Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 77 for “"Slip boundary condition"”.
-
Numerical Simulation of Hydrodynamic Bearings with Engineered Slip/No-Slip Surfaces
The no-slip boundary condition is the foundation of traditional lubrication theory. It says that fluid adjacent to a solid boundary has zero velocity relative to that solid surface. For most practical applications the no-slip boundary condition is a good model for predicting fluid behavior. …
-
NUMERICAL SIMULATION OF CONTACT LINE PROBLEMS USING PHASE FIELD MODEL
… considered and the walls are hydrophobic with no-slip boundary condition imposed on all walls, the initial random noise vapor- liquid system will evolve to a stable droplet at the center and the velocity field of the droplet will tend to zero at equilibrium. With the same boundary conditions, the …
-
Simulation of slip flow and phase change in nanopores
… we developed pore-scale models to simulate fluid slip flow through complex porous media and phase transition in nanopores with a pore size distribution. Slip flow is a well-recognized phenomenon that enhances the rate of liquid or gas flow at micrometer and nanometer scales. However, the ability …
-
Analysis of Natural Convection Flow in a Detector Using Computational Fluid Dynamics
… 2) turbulent Schmidt number, and 3) the boundary condition employed at the liquid-ullage interface, i.e. slip vs. no slip. The effect of mesh refinement was analyzed by comparing the results of six levels of mesh refinement, ranging from 40.8 to 151.6 million cells. The simulation was …
-
A finite element model of ocean circulation
… quasi-geostrophic equations and the use of no-slip boundary condition on the horizontal solid boundaries. In contrast to eddy resolving models that utilize free-slip boundary conditions our results suggest that the obtention of ocean eddies with the no-slip constraints requires a more …
-
Analysis of a Galerkin-Characteristic algorithm for the potential vorticity-stream function equations
… component of the equations. The algorithm is unconditionally stable and conservative for Δt = O(h). The error analysis with respect to L² -norm shows that the algorithm converges with order O(h); however, in the maximum norm it is proved that for sufficiently smooth functions the foot of the …
-
Development of a Novel Immersed Boundary-Lattice Boltzmann Method and Its Applications
In recent years, the immersed boundary method (IBM) has been developed into a popular numerical technique in the community of computational fluid dynamics (CFD). On the other hand, as an alternative CFD tool, the lattice Boltzmann method (LBM) has gained wide range applications recently. Since the …
-
Microscale observables for heat and mass transport in sub-micron scale evaporating thin film
… film region under nonisothermal interfacial conditions. The model incorporates thermocapillary stresses at the liquid-vapor interface, a slip boundary condition on the solid wall, polarity contributions to the working fluid field, and binary mixture evaporation. The analytical results show …
-
Dissipative particle dynamics simulation of micro-concentric/eccentric annular flows
… In this thesis, a new implementation of the no slip boundary condition in the modeling of solid boundaries is studied. After that, the effects of two important DPD parameters (particle density and conservative coefficient) are studied. Furthermore, to confirm the ability of DPD method to provide …
-
The propagation of the gravity current of Bingham fluid : a numerical investigation
… asymptotic theory, a plasticity model based on slipline theory, and other past results. Numerical difficulties with the moving contact lines are encountered during the numerical simulation. A slip boundary condition is used to address this issue, the validity of which should be further …
-
Parallel adaptive finite element methods for problems in natural convection
… of simulations of the RBM problem with a stick-slip boundary condition demonstrate the suitability of AMR for computing these flows.
-
Molecular dynamics and continuum simulations of fluid flows with slip boundary conditions
… fluid flows aresignificantly influenced by boundary conditions. The fundamentalassumption in fluid mechanics is the no-slip boundary condition,which states that the tangential fluid velocity is equal to theadjacent wall speed. Although this assumption is successful indescribing fluid flows …
-
Numerical Study of Flow and Heat Transfer in Rotating Microchannels
… of rotation, channel aspect ratio, and wall boundary conditions on the fluid flow and heat transfer phenomena in rotating microchannels has not yet been conducted. During the present study, pressure-based finite volume solvers in both staggered and collocated grids were developed to solve …
-
Interfacial slip of a quartz sensor in liquid
The interfacial slip parameter is a complex-valued property of the interface between the solid surface of a quartz sensor and the liquid in contact with the sensor surface. It is introduced in the theory of the quartz-liquid system by generalizing the no-slip boundary condition. The interfacial …
-
Contributions to the study of the capillarity of thin liquid films: analysis of measurements of dry spot nucleation and the use of diffuse interface theory for contact line dynamics
… approximation combined with the standard no-slip boundary condition used in continuum theory cannot describe contact line dynamics. A model assuming a diffuse interface was considered. In particular we propose appropriate boundary conditions at the wall for such a model.
-
Dynamics of Hydrophobic Colloids in a Microfluidic Environment
… The aim was to detect and quantify the intrinsic slip phenomenon based on the dynamics of particle diffusion, which is expected to vary in the presence of a slip boundary condition. It was hypothesized that a particle experiencing slip would diffuse faster and have a smaller hydrodynamic radius. …
-
Droplet Flows In Microchannels Using Lattice Boltzmann Method
… is questionable as the validity of the no-slip boundary condition depends on the ratio of the mean free path of the fluid molecules to the characteristic dimension of the problem (called the Knudsen number). Macroscale equations can only be applied if Knudsen number is of the order of 10-3 …
-
Finite Element Studies in Injection Mold Filling
… performed for material properties and processing conditions corresponding to available experiments. Finite element solutions are obtained at high levels of fluid elasticity and they converge with mesh refinement, provided that a slip boundary condition is applied at the wall to alleviate the …
-
Studies of Particulate Rayleigh-B ́enard Convection
… particles, which can become trapped at the lower boundary of the domain due to their infinitesimal size and the no-slip boundary condition. The results reveal that changes in the particle-to-fluid density ratio significantly affect particle accumulation and velocity, highlighting the influence of …
-
A model of bank erosion and equilibrium bed topography in river bends
… Bridge (1992) model is modified to satisfy the condition of vanishing fluid flux through the banks, and to satisfy the non-slip boundary condition for the longitudinal velocity at the banks. The bank stability analysis accounts for the geotechnical characteristics of the bank materials, the …
Page 1 of 4