Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Slip regime"”.
-
Spatiotemporal variations of the local stress field and fault asperities at the North Anatolian Fault in NW Turkey analysed based on microseismic recordings
… is one of the largest currently active strike-slip fault in the world. In 1996 a permanent seismic network, the SApanca BOlu NETwork (SABONET) was deployed to investigate the seismic activity at the Karadere- and Düzce Fault. This region represents the eastern end of a westward migrating …
-
Experimental investigation of damping characteristics of bolted structural connections for plates and shells.
… until the structural joints moved into the total slip regime where the response becomes nonlinear. The maximum damping and maximum frequency shift were obtained just prior to this total slip. The greatest increase in damping was achieved with the introduction of viscoelastic material between …
-
STRESS STATE ANALYSIS AT CORNELL UNIVERSITY BOREHOLE OBSERVATORY (CUBO)
… magnitudes in this interval suggest a strike-slip regime, consistent with stress field indicators elsewhere within the Appalachian Basin of the northeast region of the USA. These results provide valuable insights for the design and stimulation of future wells.
-
Integrated wellbore stability analysis for well trajectory optimization and field development: the West Kazakhstan Field
… stresses and formation properties. The strike-slip regime was identified in the study field. Pore pressure was predicted in the interest intervals within the West Kazakhstan Field utilizing the Eaton method with significant modifications of the Eaton's compaction coefficients. The stochastic …
-
Petrologic Significance of Multiple Magmas in the Quottoon Igneous Complex, NW British Columbia and SE Alaska
… magmatic processes and evolving tectonic regimes that changed from a dominantly convergent to a dominantly strike-slip regime between 65 to 55 Ma. Heterogeneous suite I rocks (e. g. along Steamer Passage) have a pervasive solid-state fabric, abundant mafic enclaves and dikes, …
-
Magmatic-hydrothermal evolution and post-ore modifications of the Halilağa porphyry cu-au deposit, NW Turkey
… are dominated by a NE-SW dextral strike slip regime that is associated with the southern branch of the North Anatolian Fault System (NAF) and a N-S extensional regime. The Halilağa Cu-Au deposit, in central Biga Peninsula, is a porphyry system that also includes other mineralization types …
-
Reativações rúpteis de zonas de cisalhamento Pré-cambrianas na margem continental atlântica: bacias Sergipe-Alagoas e Pernambuco
… the Early Cretaceous under an extensional stress regime and (2) tectonic inversion induced by the Mid-Atlantic Ridge push and the Andean Cordillera rise in the Neogene-Quaternary under a predominantly strike-slip stress regime. During the rift phase, the shear zone reactivations controlled the …
-
Spatiotemporal variations of the components of seismic hazard in the Chilean subduction zone
… exhibits a clear margin-parallel compressional regime shown by the mostly reverse and strike-slip earthquakes in this area, while the analyzed portion of the Andean Precordillera shows a strike-slip regime with a compressional direction nearly parallel to the plate convergence direction. We …
-
Deformation bands and their relationship to syn-to post-Athabasca faulting and unconformity-related uranium deposits: A case study and comparison of the C1 fault corridor and WS shear zone (Gryphon and Phoenix deposits) in the eastern Athabasca Basin
… orientation data identified two major stress regimes associated with each fault corridor. The first stress regime (A) groups strike-slip (cover) and thrust (cover and basement) solutions at both localities wherein the principal stress (σ1) lies in the horizontal plane roughly perpendicular to …
-
Prediction of fretting fatigue life
… mainly in the fretting fatigue case (partial slip regime) where the contact zone is more complex compared to the gross slip regime. When the materials are subjected to fretting fatigue, the effect of the intrinsic materials properties is more pronounced than under plane fatigue conditions, …
-
Fretting fatigue in steel bolted connections
… was to determine the fatigue behaviour of slipcritical bolted connections when different bolt types and surface finishes are used. A325 high strength bolts and C50LR Huck tension control bolts were used as the different bolt types. As-received mill scale steel plates (Class A surface …
-
Thermomechanics of helical strands and helical-fiber-reinforced rods
… stiffness are elucidated. Second, in the no-slip regime, the existing Euler-Bernoulli framework for helical strands is extended. A Timoshenko rod model is established for helical strands, with a 6 by 6 stiffness matrix governed by five independent elastic moduli. The model is capable of …
-
Nanomechanical Characterisation of Diamond-Like Carbon Coatings for Tribological Performance
… and tribological behaviour under different wear regimes to be studied. To this end, three DLC variants have been produced; amorphous hydrogenated carbon, silicon-doped amorphous hydrogenated carbon and tungsten-doped amorphous hydrogenated carbon (a-C:H, Si:a-C:H and a-C:H:W) on two different …
-
Stress Distribution around Coal Seam Gas Wells, Application to Coal Failure Onset Prediction
… effect of wellbore trajectory and in situ stress regimes on coal failure. A mathematical model is also developed to estimate the stress distribution within the reservoir and evaluate the permeability during production from CSG reservoirs. The thesis chapters are divided in three parts. In the …
-
Structural and Temporal Constraints of Buffalo Valley Hot Springs and Proximal Young Volcanics, North-Central Nevada
… from the Walker Lane right-lateral strike-slip regime into Basin and Range extension. The resultant faults are both permeable and preferentially oriented for fluid flow in the northwest-directed extensional strain field. Within the Basin and Range, a handful of structural settings have been …
-
Mechanism of fretting corrosion at the modular taper interface of hip prosthesis
… wear at the interface leads to a mixed fretting regime whereby, the contact appear to be ‘cold-welded’ during a partial-slip regime and subsequently transitions to a gross slip fretting regime when the ‘welded’ interfacial material fractures. The phenomena was evident in both metal – metal and …
-
Wall Slip of Polydisperse Linear Polymer Melts
… contrast to small molecule fluids, polymer melts slip on solid substrates sometimes to significant extents. Polymer slip has been under investigation over the past few decades, however detailed knowledge of the extent of slip of polydisperse polymers typical of industrial applications has not yet …
-
Molecular Simulation of Chemically Reacting Flows Inside Micro/Nano-channels
… heat transfer of H₂/N₂ and H₂/N₂/CO₂ gas mixture slip flows in a plain micro-channel are simulated. The obtained results are compared to the corresponding data achieved from Navier-Stokes equations with slip/jump boundary conditions. Generally, very good agreements are observed between the two …
-
Seismo-mechanical reservoir characterization from fluid-induced seismicity
… depth was investigated. Normal faulting stress regime was observed at reservoir depth, while strike-slip regime appeared above and below the geothermal reservoir. Considering the long production history of The Geysers geothermal field, the changes in the stress regime were interpreted as an …
-
Supersonic Constricted Plasma Flows
… flow within the constricted discharge chamber. A slip boundary condition with the appropriate tangential momentum and thermal accommodation coefficients must be used to produce results that precisely match experimental measurements. The problem of including vacuum regions within a fluid simulation …
Page 1 of 2