. The strike-slip system fundamentally defines the plate boundary, deriving from a shear tear through the entire lithosphere that is actively …
-
Kinetics of Plastic Flow in Polycrystal Plasticity
… model. A modified power law is used to determine slip system activity without introducing artificial strain rate sensitivity. In addition, a slip system hardening law is introduced that is capable of modeling stage IV hardening. The evolution law uses two state variables and includes a hardening …
-
Characterization of Slip Activity in the Presence of Slip Bands Using Surface-Based Microscopy Techniques
Further understanding of mesoscale slip mechanics is crucial to future development of polycrystalline metals with improved performance. The research contained within this thesis aims to characterize localized mesoscale slip on slip bands further through two studies. First, a comprehensive …
-
Experimental deformation of mantle minerals at simultaneous high pressure and high temperature
… the experimental data and modelling, data slip system activities were extracted. A change of slip systems with an increase in pressure and, above all, in temperature takes place in ferropericlase. At low temperatures the slip system {110}<11 ̅0> is fully active. With an increase in …
-
Deformation and residual stresses at the intragranular scale – a study using high energy x-ray diffraction and modeling in polycrystalline alloys
… residual stresses, stress triaxilities, slip system activities, strain rate sensitivities and intermittency in plasticity (jerky motion of dislocations) within individual grains of a Ti-7Al alloy sample so as to interpret the deformation mechanisms and locate any weak spots at that length …
-
The origins of olivine fabric transitions and their effects on seismic anisotropy in the upper mantle
… by dislocation glide through the (010)[100] slip system. At higher strain rates evidence for the B-type fabric was observed, suggesting increased activity of the (010)[001] slip system at higher stresses. Recrystallization grains size and dislocation densities were used to estimate stresses …
-
The structural evolution of the Sunshine Springs thrust area, Marathon Basin, Texas
… equals 52 percent. A major left-lateral strike-slip system, trending WNW, approximately parallel with the thrusting direction, offsets the Sunshine Springs thrust fault. Strike-slip and dip-slip displacements can be calculated from a displaced fold axis of the lower plate syncline, and are 335 m …
-
Studies on the role of microstructure in the dynamic strength of metals
… distribution, caused by relative differences in slip system activity. Application of a novel orientation-based analysis framework shows that the yield point of the polycrystalline material can be predicted reasonably well, predicated upon the use of dynamic critical resolved shear stress (CRSS) …
-
Crystal Plasticity Modeling and Simulation of Nanotwinned Metals
… Nanotwinned copper is used as a model material system. We focus on formulating and modeling the mechanics to describe the following characteristics reported in this model microstructure: (i) enhancement of yield strength with reduction in twin thickness, (ii) reduction in yield strength with …
-
Gradient Enhanced Plasticity and Damage Models ¿ addressing the limitations of classical models in softening and hardening.
… theory for a crystal plasticity model with one slip system is proposed such that the fine-scale properties propagate into the (coarse) macro-scale. Chapter 6 extend this theory to a plane strain bending problem, where the homogenized micro-force balance has the same form as the implicit gradient …
-
An Atomistic Approach for the Survey of Dislocation-Grain Boundary Interactions in FCC Nickel
… It is found that the ability to predict the slip system of a transmitted dislocation using common geometric criteria is confirmed. Furthermore, machine learning processes are implemented to find that geometric properties, such as the minimum potential residual burgers vector and the …
-
Quantifying The Evolution Of Crystal Stresses During Monotonic And Cyclic Loading Using Finite Element Simulations
… crystal quantities such as the crystal stresses, slip system activity and the slip system strengths, which are available from the simulation data, are examined and explained in a consistent manner with respect to the single crystal yield surface topology. The final chapter, Chapter 4, is a brief …
-
ECCI analysis of slip accommodations in polycrystal alpha titanium during heterogeneous plastic deformation
… array due to dislocation nucleation, and slip across grains and grain boundaries, electron channeling contrast imaging (ECCI) based analysis is used, since this special scanning electron microscopy (SEM) technique possesses variety observation scopes, providing a linkage between the macro- …
-
Evolution of deformation twins and dislocations near grain boundaries in commercial purity titanium
… often results in the development of dislocation slip bands and deformation twins in individual grains. Evolution of deformation microstructures is closely tied to the plasticity and service conditions of the material. This study employed two modern characterization tools, Electron Backscattered …
-
The influence of hydrogen, deformation geometry, and grain size on the rheological properties of olivine at upper mantle conditions
… of the (001)[100] and (100)[001] dislocation slip systems, which cannot be individually activated in triaxial compression. At high-temperature conditions, crystals oriented for shear on the (001)[100] slip system are observed to be weaker than crystals oriented for shear on the (100)[001] slip …
Page 1 of 5