Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"Slip length"”.
-
Molecular dynamics and continuum simulations of fluid flows with slip boundary conditions
… in fluid mechanics is the no-slip boundary condition,which states that the tangential fluid velocity is equal to theadjacent wall speed. Although this assumption is successful indescribing fluid flows on macroscopic length scales, recentexperimental and numerical studies have …
-
Measurement and Control of Slip-Flow Boundary Conditions at Solid-Gas Interfaces
… similar to the mean free path, and thus partial slip is expected. This regime has become more important with increased focus on nano-scale devices, but there is currently no consensus on how the slip length should vary for different solids and gases, or whether it can be controlled. In this …
-
Boundary Conditions and Multi-Scale Modeling for Micro-and Nano-flows
… effects at wall-fluid interfaces, boundary slip and electroosmosis, through numerical simulations. The first study uses molecular dynamics (MD) simulations to probe the influence of surface curvature on the slip boundary condition for a simple fluid. The slip length is measured for flows in …
-
EFFECTS OF SLIP ON HIGHLY VISCOUS THIN-FILM FLOWS INSIDE VERTICAL TUBES (CONSTANT RADIUS, CONSTRICTED AND FLEXIBLE)
… Previous modeling studies have typically used no-slip boundary conditions, but in some applications the effects of slip at the boundary may not be negligible. We derive a long-wave model based on lubrication theory which allows for slippage along the boundary. Linear stability analysis verifies …
-
Effects of Nanoparticles on Friction Reduction in Fluid Flow
… in fluid mechanics and is the basis for the no-slip boundary condition in fluid dynamics. The slip behaviour of the fluid near the solid boundary, commonly quantified as the "slip length," is often used to quantify friction reduction. Nanoparticles (NPs) have been proposed to influence the fluid …
-
Analysis of Interfacial Processes on Non-Wetting Surfaces
… analytical solution is developed for effective slip length and, in turn, drag reduction and friction factor on structured non-wetting surfaces. Secondly, by combining the solution for effective slip length on structured non-wetting surfaces and the fractal characterization of generic multiscale …
-
Transient dynamics of a complex nano-particle in a viscous fluid
… translational motion of a porous sphere with a slip-surface. The particle's characteristics include radius a, density ρs , permeability parameter 𝛾, slip-length 𝑙, and effective viscosity-ratio 𝜖. The study assumes a low Reynolds number regime, ensuring negligible convective contributions, while …
-
High viscosity fluid drag reduction using hierarchically structured superoleophobic aluminum surfaces
… The defining property for drag reduction is the slip length which is theorized to increase proportionally with increasing fluid viscosity. However, oils typically violate this expected trend. In this work, a superoleophobic surface is fabricated from aluminum by generating a hierarchical …
-
Understanding water transport through graphene oxide membranes via structural variation
… affinities for water molecules, reducing the slip length within the GO nanochannels. Interestingly, an exponential decay relationship has been identified between the slip length and the hydrated diameter of intercalated cations. This observation is consistent with the Hagen-Poiseuille …
-
The Lattice Boltzmann Method For Flows With Slip And No-Slip Boundaries
… boundary conditions, different problems with no-slip and slip boundaries are simulated. The moment method is based on the specification of the appropriate hydrodynamic moments of LBM. Throughout this thesis, distinct collision operators of D2Q9 LBM are presented and examined; the models include …
-
Enhanced mass transport in graphene nanofluidic channels
… surface of graphene induces a boundary slip and enhances water flow inside the graphene nanochannel. The measured slip length of graphene in the graphene nanochannels poses a median value around 16 nm, albeit with a large variation from 0 to 200 nm regardless of the channel height. The …
-
WETTING ON THIN ELASTIC SHEETS: MODELING, ANALYSIS, AND COMPUTATION
… approximation. In the limit of vanishing slip length, we obtain an asymptotic relation for the contact line speed in terms of the apparent contact angles.
-
Water transport in Graphene Oxide laminates for membrane applications
… at these two GO d-spacings respectively. The slip length obtained from the velocity profile of the water pore flow in GO was found to range from 0.44 nm to 79 nm and was highly dependent on the distribution of hydroxyl functional groups on the pristine carbon. During the filtration of a 5 g …
-
Surfactants at fluid interfaces: molecular modeling and deep learning
… of sur factants. The first study investigates slippage modulation at brine–oil interfaces by surfactants, which is relevant to enhanced oil recovery operations. We identified a slip length of 1.2 nm at clean decane-brine interfaces. Introducing surfactants to the interface leads to an initial …
-
Scaling laws for stress and energy for interface with strong rate-weakening friction
… surface. Both the statistical properties of slip, pulling force and average rupture stress are studied with varying the constitutive parameters characterizing the model: the stiffness ratio and strength of the velocity-weakening. Longtime investigations suggest that firstly, a pulse- like …
-
Study of drag reduction in microstructured channel with patterned cavities and wettability control
… assumption. It is found that the effective slip length of preset interface assumption is in good agreement with the initially air-filled interface assumption, as well as the experimental results, at low gas fraction. However, the effective slip length of a preset interface has a dramatic …
-
Wall Slip of Polydisperse Linear Polymer Melts
… contrast to small molecule fluids, polymer melts slip on solid substrates sometimes to significant extents. Polymer slip has been under investigation over the past few decades, however detailed knowledge of the extent of slip of polydisperse polymers typical of industrial applications has not yet …
-
Hydrodynamics in solid state transport, from microscopic to mesoscopic scales
… electric potential. Assuming standard, no-slip boundary conditions, the spatial distribution of the current density is found to be much different to the one known for Ohmic conduction. For small frequency the current distribution has a parabolic profile across the channel, while for high …
-
Turbulent drag reduction through wall-forcing methods
… over hydrophobic surfaces with shear-dependent slip lengths and we report their drag-reduction properties. The laminar channel-flow and pipe-flow solutions are derived and the effects of hydrophobicity are quantified by the decrease of the streamwise pressure gradient for constant mass flow rate …
-
A microchannel based study of drag on deformable superhydrophobic walls
… the relevant quantities, including the slip length at the liquid-solid interface. The results from these measurements suggest that the drag onthese deformable superhydrophobic walls is due to a complex interplay between wall deformation and shear-free flow; in most cases, it is not …
Page 1 of 3